34 / 38 / 45 Wattage Adjustable LED Vapor Tight Light | 4900 to 6500 Lumens | 3500K / 4000K / 5000K Adjustable | 100-277V | 4 Foot

Product Overview

This 2-foot LED vapor tight fixture delivers 3,550 lumens at 25 watts, producing 142 lumens per watt. It replaces 100-watt metal halide fixtures in applications where moisture, dust, and debris are present. The polycarbonate housing and lens provide impact resistance while maintaining a sealed enclosure.

The fixture operates on 100-277V input at 50-60Hz with a power factor greater than 0.95. Color temperature is field-adjustable between 4000K and 5000K, allowing selection based on the working environment. CRI is rated at 80+, and the standard beam angle is 120 degrees.

Overall dimensions are 23.66 inches long by 4.48 inches wide by 3.54 inches high. The fixture weighs 4 pounds and has a white finish. Rated lifespan is 70,000 hours.

Where This Product Fits Best

This fixture is intended for spaces where lighting equipment is exposed to moisture, washdown, particulates, or general contamination. The IP65 rating means the enclosure is protected against dust ingress and low-pressure water jets from any direction. Typical locations include food processing areas, cold storage, mechanical rooms, parking structures, stairwells, and covered outdoor walkways.

At 25 watts and 3,550 lumens, this 2-foot fixture suits areas with lower ceiling heights or supplemental lighting needs where full-size vapor tights would be excessive. The 100-277V input handles most commercial and industrial voltage configurations without modification.

Performance and Functional Considerations

The 4000K and 5000K color options are selected at the fixture before or during installation. This allows the same unit to serve applications requiring neutral white light or cooler daylight tones depending on task visibility or preference. Once selected, the color temperature remains fixed unless manually changed.

Dimming is available via 0-10V control. This requires compatible dimming infrastructure at the site. The 120-degree beam angle produces broad, even distribution suitable for general area lighting rather than focused task illumination.

Installation and Long-Term Use

The fixture mounts directly to a surface. The polycarbonate construction keeps weight low at 4 pounds, which simplifies handling during installation and reduces structural load on mounting surfaces. The sealed IP65-rated housing does not require additional weatherproofing or gasketing in exposed environments.

With a 70,000-hour rated lifespan, the fixture is designed for extended service intervals. The polycarbonate lens resists yellowing and impact damage better than acrylic alternatives in environments with temperature swings or physical exposure.

How This Fixture Is Commonly Used

Facilities replacing 100-watt metal halide vapor tights typically install this fixture in the same locations without layout changes. The 25-watt draw reduces electrical load while maintaining comparable light output. The color temperature switch allows adjustment at installation to match existing fixtures or meet site-specific visibility requirements.

In washdown or humid environments, the sealed housing eliminates the need for periodic resealing or gasket replacement. The 0-10V dimming input integrates with building automation systems or manual dimmers where occupancy-based or time-based control is in place.

Safety, Certifications, and Warranty

This fixture is UL listed and rebate eligible. The IP65 rating confirms suitability for wet and dusty locations.

We provide a 5-year warranty on this fixture.

Frequently Asked Questions

What voltage does this fixture require?
The fixture accepts 100-277V input at 50-60Hz, covering standard commercial and industrial electrical systems.

Can I select the color temperature?
Yes. The fixture is adjustable between 4000K and 5000K. Selection is made at the fixture.

Is this fixture dimmable?
Yes. It supports 0-10V dimming when connected to a compatible dimmer or control system.

What does the IP65 rating mean for my application?
The fixture is protected against dust accumulation and can withstand water spray from any direction, making it suitable for wet, dirty, or washdown environments.

What does this fixture replace?
It is designed to replace 100-watt metal halide vapor tight fixtures.

Is this fixture eligible for utility rebates?
Yes. The fixture is rebate eligible.

What is the warranty coverage?
We provide a 5-year warranty on this fixture.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.