24 Watt Full Cutoff LED Wall Pack | 3100 Lumens | 5000K | 100-277V
Neil Peterson | CEO and Chief Lighting Specialist
Out of stock
Product Specifications
Key Features
| Brand | LED Lighting Supply |
| Watts | 24 |
| Lumens | 3100 |
| Lumens Per Watt | 129 |
| Replaces | 100 Watt Metal Halide |
| Voltage | 100V-277V |
| Color Temperature | 5000K |
| CRI | 70+ |
| Optics | Polycarbonate Lens |
| Lifespan | 50,000 (L70) hours |
| Mounting | Wall |
| Fixture Color | Bronze |
| Frequency (Hz) | 50/60 |
| Power Factor | > .90 |
| THD | < 20% |
Durable Construction
| Housing | Die-Cast Aluminum |
| IP Rating | IP65 |
| Operating Temperature | -40°F to 113°F |
| Certifications | ETL | Rebate Eligible |
| Warranty | 5 years |
Measurements
| Dimensions (in) | 11.7 X 3.6 X 8.6 |
Product Overview
This 24-watt full cutoff LED wall pack provides 3100 lumens at 5000K for exterior wall-mounted lighting. Its full cutoff form directs light downward and limits upward light from the fixture.
The fixture operates on 100-277V power and uses a bronze die-cast aluminum housing with a polycarbonate lens. It is a direct replacement for 100-watt metal halide wall packs.
Core Performance and Output
The fixture delivers 3100 lumens at 129 lumens per watt. The 5000K color temperature and 70+ CRI support clear exterior visibility.
The polycarbonate lens controls the light distribution below the fixture. At low mounting heights, 3100 lumens can produce excessive brightness when fixtures are placed too closely together.
Electrical operation is 100-277V, 50/60Hz, with power factor above 0.90 and THD below 20%.
Adjustability and Control Options
This wall pack is a fixed-output 24-watt fixture. No adjustable wattage, selectable color temperature, photocell, motion sensor, or dimming capability is stated in the supplied product data.
The full cutoff optical design is fixed through the fixture housing and lens configuration. Light direction is determined by wall location and mounting position.
Longevity and Reliability
The LED system is rated for 50,000 L70 hours. L70 represents the point at which light output reaches 70% of its initial level.
The fixture is rated for operation from -40F to 113F. Long-term performance depends on secure wall mounting, proper electrical connections, and maintaining the lens surface.
Build Quality and Physical Characteristics
The housing is die-cast aluminum with a bronze finish. A polycarbonate lens protects the optical assembly.
The fixture measures 11.7 x 3.6 x 8.6 inches. It is designed for wall mounting.
Where This Product Fits Best
This wall pack fits exterior walls where controlled downward light is needed around building edges, access points, and service-side areas. Its IP65 rating supports exterior exposure.
- building exterior lighting
- security lighting
- commercial exterior wall lighting
- entry lighting
- perimeter lighting
- service area lighting
The IP65 enclosure, die-cast aluminum housing, and -40F to 113F operating range support outdoor wall-mounted conditions. Fixture placement should keep the full cutoff distribution directed toward the intended exterior surface.
Installation and Long-Term Use
The fixture mounts directly to a wall and operates from 100-277V power. Verify wall condition, mounting surface integrity, and supply voltage before installation.
Mounting height affects light distribution and visible brightness below the wall pack. The lens should be kept clean during routine exterior maintenance to preserve light output.
How This Fixture Is Commonly Used
For building exterior lighting, security lighting, and commercial exterior wall lighting, fixtures are placed along wall sections where downward illumination is required. Entry lighting and service area lighting commonly use wall-mounted placement near the relevant exterior access point.
Mounting height is determined by wall geometry, target light levels, and the area requiring illumination. Spacing varies with mounting height and the required continuity of light along the wall.
Higher fixture spacing reduces the number of wall-mounted locations but can leave darker areas between fixtures. Closer spacing improves continuity but can increase brightness directly below each unit.
Safety, Certifications, and Warranty
This fixture is ETL listed and rebate eligible.
The enclosure is IP65 rated. The warranty is 5 years.
Frequently Asked Questions
Q: What is the light output of this LED wall pack?
A: This fixture produces 3100 lumens while consuming 24 watts.
Q: What voltage does this wall pack accept?
A: The fixture operates on 100-277V, 50/60Hz power.
Q: What metal halide fixture does this wall pack replace?
A: This wall pack replaces a 100-watt metal halide fixture.
Q: What factors affect wall pack placement?
A: Mounting height, target light levels, wall layout, and the required continuity of light affect fixture placement. A specific spacing value is not established by the supplied product data.
Application Questions and Clarification
Q: Is this fixture appropriate for building exterior lighting?
A: The fixture is designed for wall mounting and is IP65 rated for exterior use. Final placement depends on the wall layout and required light distribution.
Q: Can this wall pack be used for entry lighting?
A: Entry lighting is a valid application for this wall pack. Mounting position should direct the full cutoff distribution toward the intended entry area.
Q: What should be confirmed for security lighting layouts?
A: Confirm the mounting height, target light levels, wall layout, and required continuity of light. The supplied data does not establish a specific spacing value or coverage area.
Web ID: 1813
