48 Watt Full Cutoff LED Wall Pack | 6400 Lumens | 5000K | 100-277V

Product Overview

The 48 Watt Full Cutoff LED Wall Pack is designed for exterior wall mounting on commercial and industrial buildings. This fixture delivers 6400 lumens at 5000K, providing a neutral white light suitable for perimeter and security lighting. The full cutoff design minimizes uplight and glare, supporting compliance with local lighting ordinances and dark sky requirements.

This wall pack is a direct replacement for 150W metal halide units, offering improved efficiency and reduced maintenance. Typical mounting heights range from 8 to 14 feet on building exteriors, including service areas, loading zones, and entry points.

Core Performance and Output

This fixture outputs 6400 lumens at 48 watts, achieving 133 lumens per watt. The 5000K color temperature provides clear visibility for exterior applications. The polycarbonate lens delivers a uniform forward throw distribution, supporting effective coverage along building perimeters and entryways.

Performance is optimized for wall mounting at standard exterior heights. Excessive output may occur if installed below 8 feet. At mounting heights above 14 feet, uniformity and ground-level illumination may decrease.

Adjustability and Control Options

This wall pack operates on 100-277V input and is compatible with standard switched circuits. The fixture does not include integrated dimming or motion sensing as standard. Photocell or control integration requires external devices or field modification.

The full cutoff housing directs light downward and outward, with no adjustable optics or aiming features. The fixture is designed for fixed wall mounting only.

Longevity and Reliability

The LED system is rated for 50,000 hours (L70), supporting multi-year operation with minimal lumen depreciation. The die-cast aluminum housing and polycarbonate lens provide resistance to impact and weather exposure.

Operating temperature range is -40°F to 113°F. The fixture maintains performance in typical exterior environments, including cold climates and summer heat. No routine re-lamping is required.

Build Quality and Physical Characteristics

The housing is constructed from die-cast aluminum with a bronze finish. The polycarbonate lens is impact-resistant and sealed to prevent water ingress. The fixture measures 11.7 inches long, 3.6 inches wide, and 8.6 inches deep, supporting compact installation on standard exterior walls.

IP65 rating ensures protection against dust and low-pressure water jets. All hardware is corrosion-resistant for long-term exterior use.

Where This Product Fits Best

This wall pack is suited for exterior wall mounting on commercial and industrial buildings where controlled, downward-directed illumination is required. Typical environments include building perimeters, service areas, and entry points.

• security lighting
• building facade lighting
• building exterior lighting
• commercial exterior wall lighting
• perimeter lighting
• entry lighting
• service area lighting
• loading area lighting

The fixture is suitable for wet locations and withstands outdoor exposure. Not intended for canopy, pole, or high-mount area lighting.

Installation and Long-Term Use

This fixture mounts directly to exterior walls using standard hardware. The compact form factor allows installation on masonry, concrete, or metal surfaces. All wiring is completed through the rear housing, with access provided for conduit entry.

Routine maintenance is limited to periodic cleaning of the lens and inspection of seals. No lamp replacement is required. The fixture is designed for long-term operation with minimal service intervention.

How This Fixture Is Commonly Used

Typical mounting heights range from 8 to 14 feet, depending on the area to be illuminated. Fixtures are spaced to provide overlapping coverage along building perimeters, entryways, and service zones. Layouts often use continuous runs or targeted placement at access points.

Higher output allows for wider spacing, but may increase glare if installed at lower heights or near reflective surfaces. Spacing and aiming should be coordinated with site security and safety requirements.

Safety, Certifications, and Warranty

This fixture is ETL listed and IP65 rated. It is suitable for wet locations and meets requirements for exterior commercial lighting. Power factor is greater than 0.90, and total harmonic distortion is less than 20%.

The product includes a 5-year warranty covering manufacturing defects and LED performance. All components are rated for exterior use and comply with standard safety codes.

Frequently Asked Questions

Q: What is the recommended mounting height for this wall pack?

A: Typical mounting height is 8 to 14 feet for optimal ground illumination and uniformity.

Q: Can this fixture be installed in wet locations?

A: Yes, the fixture is IP65 rated and suitable for wet location exterior use.

Q: Does this wall pack include a photocell or motion sensor?

A: No, integrated controls are not included. External photocells or sensors can be added as needed.

Q: What is the expected lifespan of the LEDs?

A: The LEDs are rated for 50,000 hours (L70), supporting multi-year operation without re-lamping.

Q: How should fixtures be spaced for perimeter lighting?

A: Spacing depends on mounting height and required light levels. Typical spacing is 2 to 3 times the mounting height for uniform coverage.

Application Questions and Clarification

Q: Is this fixture suitable for entryway lighting on commercial buildings?

A: Yes, it is commonly used for entry lighting and provides controlled, downward illumination at building entrances.

Q: Can this wall pack be used for loading area lighting?

A: Yes, it is suitable for loading area and service zone lighting when mounted at appropriate heights.

Q: Is this fixture appropriate for multifamily exterior lighting?

A: Yes, it can be used for multifamily exterior wall lighting, including perimeter and entry applications.

Q: Does the full cutoff design help with dark sky compliance?

A: Yes, the full cutoff housing minimizes uplight and supports compliance with dark sky requirements.