Need help choosing the right Product?
Get expert recommendations and a custom lighting plan within 1 day! Get Product Recommendations ➜
25 Foot Above Grade Round Fiberglass Light Pole | 5.75 Inch Diameter | Direct Burial
Product Description
Key Features
- Total Height: 29 Feet
- Height Above Grade: 25 Feet
- Buried Depth Below Grade: 4 Feet
- Material: Fiberglass
- Pole Weight: 75 lbs
- Pole Diameter: 5.75 in Base | 5.3 in Tip
- Pole Finish: Acrylic Enamel
- Pole Color: Bronze | Black | White | Gray | Custom
- Pole Installation: Direct Burial
- Warranty: 15 years
- EPA at 70 mph: 4.5
- EPA at 80 mph: 4
- EPA at 90 mph: 3.5
- EPA at 100 mph: 3
Disclaimer: LED Lighting Supply is not responsible for improper loading of light fixtures or other attachments, improper use, or foundation design of light poles. We act solely as a supplier of lighting solutions, including metal halide replacement fixtures and parking lot light poles. Final pole assembly and installation are the responsibility of the purchaser.
Dimensions and specifications for round or square composite light poles are subject to change without notice. Please refer to the current data sheet for the most up-to-date specifications. Custom sizing is available only for large-quantity orders. Pole caps may be used in place of other mounting options when required.
Composite light poles are covered by a 15-year workmanship warranty, which warrants that the poles are free from manufacturing defects-including weld and structural integrity issues-at the time of shipment. Any pole found to be defective, upon examination, during normal use and service within 15 years from the date of shipment will be repaired or replaced at our discretion. This warranty does not cover damage resulting from external factors, misuse, or normal wear and tear.
Web ID: 2657
Product Overview
This is a 25-foot above grade round fiberglass light pole with a 5.75-inch base diameter, tapering to 5.3 inches at the tip. Total pole length is 29 feet, with 4 feet designed for direct burial below grade. The pole weighs 75 pounds.
The fiberglass construction provides corrosion resistance and eliminates concerns associated with metal poles in corrosive or coastal environments. An acrylic enamel finish is applied to the exterior surface. Standard color options include bronze, black, white, and gray, with custom colors available.
Where This Product Fits Best
This pole is appropriate for parking lots, pathways, building perimeters, and similar outdoor areas where a 25-foot mounting height is needed. The direct burial installation method suits sites where anchor base mounting is not required or where below-grade foundation work is preferred over surface-mounted bases.
Fiberglass construction makes this pole well-suited for coastal properties, chemical processing facilities, wastewater treatment plants, and other locations where salt air, moisture, or chemical exposure would accelerate corrosion on steel or aluminum poles. The 75-pound weight simplifies handling compared to equivalent steel poles.
Performance and Functional Considerations
Wind load capacity is defined by Effective Projected Area ratings at four wind speed thresholds. At 70 mph, the pole supports fixtures and arms with a combined EPA up to 4.5 square feet. At 80 mph, the EPA limit is 4 square feet. At 90 mph, the limit drops to 3.5 square feet, and at 100 mph, the maximum EPA is 3 square feet.
These EPA ratings determine which fixture and arm combinations can be mounted based on the design wind speed for your location. Fixture manufacturers publish EPA values for their products, and the total EPA of the luminaire, arm, and any accessories must fall within the pole''s rating for the applicable wind speed.
Installation and Long-Term Use
This pole installs using the direct burial method, with 4 feet of the pole set below grade. Proper burial depth and soil compaction are necessary to achieve the rated wind load capacity. Local soil conditions and frost depth requirements may influence installation procedures.
The acrylic enamel finish protects the fiberglass surface and maintains appearance over time. Fiberglass does not rust, corrode, or require sacrificial anodes or grounding for cathodic protection. The material is non-conductive, which may simplify electrical considerations in certain installations.
How This Fixture Is Commonly Used
Facility operators typically select this pole when corrosion resistance is a priority or when the reduced weight simplifies equipment and labor requirements during installation. The 25-foot above grade height provides appropriate elevation for area lighting in parking lots and pedestrian spaces.
The tapered round profile offers a clean visual appearance suitable for commercial properties, educational campuses, and retail locations. Color selection allows the pole to match existing site elements or architectural standards. Custom colors accommodate specific branding or design requirements when standard options are not suitable.
Safety, Certifications, and Warranty
This pole carries a 15-year warranty.
Fiberglass poles are non-conductive and do not present the same grounding considerations as metal poles. Electrical connections and grounding practices should follow applicable codes and the requirements of the fixtures being installed.
Frequently Asked Questions
What is the total length of this pole?
The total length is 29 feet. When installed with 4 feet below grade, 25 feet remains above grade.
What fixture weight and size can this pole support?
Fixture compatibility is determined by EPA ratings, not weight alone. At 70 mph design wind speed, the pole supports up to 4.5 square feet EPA. At 100 mph, the maximum is 3 square feet. Verify that your fixture and arm combination falls within the EPA limit for your site''s wind speed requirement.
What colors are available?
Standard colors are bronze, black, white, and gray. Custom colors are available.
Is this pole suitable for coastal installations?
Fiberglass does not corrode from salt air or moisture exposure, making it appropriate for coastal and marine-adjacent environments.
What is the warranty period?
This pole includes a 15-year warranty.
Application Questions and Clarification
This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.
