24 Foot HVLS Ceiling Fan | 6 Blades | 18,300 Square Foot Coverage | 208-240V or 380-480V

Product Overview

This is a 24-foot diameter HVLS ceiling fan with six aluminum blades and a silver finish. The fan is designed for large commercial and industrial spaces requiring high-volume air movement.

It operates with a variable speed controller mounted on the wall, using a VFD for precise adjustment. The fan uses a 2 HP, 1500-watt PMSM motor and supports both single-phase and three-phase power at 208-240V or 380-480V, 50/60 Hz.

The fan produces up to 547,378 CFM and is rated for a coverage area of 18,300 square feet. The maximum speed is 60 RPM, and the sound level is 38 dB during operation.

The fan weighs 345 lbs and includes a 39-inch downrod for mounting. The fan carries an IP55 rating, and the controller is rated IP66.

Where This Product Fits Best

This fan is suited for large open areas such as warehouses, manufacturing plants, distribution centers, and sports venues. The 24-foot diameter and high CFM output are intended for spaces requiring broad, even air movement.

It is compatible with facilities that have ceiling heights and structural support adequate for a 345 lb fan and a 39-inch downrod. The fan is suitable for environments where low sound levels are important, with a 38 dB operating noise.

Facilities with available 208-240V or 380-480V power, single or three phase, can use this fan. The IP55 fan rating and IP66 controller rating allow use in locations where dust and water exposure are present but not extreme.

Performance and Functional Considerations

The fan delivers up to 547,378 CFM at a maximum speed of 60 RPM, supporting air movement across up to 18,300 square feet. The variable speed controller allows adjustment to match seasonal or operational needs.

The 2 HP PMSM motor is designed for efficiency and reliability in continuous operation. Six aluminum blades provide consistent airflow and resist corrosion in typical industrial environments.

The fan operates at a low sound level of 38 dB, minimizing disruption in occupied spaces. The IP55 fan rating protects against dust and water jets, while the controller’s IP66 rating allows for installation in areas with higher exposure to water or dust.

Installation and Long-Term Use

The fan is supplied with a 39-inch downrod for ceiling mounting. The total weight is 345 lbs, so structural support must be verified before installation.

The wall-mounted VFD controller provides variable speed adjustment and should be installed in a location accessible to facility staff. The fan supports both single-phase and three-phase wiring at 208-240V or 380-480V, 50/60 Hz.

Routine inspection of mounting hardware and electrical connections is recommended for long-term reliability. The aluminum blades are designed for durability and require minimal maintenance under normal conditions.

How This Fixture Is Commonly Used

After installation, the fan is typically set to a speed that matches the comfort or ventilation needs of the space. The wall-mounted controller allows you to adjust speed as occupancy or temperature changes.

Facility staff can rely on the fan for consistent air movement across large areas, reducing stagnant zones and supporting even temperature distribution. The low sound level means the fan can run during occupied hours without adding significant noise.

The IP55 fan and IP66 controller ratings allow the fan to be used in areas where dust or water exposure is present, such as near loading docks or in manufacturing zones. The aluminum blades hold up well in environments where humidity or airborne particulates are present.

Safety, Certifications, and Warranty

The fan carries an IP55 rating, allowing operation in environments with dust and water jets. The controller is rated IP66, supporting installation in locations with higher dust or water exposure.

The fan is covered by a 2-year warranty from LED Lighting Supply.

Frequently Asked Questions

What voltage does this fan support?
This fan operates on 208-240V or 380-480V, single-phase or three-phase, 50/60 Hz.

What is the coverage area?
The fan is rated for up to 18,300 square feet.

What are the environmental ratings?
The fan is rated IP55. The controller is rated IP66.

What is the warranty period?
LED Lighting Supply provides a 2-year warranty on this fan.

What is the mounting method?
The fan is designed for ceiling mounting using the included 39-inch downrod.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.