16 Foot HVLS Ceiling Fan | 5 Blades | 6,400 Square Foot Coverage

Product Overview

This 16 Foot HVLS Ceiling Fan is engineered for large-scale air movement in commercial and industrial environments. It features a 5-blade design with a 16-foot diameter, powered by an 800W PMSM direct drive motor. The fan is designed for high-volume, low-speed operation, providing consistent airflow coverage up to 6,400 square feet. Typical installations include warehouses, manufacturing facilities, and agricultural buildings with open floor plans and high ceilings.

The fan includes a wall-mounted VFD controller with remote control capability, allowing for variable speed adjustment. Standard mounting is I-Beam, and the fan is supplied with a 59-inch downrod for optimal clearance and performance. The IP57 rating supports use in environments where dust and moisture are present.

Core Performance and Output

This HVLS fan delivers variable speed operation from 25 to 75 RPM, driven by an 800W direct drive motor. The 5 aluminum blades are designed for efficient, uniform air distribution across large open spaces. At full speed, the fan covers up to 6,400 square feet, supporting effective ventilation and destratification in high-ceiling environments.

Sound output remains below 40 dB, minimizing noise impact in occupied spaces. The fan?s performance is optimized for mounting heights of 20 feet and above. Excessive output may occur at lower mounting heights, and coverage may be reduced in spaces with significant obstructions or compartmentalization.

Adjustability and Control Options

The fan is equipped with a wall-mounted VFD controller, supporting variable speed adjustment to match seasonal or operational requirements. Remote control functionality is included for convenient operation from the floor or mezzanine level. The controller supports both 50Hz and 60Hz operation, compatible with 208V-240V input as standard, with 277V-480V available as an option.

Speed can be adjusted to balance airflow, comfort, and energy use. The system allows for integration into facility management routines, with straightforward manual or remote adjustment as needed.

Longevity and Reliability

The direct drive PMSM motor is engineered for long service life with minimal maintenance. The fan?s mechanical components are covered by a 15-year warranty, with 5 years on the motor and 3 years on electrical components. The IP57 rating provides protection against dust ingress and water exposure, supporting reliable operation in demanding environments.

Aluminum blades resist corrosion and deformation, maintaining balance and performance over time. Routine inspection of mounting hardware and electrical connections is recommended for long-term reliability.

Build Quality and Physical Characteristics

The fan features a 16-foot diameter with five precision-formed aluminum blades. The total weight is 120 lbs, and the supplied 59-inch downrod provides adequate clearance for most high-ceiling installations. The I-Beam mounting system is standard, supporting secure attachment to structural steel.

All exposed components are finished in black or silver. The IP57 enclosure protects the motor and electronics from dust and water spray. The fan is designed for continuous operation in commercial and industrial settings.

Where This Product Fits Best

This HVLS fan is suitable for large, open environments requiring high-volume air movement and destratification. It is commonly installed in facilities with ceiling heights above 20 feet and minimal obstructions to airflow.

• warehouse ventilation
• manufacturing facility ventilation
• gymnasium ventilation
• agricultural building ventilation
• aircraft hangar ventilation
• distribution center ventilation
• convention center ventilation
• large retail ventilation

The fan?s IP57 rating and aluminum construction support use in dusty, humid, or partially open environments. It is not intended for low-ceiling spaces or areas with heavy compartmentalization that restricts airflow.

Installation and Long-Term Use

Standard installation uses the I-Beam mounting system with a 59-inch downrod, suitable for most industrial roof structures. The fan requires a dedicated 208V-240V circuit, with optional compatibility for 277V-480V systems. The wall-mounted VFD controller should be installed in an accessible location for routine operation and maintenance.

Routine maintenance includes periodic inspection of mounting hardware, blade condition, and electrical connections. The direct drive motor eliminates the need for belt or gearbox servicing. The fan is designed for continuous operation and can be integrated into facility ventilation schedules.

How This Fixture Is Commonly Used

Typical mounting heights range from 20 to 40 feet, with the fan positioned to maximize coverage in open areas. Spacing between fans is determined by the 6,400 square foot coverage area, with overlap in larger facilities to ensure uniform airflow. Fans are often installed above work zones, storage areas, or assembly lines to support occupant comfort and process efficiency.

Higher speed settings increase air movement but may require greater spacing to avoid excessive draft. Lower speeds are used for gentle destratification or background ventilation. Layout and control settings are adjusted based on seasonal needs and facility occupancy patterns.

Safety, Certifications, and Warranty

This fan is IP57 rated. All electrical and mechanical components are designed for compliance with commercial and industrial safety standards. The fan includes a 15-year mechanical warranty, 5-year motor warranty, and 3-year electrical warranty.

Installation must follow all local codes and manufacturer guidelines for mounting, wiring, and controller placement. Safety cables and secondary supports are recommended for overhead installations in occupied spaces.

Frequently Asked Questions

Q: What is the recommended mounting height for this 16-foot HVLS fan?

A: The fan is designed for mounting heights of 20 feet or higher to ensure optimal airflow and coverage.

Q: How much area does this fan effectively cover?

A: The fan provides effective air movement for up to 6,400 square feet in open, unobstructed spaces.

Q: What type of mounting is included?

A: Standard mounting is I-Beam, with a 59-inch downrod supplied for adequate clearance.

Q: Can the fan speed be adjusted remotely?

A: Yes, the wall-mounted VFD controller includes remote control functionality for speed adjustment.

Q: What is the sound level during operation?

A: The fan operates at less than 40 dB, minimizing noise in occupied areas.

Q: Is this fan suitable for humid or dusty environments?

A: Yes, the IP57 rating supports use in environments with dust and moisture exposure.

Q: How should I plan fan spacing in a large facility?

A: Spacing is based on the 6,400 square foot coverage area per fan, with overlap as needed for uniform airflow in larger or irregular spaces.

Application Questions and Clarification

Q: Is this fan appropriate for livestock facility ventilation?

A: Yes, the fan is commonly used in livestock and agricultural buildings for high-volume air movement.

Q: Can this fan be installed in a convention center?

A: Yes, it is suitable for large, open convention centers with high ceilings and minimal obstructions.

Q: Is this fan compatible with distribution center ventilation needs?

A: Yes, the fan is frequently installed in distribution centers to support air circulation and occupant comfort.

Q: Does the fan require special electrical service?

A: The fan operates on 208V-240V as standard, with 277V-480V available as an option. A dedicated circuit is recommended.