12 Foot HVLS Ceiling Fan | 6 Blades | 8,500 Square Foot Coverage | 36,500 CFM

Product Overview

This 12 foot HVLS ceiling fan uses a 5-blade aluminum design and is built for large commercial and industrial spaces. The fan is powered by a 0.5 HP PMSM motor and operates at a maximum speed of 100 RPM.

The fan delivers up to 176,574 CFM and is rated to cover up to 4,100 square feet. It operates on either 208-240V or 380-480V, single or three phase, and is controlled by a wall-mounted VFD.

The fan is finished in silver and includes a 2 foot downrod. The total weight is 143 lbs.

The fan is rated IP55 for the fixture and IP66 for the controller. Sound level is measured at 38 dB during operation.

Where This Product Fits Best

This fan is designed for use in large open areas such as warehouses, manufacturing floors, distribution centers, and sports venues. The 12 foot diameter and high CFM output support air movement across wide spaces.

The IP55 rating allows installation in locations where dust or water exposure is possible, while the IP66 controller can be mounted in areas with higher moisture or dust levels.

Voltage compatibility with both 208-240V and 380-480V systems allows integration into a range of commercial and industrial electrical infrastructures.

The fan is suitable for facilities requiring low-noise operation, with a sound level of 38 dB.

Performance and Functional Considerations

The 5-blade aluminum design provides consistent airflow and durability in demanding environments. The fan is capable of moving large volumes of air at low speeds, supporting occupant comfort and air circulation.

Variable speed control is managed through a wall-mounted VFD, allowing adjustment to match seasonal or operational needs. The 0.5 HP PMSM motor is designed for efficiency and long-term reliability.

The 2 foot downrod positions the fan at an effective height for most standard and high-ceiling installations. The fan?s 143 lb weight requires secure mounting to structural supports.

With a maximum RPM of 100, the fan maintains airflow without excessive noise or vibration.

Installation and Long-Term Use

The fan is designed for overhead mounting using the included 2 foot downrod. Installation requires structural support capable of handling the 143 lb weight and dynamic loads during operation.

Electrical connection supports both single and three phase power at 208-240V or 380-480V. The wall-mounted VFD controller should be installed within reach for operational adjustments and must be mounted in a location suitable for its IP66 rating.

Routine maintenance is limited due to the sealed motor and durable aluminum blades. The IP55 rating allows for installation in areas where occasional dust or water exposure occurs, reducing concerns about environmental wear.

Long-term use is supported by the robust motor and blade construction. The fan?s low sound level supports use in occupied spaces without introducing disruptive noise.

How This Fixture Is Commonly Used

Once installed, the fan is typically operated using the wall-mounted VFD controller. You can adjust the speed to increase or decrease airflow as needed for comfort or process requirements.

The 5-blade design provides stable, even air movement across the coverage area. The aluminum blades are resistant to corrosion and physical damage, so the fan can be relied on for continuous operation in industrial settings.

With the IP55 rating, you do not need to take special precautions for dust or light water exposure during normal facility cleaning or operation. The controller?s IP66 rating allows it to be mounted in areas where washdown or heavy dust is present.

Day-to-day, the fan operates quietly at 38 dB, so it does not interfere with communication or create distractions in the workspace.

Safety, Certifications, and Warranty

The fan is rated IP55, which allows it to tolerate dust and water spray in typical industrial environments. The controller is rated IP66 and can be installed in locations with higher exposure to dust or water jets.

The fan is covered by a 2 year warranty from LED Lighting Supply.

All ratings and warranty terms are based on the provided specifications.

Frequently Asked Questions

What voltage does this fan support?
This fan operates on 208-240V or 380-480V, single or three phase.

What is the coverage area?
The fan is rated to cover up to 4,100 square feet.

What are the environmental ratings?
The fan is rated IP55. The controller is rated IP66.

What is the warranty period?
LED Lighting Supply provides a 2 year warranty for this fan.

What is the mounting method?
The fan is designed for overhead mounting using a 2 foot downrod.

Is this fan DLC or ETL listed?
No DLC or ETL listings are specified in the provided data.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.