10 Foot HVLS Ceiling Fan | 6 Blades | 2,500 Square Foot Coverage

Product Overview

This is a 14 foot diameter HVLS ceiling fan with five aluminum blades. The fan is powered by an 800 watt PMSM direct drive motor and supports variable speed operation from 25 to 75 RPM.

The fan is designed for coverage up to 4,900 square feet. It operates at a sound level below 40 dBA and weighs 75 pounds. The standard finish options are black or silver.

It is supplied with a wall-mounted VFD controller and remote control. The standard downrod length is 59 inches, with custom options available.

The fan is compatible with 208V-240V single phase power, with 277V-480V options available. The standard mounting method is I-beam.

Where This Product Fits Best

This fan is suited for large open spaces where air movement is needed across areas up to 4,900 square feet. Typical environments include warehouses, manufacturing floors, distribution centers, and sports venues.

The IP57 rating allows use in locations where dust and water exposure are present. The low sound output supports use in occupied spaces where noise is a concern.

The 14 foot diameter and five-blade design are intended for high ceilings and unobstructed mounting locations. The fan is not suited for low ceilings or areas with significant overhead obstructions.

Standard I-beam mounting supports installation in facilities with exposed structural steel. Custom downrod lengths can address unique ceiling heights or clearance requirements.

Performance and Functional Considerations

The 800 watt PMSM direct drive motor provides consistent torque and efficient operation across the full speed range. Variable speed control allows adjustment from 25 to 75 RPM to match seasonal or occupancy needs.

The fan draws 1.28 amps at 220V. It is compatible with 208V-240V single phase power as standard, with 277V-480V options available for facilities with higher voltage supply.

The IP57 rating means the fan is protected against dust ingress and can withstand water exposure, supporting use in demanding industrial or commercial environments.

The aluminum blade construction reduces weight and resists corrosion. The fan?s low sound level supports use in areas where quiet operation is required.

Installation and Long-Term Use

The fan is designed for I-beam mounting as standard. The 59 inch downrod provides clearance for most high bay installations; custom downrod lengths are available for non-standard ceiling heights.

The wall-mounted VFD controller and remote control allow for flexible placement and day-to-day speed adjustment. The direct drive motor reduces maintenance requirements compared to belt-driven systems.

The fan?s 75 pound weight should be considered when planning mounting and structural support. All electrical connections must match the specified voltage and phase requirements.

Long-term durability is supported by the aluminum blade construction and IP57 environmental protection. Warranty coverage is 15 years mechanical, 5 years motor, and 3 years electrical as provided by LED Lighting Supply.

How This Fixture Is Commonly Used

After installation, you can adjust fan speed directly from the wall-mounted VFD controller or by using the remote control. This allows you to set airflow based on occupancy, temperature, or process needs without accessing the fan itself.

The five-blade design and 14 foot diameter provide broad, even air movement across large open areas. This helps with temperature balancing and occupant comfort in high bay spaces.

The low sound output means the fan can run during shifts or events without disrupting communication or creating background noise issues. The aluminum blades and direct drive motor require minimal ongoing maintenance.

The IP57 rating allows you to operate the fan in environments where dust or water exposure is present, without concern for damage under normal conditions.

Safety, Certifications, and Warranty

This fan is rated IP57 for dust and water resistance. It is suitable for use in environments where airborne particulates or water spray are present.

Warranty coverage from LED Lighting Supply is 15 years mechanical, 5 years motor, and 3 years electrical.

The fan?s low sound level supports safe operation in occupied spaces. The aluminum blade construction reduces risk of corrosion over time.

All installation and operation should follow applicable electrical and safety codes for the facility.

Frequently Asked Questions

What voltage does this fan support?
This fan is compatible with 208V-240V single phase power. 277V-480V options are available.

What is the coverage area?
The fan is designed for coverage up to 4,900 square feet.

What is the environmental rating?
This fan is rated IP57 for dust and water resistance.

What mounting method is supported?
Standard mounting is I-beam. Custom downrod lengths are available.

What warranty is provided?
LED Lighting Supply provides a 15-year mechanical, 5-year motor, and 3-year electrical warranty.

Is this fan DLC or ETL listed?
No DLC or ETL listings are specified in the provided data.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.