24 / 32 / 40 Watt Adjustable LED Shop Strip Light | 3120 to 5200 Lumens | 3500K / 4000K / 5000K Adjustable | 100-277V

Product Overview

The 24 / 32 / 40 Watt Adjustable LED Shop Strip Light is a surface-mounted linear fixture designed for general-purpose shop and maintenance area lighting. This model features selectable wattage and color temperature, allowing adaptation to a range of small to mid-sized workspaces. Typical use cases include workshops, garages, and service bays where reliable, uniform illumination is required for task visibility and safety.

This fixture is commonly installed as a direct replacement for 2-lamp fluorescent strips or low-wattage metal halide shop lights. The adjustable output and color temperature make it suitable for both retrofit and new installations where flexibility is needed. The form factor and mounting method are optimized for low to moderate ceiling heights, typically between 8 and 14 feet.

Core Performance and Output

This shop strip light delivers selectable output at 24, 32, or 40 watts, producing 3120 to 5200 lumens with an efficacy of 130 lumens per watt. The frosted lens provides diffuse, low-glare illumination suitable for task and general area lighting. Color temperature can be set to 3500K, 4000K, or 5000K to match existing lighting or user preference.

1-10V dimming is standard, supporting integration with compatible controls for energy management or occupancy-based operation. At maximum output, this fixture is best suited for mounting heights up to 14 feet. Excessive output may cause glare in low-ceiling environments below 8 feet. Uniformity may decrease if spacing exceeds recommended distances for the selected wattage.

Adjustability and Control Options

Wattage and color temperature are field-selectable via onboard switches, allowing adjustment during installation or future reconfiguration. This supports changes in task requirements or space usage without fixture replacement. The fixture supports 1-10V dimming for integration with standard dimming systems or occupancy sensors.

No onboard motion sensor is included. Controls integration is limited to external 1-10V dimming devices. Color and wattage adjustments require access to the fixture housing.

Longevity and Reliability

This fixture is rated for 50,000 hours (L70) at typical operating conditions. The LED array and driver are designed for consistent performance over the rated life, minimizing maintenance intervals in shop and service environments. Power factor exceeds 0.90, supporting stable operation across the full input voltage range.

Galvanized steel housing and a frosted polycarbonate lens provide resistance to impact and routine handling. The fixture is suitable for continuous operation in ambient temperatures typical of indoor shop spaces.

Build Quality and Physical Characteristics

The housing is constructed from galvanized steel with a white finish. The fixture measures 46 inches in length, 3.23 inches in width, and 3.68 inches in height, with a total weight of 4.8 lbs. The frosted lens ensures even light distribution and reduces direct glare.

Surface mounting hardware is included. No cord is supplied; wiring is completed via standard conduit or whip connections. The fixture is designed for flush or surface ceiling installation in finished or utility spaces.

Where This Product Fits Best

This adjustable LED shop strip light is intended for indoor environments where task and general lighting are required at low to moderate mounting heights. It is most commonly used in workspaces where flexibility in output and color temperature is needed to accommodate changing tasks or user preferences.

• workshop lighting
• maintenance shop lighting
• garage lighting
• service bay lighting
• small warehouse lighting
• tool room lighting
• automotive shop lighting
• equipment repair lighting

The fixture is suitable for dry or damp indoor locations. It is not intended for wet locations, corrosive environments, or areas requiring vapor-tight or hazardous location ratings.

Installation and Long-Term Use

Surface mounting is standard, with direct attachment to ceiling or overhead structure. The lightweight design allows for single-person installation in most cases. All wiring is completed via hardwired connections; no plug-in option is provided.

Routine cleaning of the frosted lens is recommended to maintain light output. Color and wattage adjustments can be made post-installation by accessing the fixture housing. No special tools are required for standard maintenance.

How This Fixture Is Commonly Used

This fixture is typically installed in rows or as single units, depending on the size and layout of the workspace. Mounting heights range from 8 to 14 feet, with spacing determined by the selected wattage and required light levels. For general shop lighting, fixtures are often spaced 6 to 12 feet apart.

Higher output settings reduce the number of fixtures needed but may increase perceived glare in smaller rooms. For task-intensive areas, closer spacing or lower wattage settings may be preferred to balance uniformity and comfort.

Safety, Certifications, and Warranty

This fixture is UL listed. It meets standard safety and performance requirements for commercial and industrial indoor lighting. The product is eligible for utility rebates where applicable.

A 5-year warranty covers defects in materials and workmanship under normal operating conditions. No additional safety features or emergency backup are included as standard.

Frequently Asked Questions

Q: What is the recommended mounting height for this shop strip light?

A: Recommended mounting height is 8 to 14 feet, depending on the selected wattage and desired light levels.

Q: Can the color temperature and wattage be changed after installation?

A: Yes, both color temperature and wattage are field-adjustable by accessing the fixture housing.

Q: Is this fixture compatible with motion sensors or occupancy controls?

A: The fixture supports 1-10V dimming and can be integrated with external controls, but does not include an onboard sensor.

Q: What is the typical spacing for uniform lighting in a shop or garage?

A: Typical spacing is 6 to 12 feet between fixtures, adjusted based on wattage and required light levels.

Q: Is this fixture suitable for wet or corrosive environments?

A: No, this fixture is intended for dry or damp indoor locations only.

Application Questions and Clarification

Q: Can this shop strip light be used in small warehouse or tool room applications?

A: Yes, it is commonly installed in small warehouse, tool room, and similar support spaces within its output and mounting range.

Q: Is this fixture appropriate for use in automotive service bays?

A: Yes, it is suitable for automotive shop and service bay lighting at standard ceiling heights.

Q: Does this fixture meet requirements for hazardous or vapor-tight locations?

A: No, it is not rated for hazardous or vapor-tight environments. Use only in standard indoor shop and maintenance areas.