LED Full Cutoff Wall Packs - Dark Sky Compliant

What are Full Cutoff LED Wall Packs?

LED full cutoff wall packs direct all illumination downward to eliminate upward light spill that creates glare and sky glow. Unlike traditional wall packs that scatter light in multiple directions, these fixtures use precision optics to focus every lumen on the intended coverage area. Full cutoff design meets Dark Sky compliance requirements while maximizing visibility and safety for walkways, parking areas, and building perimeters. The controlled light distribution reduces light trespass onto neighboring properties and creates uniform illumination patterns that enhance security coverage.

Selecting the Best Full Cutoff LED Wall Packs

Brightness requirements drive your initial selection, with most commercial applications needing between 2,000 to 8,000 lumens depending on mounting height and coverage area. We typically recommend 20-30 watts for standard building entrances and 40-80 watts for larger parking lot perimeters. Die-cast aluminum housing with polycarbonate lenses provides the durability needed for decades of outdoor exposure.

Consider adjustable wattage models that let you fine-tune light levels after installation without changing fixtures. Universal voltage drivers (120-277V) automatically adapt to your building's electrical system, simplifying installation planning. Motion sensor compatibility adds security functionality while reducing energy consumption during low-traffic periods. Beam angle selection matters significantly - Type III distribution works best for general area lighting, while Type V distribution suits corner mounting applications.

Advantages of LED Full Cutoff Wall Packs

Energy consumption drops dramatically compared to legacy HID technology. A 40-watt LED wall pack replaces a 150-watt metal halide fixture while delivering superior light quality and distribution. This reduction translates to 60-70% lower electricity costs plus reduced HVAC load from eliminated heat output.

• Operating life exceeds 50,000 hours with L70 rated performance, eliminating frequent lamp changes and reducing maintenance labor costs
• Instant-on capability provides full brightness immediately, unlike HID fixtures that require warm-up time
• IP65 weatherproof rating handles rain, snow, and temperature extremes from -40°F to 104°F
• Precise optical control prevents light pollution while maximizing ground-level illumination uniformity
• DLC Premium certification qualifies installations for maximum utility rebates and energy incentives

Controlling the Brightness of LED Wall Packs

Most commercial-grade wall packs include 0-10V dimming capability that integrates with building automation systems and occupancy sensors. Dimming functionality extends fixture life while providing adaptive lighting that responds to actual usage patterns. Motion sensor integration allows fixtures to operate at 20-30% output during vacant periods, then ramp to full brightness when activity is detected. This approach maintains security visibility while maximizing energy savings throughout the night.

How to Install LED Wall Packs

Mount fixtures to solid masonry or structural elements using the provided mounting bracket and appropriate fasteners for your wall material. Most installations require a 4-inch round or octagonal junction box recessed into the wall surface. Route supply wiring through the back entry point, connecting line voltage to the integral driver. Universal input drivers accept 120V through 277V without additional configuration. Professional installation ensures proper weathersealing around mounting points and electrical connections meet local code requirements.

Features to Consider When Buying LED Full Cutoff Wall Packs

Color temperature significantly impacts the lighting atmosphere and visibility quality. 3000K warm white creates welcoming illumination for building entrances and hospitality applications, while 5000K daylight provides crisp visibility that enhances security camera performance and matches existing metal halide installations.

Wattage selection depends on mounting height and coverage requirements. Standard 8-foot mounting heights work well with 20-40 watt fixtures, while 12-foot installations benefit from 60-80 watt models to maintain adequate ground-level illumination. Photocell integration enables automatic dusk-to-dawn operation without requiring separate timing controls. Emergency battery backup options keep critical lighting operational during power outages, meeting egress lighting requirements for commercial buildings.

LED Cost Savings and ROI

60W LED vs 250W Metal Halide Replacement (with ballast)

Based on 12 hours/day, 365 days/year at $0.15/kWh

Metal Halide (288W)

Annual: $188.89 | 5-Year Cost: $944.44 | 5-Year Savings: –

LED UFO Fixture (60W)

Annual: $39.42 | 5-Year Cost: $197.10 | 5-Year Savings: $7473.38

Single Fixture Annual Savings: $149.47 | 10 Fixture Annual Savings: $1495 | ROI Timeline: Under 12 months

Energy Reduction: 79% | 5-Year ROI: 5238% | Lamp Life: 50,000+ (LED) vs 15,000 (MH)

Safety and Performance Certifications

All our fixtures carry essential certifications, including DLC Premium, UL Listed, and ETL Listed approvals. These certifications ensure safety, performance, and energy efficiency while qualifying your project for utility rebates and tax incentives. DLC Premium certification guarantees the highest efficiency standards and maximum rebate eligibility.

5 Year Warranty and Warranty Support

All our lights come with at least a 5-year warranty, and all warranty support is based in the USA. We take customer support seriously, and helping you with a warranty claim is important to us. Our experienced support team understands the importance of keeping your lighting operational and will work quickly to resolve any warranty issues.

Expert Guidance for Your Wall Pack Project

LED Lighting Supply's product specialists bring decades of commercial lighting experience to help you avoid costly mistakes. Our team analyzes your site-specific requirements including mounting heights, spacing calculations, and Dark Sky compliance regulations to recommend the optimal wall pack configuration for your property. We create complimentary custom lighting plans that show precise fixture placement and photometric data, ensuring uniform coverage while eliminating over-lighting and dark spots. Our detailed energy savings calculations factor in your local utility rates and operating schedules to provide accurate ROI projections before you purchase. This expert consultation eliminates guesswork and ensures your wall pack selection delivers the performance and savings you need.