20 Foot HVLS Ceiling Fan | 5 Blades | 10,000 Square Foot Coverage

Product Overview

This is a 24 foot diameter HVLS ceiling fan with a 5-blade design. The fan is designed for large-scale air movement in commercial and industrial spaces.

It operates on either 208-240V or 380-480V, supporting both single-phase and three-phase power. The fan uses a PMSM motor rated at 2 HP (1500 Watt).

The fan delivers a maximum airflow of 547,378 CFM and covers up to 18,300 square feet. The variable speed is controlled by a wall-mounted VFD.

The fan is finished in silver and uses aluminum blades. The total weight is 345 lbs, and it ships with a 39-inch downrod.

Where This Product Fits Best

This fan is suitable for large open areas where consistent air movement is required. Typical applications include warehouses, manufacturing plants, distribution centers, and sports venues.

The 18,300 square foot coverage area supports use in high-ceiling environments where air stratification is a concern. The low sound level of 38 dB allows for installation in spaces where noise is a consideration.

The IP55 fan rating and IP66 controller rating allow for use in environments where dust and water exposure may occur, provided these conditions are within the scope of the ratings.

Voltage compatibility with both 208-240V and 380-480V systems allows integration into a range of facility electrical infrastructures.

Performance and Functional Considerations

The fan operates at a maximum speed of 60 RPM, providing high-volume, low-speed air movement. The variable speed function allows adjustment to match seasonal or operational needs.

The 2 HP PMSM motor is designed for continuous operation in demanding environments. The aluminum blades offer durability and resistance to corrosion.

The wall-mounted VFD controller provides direct speed adjustment and is rated for use in environments requiring IP66 protection.

The 39-inch downrod supports installation in high-ceiling spaces, ensuring optimal air distribution below the fan.

Installation and Long-Term Use

The fan weighs 345 lbs and requires structural support capable of handling both static and dynamic loads. The 24 foot diameter and 39-inch downrod require adequate overhead clearance and unobstructed space for safe operation.

Electrical connection supports both single-phase and three-phase power at 208-240V or 380-480V. The fan is compatible with 50 or 60 Hz systems.

The IP55 rating allows the fan to tolerate dust and water spray, while the controller?s IP66 rating allows for installation in locations where direct water exposure may occur.

Routine maintenance is limited to periodic inspection and cleaning of blades and motor housing, as required by site conditions.

How This Fixture Is Commonly Used

Once installed, the fan is typically operated using the wall-mounted VFD controller. You can adjust the speed to increase or decrease airflow as needed for occupant comfort or process requirements.

The low sound level allows the fan to run during occupied hours without disrupting communication or workflow. The aluminum blades require minimal maintenance and can be cleaned as part of routine facility upkeep.

The fan is often left running for extended periods to maintain consistent air movement, especially in large spaces where temperature stratification is a concern.

Adjustments to speed or operation schedule are made directly at the controller, allowing you to respond to seasonal changes or shifts in facility use.

Safety, Certifications, and Warranty

The fan carries an IP55 rating, allowing it to tolerate dust and water spray in industrial environments. The controller is rated IP66, supporting installation in areas with direct water exposure.

The fan is covered by a 2-year warranty as provided by LED Lighting Supply.

All installation and operation should follow applicable safety guidelines for overhead equipment and electrical connections.

Refer to the provided documentation for any additional safety requirements specific to your facility or region.

Frequently Asked Questions

What voltage does this fan support?
This fan operates on 208-240V or 380-480V, single-phase or three-phase.

What is the coverage area?
The fan covers up to 18,300 square feet.

What are the environmental ratings?
The fan is rated IP55. The controller is rated IP66.

What is the warranty period?
LED Lighting Supply provides a 2-year warranty for this fan.

What is the mounting method?
The fan is supplied with a 39-inch downrod for ceiling mounting.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.