20 / 25 / 30 Watt Adjustable LED Vapor Tight Light | 2680 to 4020 Lumens | 3500K / 4000K / 5000K Adjustable | 100-277V | 2 Foot

Product Overview

This is a 2-foot LED vapor tight fixture with selectable wattage and color temperature, designed for wet, dusty, or corrosive environments where durability and ingress protection are required. The fixture supports 20, 25, or 30 watt operation, delivering up to 4020 lumens, and is suitable for mounting heights typically found in walk-in coolers, car washes, and utility spaces. The polycarbonate housing and lens provide impact resistance and protection against water and debris, making it a direct replacement for 100W metal halide vapor tight fixtures in demanding locations.

Commonly installed in washdown areas, parking garages, and cold storage facilities, this fixture is built for continuous operation in environments with moisture, condensation, or chemical exposure. The adjustable output and color temperature allow adaptation to specific site requirements without the need for multiple SKUs or fixture types.

Core Performance and Output

This fixture offers selectable output at 20, 25, or 30 watts, producing 2680, 3350, or 4020 lumens respectively. The efficacy is 134 lumens per watt, supporting energy-efficient operation in enclosed or semi-enclosed spaces. The 120° beam angle provides wide, even coverage suitable for low to moderate mounting heights, typically between 8 and 14 feet.

Color temperature can be set to 3500K, 4000K, or 5000K, supporting both neutral and cool white requirements. The fixture operates on 100-277V input and maintains a power factor above 0.95. At higher mounting heights, light levels may decrease and uniformity may be reduced, especially in open layouts. Excessive output at very low mounting heights can increase glare in confined spaces.

Adjustability and Control Options

Wattage and color temperature are field-selectable via onboard switches, allowing adjustment during installation or maintenance. This supports changes in light level or color rendering without replacing the fixture. No onboard dimming is provided; output is fixed at the selected wattage.

The fixture is compatible with standard switched circuits and does not support 0-10V or other external dimming protocols. Control is limited to manual selection and on/off switching at the circuit level.

Longevity and Reliability

The fixture is rated for 100,000 hours (L70), supporting long-term use in continuous or frequent on/off cycles. The polycarbonate housing and lens provide IK10 impact resistance, reducing risk of damage from accidental contact or cleaning equipment.

Ingress protection is IP66, preventing water and dust intrusion during washdown or in humid environments. The fixture is designed for minimal maintenance, with no lamps or ballasts to replace. Reliability is supported by a 5-year warranty.

Build Quality and Physical Characteristics

The housing and lens are constructed from polycarbonate, providing chemical resistance and durability in harsh environments. The fixture measures 24.8 inches long, 5 inches wide, and 3.5 inches high, with a total weight of 4 lbs. The white finish supports cleanroom and food area requirements.

Mounting options include surface mounting or suspension via V-hooks. The fixture does not include a cord; wiring is completed via conduit or direct connection. The lens is sealed to the housing to maintain ingress protection during cleaning or exposure to spray.

Where This Product Fits Best

This fixture is designed for wet, damp, or corrosive environments where protection from water, dust, and impact is required. It is suitable for both indoor and covered outdoor locations with moderate mounting heights and exposure to washdown or cleaning processes.

• washdown area lighting
• cold storage lighting
• parking garage lighting
• utility room lighting
• car wash lighting
• food processing lighting
• stairwell lighting
• outdoor covered walkway lighting

The fixture maintains performance in environments with high humidity, condensation, or chemical exposure. It is not intended for high bay or open exterior applications where higher output or specialized optics are required.

Installation and Long-Term Use

Surface or V-hook mounting supports installation on ceilings, walls, or structural members. The fixture is designed for direct wiring and does not include a power cord. All wiring connections must maintain the IP66 seal to prevent water ingress.

Routine cleaning can be performed with low-pressure spray or damp cloth. The polycarbonate construction resists corrosion and impact, supporting use in food, washdown, or chemical environments. No relamping or ballast maintenance is required over the rated life.

How This Fixture Is Commonly Used

Typical mounting heights range from 8 to 14 feet, with fixtures spaced to achieve uniform coverage based on lumen output and area reflectance. In walk-in coolers or utility rooms, fixtures are often installed in rows or perimeter layouts to minimize shadowing.

In washdown or food processing areas, spacing is determined by required light levels and cleaning access. Higher output settings reduce fixture count but may increase glare in confined spaces. Color temperature selection is based on visual preference or inspection requirements.

Safety, Certifications, and Warranty

This fixture is UL listed and meets IP66 and IK10 ratings for ingress and impact protection. It is suitable for use in locations requiring robust, sealed lighting. The fixture is rebate eligible where applicable.

A 5-year warranty covers manufacturing defects and performance. All safety and certification markings are present on the product label for inspection and compliance verification.

Frequently Asked Questions

Q: What is the maximum mounting height for effective illumination?

A: Effective illumination is typically achieved at mounting heights up to 14 feet. Above this, light levels and uniformity may decrease.

Q: Can this fixture be used in food processing or washdown areas?

A: Yes, the fixture is IP66 and IK10 rated with a polycarbonate housing, supporting use in food processing and washdown environments.

Q: Is dimming available on this model?

A: No, this fixture does not support dimming. Output is fixed at the selected wattage.

Q: How is color temperature and wattage adjusted?

A: Both are set via onboard switches inside the fixture housing during installation or maintenance.

Q: What is the recommended spacing for uniform coverage?

A: Spacing depends on mounting height and output setting. For 10-foot mounting height at 30W, typical spacing is 8 to 12 feet apart.

Application Questions and Clarification

Q: Is this fixture suitable for outdoor covered walkway lighting?

A: Yes, the IP66 rating supports use in covered outdoor walkways where direct exposure to rain or spray may occur.

Q: Can this be installed in stairwells with frequent on/off cycling?

A: Yes, the fixture is rated for frequent switching and is suitable for stairwell applications.

Q: Is this fixture appropriate for use in parking garages?

A: Yes, it is commonly used in parking garages for general and perimeter lighting at low to moderate mounting heights.

Q: Does the fixture require special tools for installation?

A: Standard hand tools are sufficient. Ensure all seals are properly engaged to maintain IP66 protection.