54 Watt LED Street Retrofit Lamp | 7200 Lumens | 5000K | 150 Watt Replacement

Product Overview

This 54 watt LED street retrofit lamp delivers 7200 lumens at 5000K color temperature, designed as a direct replacement for 150 watt metal halide lamps in existing street light fixtures. The lamp operates at 133 lumens per watt with a CRI of 80+.

The retrofit design allows installation into existing street light housings without fixture replacement. At 9.6 x 4.4 x 3.1 inches and 2 pounds, the lamp fits standard cobrahead and shoebox-style street light enclosures that previously ran 150 watt metal halide.

Operating voltage spans 100V-277V at 50/60 Hz with a power factor of .9. The lamp carries a 50,000 hour rated lifespan and is backed by a 5 year warranty.

Where This Product Fits Best

This lamp is built for roadway, parking lot, and area lighting applications where existing metal halide street light fixtures are still in service. Facilities with cobrahead, shoebox, or post-top fixtures running 150 watt metal halide can retrofit to LED without replacing the entire fixture assembly.

The 90 x 150 degree beam angle produces an asymmetric light pattern suited to linear coverage along roadways and pathways. This beam spread throws light forward and to the sides rather than directly downward, matching the distribution pattern expected from traditional street lighting.

Municipalities, commercial property managers, and facility operators maintaining legacy street light infrastructure are the primary users. The lamp fits applications where full fixture replacement is not practical or not budgeted.

Performance and Functional Considerations

At 7200 lumens from 54 watts, this lamp reduces energy consumption compared to the 150 watt metal halide it replaces while maintaining usable light output. The 133 lumens per watt efficacy reflects current LED retrofit performance levels.

The 5000K color temperature produces a cool white light typical of modern street lighting. CRI of 80+ provides adequate color rendering for roadway and parking area applications where general visibility is the primary requirement.

Power factor of .9 indicates the lamp draws current efficiently relative to its wattage rating. The 100V-277V input range covers standard commercial and municipal electrical systems without requiring voltage-specific versions.

Installation and Long-Term Use

The lamp installs into existing mogul base sockets in street light fixtures. Physical dimensions of 9.6 x 4.4 x 3.1 inches and weight of 2 pounds should be verified against the existing fixture enclosure to confirm clearance and mounting orientation.

Rated lifespan of 50,000 hours translates to extended service intervals compared to metal halide sources, which typically require relamping every 15,000 to 20,000 hours. This reduces the frequency of bucket truck dispatches for roadway fixtures.

The 5 year warranty covers the lamp against manufacturing defects during the initial service period. UL listing confirms the lamp meets safety requirements for installation in listed fixtures.

How This Fixture Is Commonly Used

Once installed, this lamp operates automatically with the existing photocell or contactor control already in place on the street light circuit. No additional programming or configuration is required at the lamp level.

The asymmetric 90 x 150 degree beam angle is oriented during installation to throw light along the roadway or parking aisle. Proper orientation of the lamp within the fixture housing determines the final light distribution pattern on the ground.

Facility and municipal maintenance crews treat this lamp as a drop-in component. When the lamp eventually reaches end of life, replacement involves standard relamping procedures using the existing mogul socket.

Safety, Certifications, and Warranty

This lamp is UL listed and rebate eligible. The 5 year warranty is provided by LED Lighting Supply.

Operating temperature range and wet or damp location ratings are not specified. Confirm environmental suitability with our team if the fixture is installed in an exposed or extreme-temperature location.

Frequently Asked Questions

What metal halide wattage does this lamp replace?
This lamp is designed to replace 150 watt metal halide lamps in street light fixtures.

What voltage does the lamp accept?
The lamp operates on 100V-277V input at 50/60 Hz.

Is this lamp eligible for utility rebates?
The lamp is listed as rebate eligible. Contact your local utility to confirm program requirements and rebate amounts.

What is the warranty coverage?
LED Lighting Supply provides a 5 year warranty on this lamp.

What is the beam angle?
The lamp produces a 90 x 150 degree asymmetric beam pattern designed for street and roadway lighting distribution.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.