30 / 40 / 50 Watt Adjustable LED Vapor Tight Light | 3900 to 6500 lumens | 3000K / 4000K / 5000K Adjustable | 100-277V | 4 Foot

Product Overview

This is a 4-foot LED vapor tight fixture with selectable wattage and color temperature. It is designed for wet, dusty, or corrosive environments where protection from moisture and impact is required. Typical use includes replacing 100W or 150W metal halide fixtures in locations such as washdown areas, parking garages, and cold storage spaces.

The fixture operates on 100-277V and provides 3900 to 6500 lumens, with field-adjustable output and color temperature. Surface mounting is standard, and the fixture is suitable for both new installations and retrofit projects in demanding utility and service environments.

Core Performance and Output

This fixture delivers 3900, 5200, or 6500 lumens depending on the selected wattage (30W, 40W, or 50W). Efficacy is 130 lumens per watt. The 120° beam angle provides wide, even coverage for general area illumination. Color temperature can be set to 3000K, 4000K, or 5000K as needed for the application.

0-10V dimming is standard. The fixture is suitable for mounting heights up to 12?16 feet in most environments. Output may be excessive for low-ceiling utility rooms or stairwells if set to maximum wattage. Uniformity can be affected if spacing exceeds recommended distances for the selected output.

Adjustability and Control Options

Wattage and color temperature are both field-adjustable via onboard switches. This allows tuning of light levels and color to match site requirements or user preference. The fixture supports 0-10V dimming for integration with compatible controls.

A motion sensor accessory is available for occupancy-based control. This can reduce energy use in intermittently occupied spaces such as service pits or parking garages.

Longevity and Reliability

The fixture is rated for 70,000 hours of L70 life. The polycarbonate lens and ABS housing provide resistance to impact and environmental stress. IP65 and IK08 ratings confirm suitability for wet locations and areas with moderate physical abuse.

Operating temperature range is -40°F to 113°F. The fixture is designed for continuous operation in cold storage, washdown, or covered outdoor environments. Maintenance requirements are minimal compared to legacy fluorescent or HID fixtures.

Build Quality and Physical Characteristics

The housing is injection-molded thermoplastic ABS with a gray finish. The lens is polycarbonate for impact resistance. The fixture measures 47.2 inches long, 4.3 inches wide, and 3.5 inches high, with a weight of 5 lbs.

Surface mounting hardware is included. The fixture is designed for quick installation and secure attachment to ceilings or overhead structures. A 3-foot cord is standard for electrical connection.

Where This Product Fits Best

This vapor tight fixture is intended for wet, damp, or dusty environments where durability and ingress protection are required. It is commonly used in utility and service areas, as well as locations with frequent washdown or exposure to moisture.

• washdown area lighting
• parking garage lighting
• cold storage lighting
• utility room lighting
• food processing lighting
• car wash lighting
• stairwell lighting
• outdoor covered walkway lighting

IP65 and IK08 ratings support use in environments with water spray, condensation, or moderate impact risk. The fixture is not intended for direct submersion or hazardous locations.

Installation and Long-Term Use

Surface mounting is standard, with hardware provided for attachment to concrete, steel, or wood substrates. The fixture is designed for single-person installation and can be wired using the included 3-foot cord. Field adjustability of wattage and color temperature allows tuning after installation.

Routine cleaning is supported by the sealed housing and lens. No relamping is required. For long-term use, periodic inspection of seals and mounting hardware is recommended in high-moisture or corrosive environments.

How This Fixture Is Commonly Used

Typical mounting heights range from 8 to 16 feet, depending on the application and selected wattage. Fixtures are often spaced 8 to 12 feet apart for uniform coverage in parking garages, washdown areas, or cold storage rooms. In stairwells or utility rooms, closer spacing may be required for code compliance or task illumination.

Higher output settings reduce the number of fixtures needed but may increase glare in confined spaces. Motion sensors are frequently used in parking garages or service pits to reduce energy use during periods of low occupancy.

Safety, Certifications, and Warranty

This fixture is UL listed and DLC Premium qualified. It carries an IP65 rating for water and dust ingress, and an IK08 rating for impact resistance. The fixture is suitable for use in wet locations and meets requirements for covered outdoor and washdown environments.

A 5-year warranty is standard. All components are rated for commercial and industrial use. No special maintenance procedures are required beyond routine inspection and cleaning.

Frequently Asked Questions

Q: What is the maximum recommended mounting height for this fixture?

A: The fixture is suitable for mounting heights up to 16 feet, depending on the selected wattage and required light levels.

Q: Can the fixture be installed in areas with frequent washdown or water spray?

A: Yes, the IP65 rating supports installation in washdown areas and locations exposed to water spray.

Q: Is the wattage and color temperature adjustable after installation?

A: Both wattage and color temperature can be adjusted in the field using onboard switches.

Q: What type of dimming is supported?

A: The fixture supports 0-10V dimming for use with compatible controls.

Q: How should fixtures be spaced for uniform lighting in a parking garage?

A: Spacing of 8 to 12 feet is typical, but actual layout depends on mounting height, selected wattage, and required light levels.

Application Questions and Clarification

Q: Is this fixture suitable for food processing areas?

A: Yes, the fixture is commonly used in food processing lighting applications due to its sealed, easy-to-clean design.

Q: Can this fixture be used in cold storage rooms?

A: The fixture operates reliably down to -40°F and is suitable for cold storage lighting.

Q: Is this fixture appropriate for stairwell lighting?

A: Yes, it is frequently used in stairwells, but output should be set to match the space to avoid excessive brightness.

Q: Does the fixture support motion sensors for occupancy control?

A: A motion sensor accessory is available for occupancy-based control in areas such as parking garages or service pits.