Light Pole Components: A Comprehensive Guide
Light poles are essential infrastructure in many outdoor lighting applications. Pole heights vary by project, and poles provide mounting locations for lighting fixtures used in parking lots, highways, residential streets, pathways, and other exterior areas.
While light poles may appear simple in design, they incorporate multiple engineered components that affect functionality, safety, and service life. This guide covers common components and considerations for LED parking lot lights, LED highway lights, and LED street light applications.
Light Pole Materials
Several materials are used in light pole construction, each with distinct advantages and limitations:
Wood Poles
- Often cost-effective and readily available
- Can be relatively lightweight for handling and installation
- Non-conductive material, although the completed electrical system must still be properly installed and grounded as required
- May be affected by decay, fire exposure, insects, and preservative-treatment requirements
Concrete Poles
- High strength with resistance to rot and fire
- Available in a range of configurations, including precast designs
- Heavy weight may require specialized transportation and lifting equipment
- Modifications and field alterations may be limited by the manufacturer
Steel Poles
- High strength and durability for many outdoor applications
- Can support single- or multi-fixture configurations when designed for the applicable loads
- Electrically conductive and requires proper grounding and bonding where required
- Requires an appropriate coating system and maintenance approach for the environment
Aluminum Poles
- Lightweight construction with a high strength-to-weight ratio
- Generally corrosion resistant, including in many coastal applications when the alloy, finish, hardware, and mounting details are suitable
- Service life depends on environmental exposure, loading, maintenance, and product construction
- May have a higher initial cost than some alternatives
Fiberglass Poles
- Lightweight and corrosion-resistant construction
- Non-conductive material
- Service life depends on product construction, UV exposure, loading, and environmental conditions
- UV resistance varies by manufacturer, resin system, and protective coating
Light Pole Configurations
Square vs. Round Poles
Light poles are available in several cross-sectional shapes, including square and round designs. Round poles are often tapered, with a larger base diameter and smaller top diameter. Pole shape, taper, wall thickness, and shaft design should be selected using the manufacturer’s published loading information and project requirements.
Installation Methods
Anchor-based poles mount to a designed concrete foundation using an anchor-bolt assembly, nuts, and washers. This configuration can simplify pole replacement or maintenance when properly designed and installed.
Direct burial poles (embedded poles) are installed with a portion of the shaft below grade. Required embedment depth, backfill or concrete details, and installation procedures must follow the specific pole manufacturer’s instructions and the applicable site engineering. They cannot be determined from pole height alone.
Essential Light Pole Components
Access and Maintenance Components
Hand-hole cover plates provide access for electrical connections and maintenance. Covers, fastening hardware, and grounding provisions should be installed in accordance with the pole and electrical equipment instructions.
Base covers and plates can enclose anchor-bolt hardware and provide a finished appearance. The pole base plate transfers loads to the foundation through the anchor-bolt assembly and bearing surface.
Mounting Hardware
Tenons are cylindrical mounting sections attached to the pole top or used with mounting adaptors. A 2-3/8-inch outside-diameter tenon is common, while other diameters and configurations are available. Verify that the tenon size, fixture mounting method, brackets, and complete assembly are compatible with the pole manufacturer’s loading limits.
Pole caps provide weather protection when the pole top is not used for fixture mounting.
Foundation Hardware
Anchor bolts, nuts, and washers secure anchor-based poles to their foundations. Anchor-bolt diameter, length, projection, bolt-circle dimensions, hook or plate configuration, reinforcement, and concrete foundation dimensions must match the specific pole manufacturer’s foundation drawing or an engineered project design.
Important: Anchor-bolt and foundation requirements depend on the complete pole assembly, including pole model and height, fixture quantity and weight, effective projected area (EPA), brackets or bullhorns, mounting geometry, site wind criteria, soil conditions, frost depth, foundation design, and applicable local codes. Do not select anchor bolts or foundation dimensions from pole height alone.
Specialty Components
Vibration dampers may be specified where a pole design, fixture configuration, or site conditions create a vibration concern. Their use should follow manufacturer recommendations or project engineering.
Side brackets enable additional fixtures for accent lighting or building facade illumination. Added fixtures and brackets change pole loading and must be included in the pole loading evaluation.
Electrical outlets may provide power access for maintenance or temporary equipment when included in a listed, properly installed pole assembly and protected as required by the applicable electrical code.
Banner brackets accommodate banners and signage. Banner size, wind exposure, bracket configuration, and attachment hardware must be within the pole manufacturer’s published loading limits.
Conduit and wiring protection may be used to protect conductors where required by the applicable electrical installation method, pole design, and local code. Verify conductor routing and wiring requirements with the pole and fixture manufacturer.

Professional Installation Requirements
Safety Notice: Light pole installation involves electrical work, lifting operations, and structural foundations. Installation should be performed by qualified professionals in accordance with applicable electrical codes, building codes, manufacturer instructions, and project engineering requirements.
Proper pole selection depends on multiple factors, including fixture weight and EPA, bracket configuration, wind loading, soil conditions, foundation design, and local environmental conditions. LED Lighting Supply can help review published pole and fixture specifications and prepare lighting plans, but the project engineer, installer, and authority having jurisdiction determine structural and code-compliance requirements.
Conclusion
Understanding light pole components is essential for selecting an appropriate outdoor lighting solution. Each component contributes to the system’s performance, safety, and service life. For detailed specifications and installation guidance, explore our comprehensive selection of light poles and street lighting pole solutions.
