150 Watt LED Shoebox Area Light | 19972 Lumens | 5000K | 100-277V | Type 3 | Silver or Black Housing

Product Overview

This 150 watt LED shoebox area light delivers 24,000 lumens at 160 lumens per watt, with a 5000K color temperature and 70+ CRI. It operates on 100V-277V input with a 277V-480V option available. The fixture replaces 400 watt or 1000 watt metal halide systems.

The housing is die-cast aluminum with a bronze finish, measuring 15.63 x 11.25 x 3.22 inches and weighing 9.5 pounds. A polycarbonate lens protects the optics. The fixture includes a 5-foot cord length.

Beam angle options include Type 5 standard distribution and Type 3 as an optional configuration. Mounting methods include wall, yoke, arm, and slip fitter installations.

Where This Product Fits Best

This fixture is designed for outdoor area lighting applications where metal halide systems are being replaced or where new LED installations require high-output coverage. The 150 watt output and 24,000 lumen delivery address parking lots, loading areas, building perimeters, and general site lighting.

The IP65 rating allows installation in locations exposed to rain, dust, and washdown spray. The IK08 rating provides resistance to moderate physical impact. Operating temperature range spans -22°F to 113°F, supporting installations in cold climates and warm environments.

With an EPA rating of 1.5, the fixture presents a defined wind load profile for pole and arm mounting calculations. The 100V-277V standard voltage range covers most commercial service configurations, with 277V-480V available for industrial electrical systems.

Performance and Functional Considerations

At 160 lumens per watt, this fixture produces 24,000 lumens from 150 watts of input power. The 5000K color temperature delivers a cooler, daylight-range appearance suited to security and visibility-focused applications. A 4000K option is available for installations where a warmer tone is preferred.

Rated lifespan is 244,000 hours at L70, meaning the fixture will maintain at least 70% of initial light output over that period. Power factor exceeds 0.92 and total harmonic distortion remains below 15%, which supports stable operation on commercial electrical systems.

Surge protection is rated at 6kV line-to-line and 10kV line-to-earth, providing protection against transient voltage events common in outdoor electrical infrastructure. This fixture does not support dimming.

Installation and Long-Term Use

Four mounting methods are supported: wall, yoke, arm, and slip fitter. The slip fitter option allows direct pole-top installation on standard 2-3/8 inch outside diameter tenons. The 9.5 pound weight and compact housing dimensions simplify handling during installation.

The die-cast aluminum housing resists corrosion and dissipates heat effectively. IP65 construction seals the fixture against water jets and dust ingress. IK08 impact resistance protects against incidental contact or debris.

An optional photocell can be added for dusk-to-dawn operation. A motion sensor is available as an accessory for occupancy-based control. The 5-foot cord provides flexibility for wiring connections during installation.

How This Fixture Is Commonly Used

Once installed, this fixture operates as a fixed-output area light. The Type 5 distribution spreads light in a square or circular pattern outward from the pole, which works well for general lot coverage. Type 3 distribution concentrates light in a forward throw pattern, suited for roadway edges or linear pathways.

If a photocell is installed, the fixture turns on automatically at dusk and off at dawn without manual intervention. Facilities that need occupancy-based response can add a motion sensor to activate the fixture when movement is detected in the coverage zone.

The 5000K output is commonly selected for security applications where cooler light improves camera clarity and visibility. Facilities preferring a less stark appearance may select the 4000K option. The bronze housing finish blends with common pole and building colors in commercial properties.

Safety, Certifications, and Warranty

This fixture is ETL listed and DLC Premium qualified. The 100V-277V configuration carries a 10-year warranty. The 277V-480V configuration carries a 5-year warranty.

Surge protection is built in at 6kV line-to-line and 10kV line-to-earth. The operating temperature range of -22°F to 113°F defines the environmental limits for safe, continuous operation.

Frequently Asked Questions

What metal halide wattage does this fixture replace?
This fixture replaces 400 watt or 1000 watt metal halide systems.

What voltage options are available?
The standard configuration operates on 100V-277V. A 277V-480V option is available.

Is this fixture DLC listed for utility rebates?
Yes. This fixture is DLC Premium qualified.

What mounting options are supported?
Wall, yoke, arm, and slip fitter mounting methods are supported.

What is the warranty coverage?
The 100V-277V version includes a 10-year warranty. The 277V-480V version includes a 5-year warranty.

What beam angle options are available?
Type 5 distribution is standard. Type 3 distribution is available as an option.

Is the fixture rated for wet locations?
The fixture carries an IP65 rating, which allows exposure to rain and direct water spray.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.