200 Watt LED Area Flood Light | 28000 Lumens | 5000K | 100V-277V or 277V-480V | Optional Marine Grade Finish

Product Overview

This 200 Watt LED Area Flood Light is designed for high-output exterior lighting in demanding commercial and industrial environments. It delivers 28,000 lumens at 5000K, providing a direct replacement for 400W metal halide flood fixtures. The fixture is suitable for mounting heights typically ranging from 18 to 35 feet, depending on site requirements and beam angle selection.

Available with slip fitter or trunnion mounting, this flood light is built for area illumination, sports field lighting, and security applications. The optional marine grade finish meets ISO 12944 C4 for use in coastal or corrosive environments.

Core Performance and Output

This fixture outputs 28,000 lumens at 140 lumens per watt, supporting both wide and narrow beam distributions. Standard 60° optics are included, with optional 10°, 15°, 30°, 45°, and 40x100° beam angles for targeted or broad coverage. The 70+ CRI provides adequate color rendering for outdoor and sports environments.

1-10V dimming is standard. The fixture operates on 100-277V or 277-480V input, supporting a range of site electrical systems. Excessive output may cause glare or over-lighting at mounting heights below 18 feet. Uniformity may decrease at mounting heights above 35 feet, especially with narrow optics.

Adjustability and Control Options

Slip fitter and trunnion mounting options allow for precise aiming and orientation. The fixture supports 1-10V dimming for integration with compatible controls or manual adjustment of light levels. Multiple beam angle options enable adaptation to site-specific requirements, from wide area coverage to focused sports field illumination.

No onboard occupancy or daylight sensors are included. External controls can be added as required by the project.

Longevity and Reliability

The fixture is rated for 176,000 hours (L70), supporting long-term operation with minimal maintenance. The LED driver and components are protected by 6kV line-line and 10kV line-earth surge protection. Operating temperature range is -22°F to 113°F, suitable for most outdoor climates.

IP66 and IK08 ratings provide resistance to dust, water, and moderate impact. The optional marine grade finish extends corrosion resistance for coastal or salt-exposed sites.

Build Quality and Physical Characteristics

The housing is powder coated aluminum with polycarbonate optics and a tempered glass lens. The fixture measures 12 in W x 12.7 in H x 4.7 in D and weighs 13 lbs. A 5-foot cord is standard for wiring flexibility. EPA rating is 1.36, supporting use on poles or brackets exposed to wind loads.

All hardware and finishes are designed for outdoor durability. The marine grade option meets ISO 12944 C4 for enhanced corrosion protection.

Where This Product Fits Best

This flood light is suited for exterior area lighting, sports field illumination, and security applications where high output and robust construction are required. It is commonly installed in:

• area lighting
• outdoor sports facility lighting
• building facade lighting
• security lighting
• baseball field lighting
• parking lot lighting
• event venue lighting
• airport apron lighting

IP66 and IK08 ratings support use in exposed outdoor locations. The marine grade finish is available for coastal, port, or shipyard environments.

Installation and Long-Term Use

Slip fitter and trunnion mounts allow attachment to poles, walls, or structural brackets. The fixture?s EPA rating and weight are compatible with standard area lighting poles and crossarms. A 5-foot cord provides flexibility for wiring during installation.

Routine inspection of mounting hardware and electrical connections is recommended. In marine or corrosive environments, select the marine grade finish for extended service life. No special maintenance is required beyond standard exterior fixture practices.

How This Fixture Is Commonly Used

This flood light is typically mounted at heights between 18 and 35 feet, depending on the application and required coverage. For sports fields and large areas, fixtures are spaced to achieve uniform illumination, with layout varying by beam angle and site geometry.

Higher output allows for wider spacing and reduced fixture count, but may increase glare if not aimed or shielded appropriately. Narrow beam options are used for focused lighting on fields or facades, while wide optics are selected for general area coverage.

Safety, Certifications, and Warranty

This fixture is ETL listed and DLC Premium qualified. It is rated IP66 for water and dust ingress and IK08 for impact resistance. Surge protection is built in. The marine grade finish meets ISO 12944 C4. A 5-year warranty covers the fixture and LED components.

All safety and certification requirements for commercial exterior lighting are met. No additional safety measures are required beyond standard installation practices.

Frequently Asked Questions

Q: What mounting options are available for this flood light?

A: Slip fitter and trunnion mounts are available for pole or surface installation.

Q: What is the recommended mounting height for this fixture?

A: Typical mounting heights range from 18 to 35 feet, depending on the application and beam angle.

Q: Can this fixture be used in coastal or marine environments?

A: The optional marine grade finish meets ISO 12944 C4 for use in coastal or corrosive locations.

Q: What is the EPA rating and why does it matter?

A: The EPA rating is 1.36, which determines wind load suitability for pole mounting.

Q: How should fixtures be spaced for sports field lighting?

A: Spacing depends on beam angle, mounting height, and required light levels; narrower beams allow for longer throws and wider spacing.

Application Questions and Clarification

Q: Is this fixture suitable for baseball field lighting?

A: Yes, it is commonly used for baseball field lighting with appropriate beam angle selection and mounting height.

Q: Can this be used for parking lot lighting?

A: Yes, it is suitable for parking lot lighting when mounted on poles or building perimeters.

Q: Is this fixture appropriate for airport apron lighting?

A: Yes, the output and durability support use in airport apron and similar high-demand exterior areas.

Q: Does the fixture support integration with external lighting controls?

A: Yes, 1-10V dimming is standard and can be connected to compatible external controls.