60 / 70 / 80 Watt Adjustable 8 Foot Shop Strip Light | 8500 to 11000 Lumens | 3500K / 4000K / 5000K Adjustable | 100-277V

Product Overview

This 8-foot LED shop strip light is designed for general-purpose linear lighting in commercial and industrial environments. It offers selectable wattage settings of 60, 70, or 80 watts and delivers up to 11,000 lumens, making it suitable for a range of shop and maintenance spaces. The fixture is intended as a direct replacement for traditional fluorescent strip lights, with surface or chain-cable mounting options for flexibility in installation.

Color temperature can be set to 3500K, 4000K, or 5000K to match existing lighting or meet specific visual requirements. The fixture operates on 100-277V input and is UL and DLC Premium listed for performance and safety. Typical mounting heights range from 10 to 16 feet in workshops, garages, and service bays.

Core Performance and Output

This fixture provides selectable output levels of 8,500, 9,500, or 11,000 lumens, with an efficacy of 135 lumens per watt. The 120° beam angle and frosted polycarbonate lens deliver wide, uniform coverage suitable for open shop layouts and work areas. 1-10V dimming is standard for integration with compatible controls.

At maximum output, the fixture is best suited for mounting heights above 10 feet to avoid excessive brightness at eye level. Uniformity may decrease if installed at heights above 16 feet or with wide fixture spacing. The fixture is not intended for high bay or large warehouse applications requiring higher lumen packages.

Adjustability and Control Options

Wattage and color temperature are field-selectable via onboard switches, allowing adjustment during installation or future reconfiguration. This supports changes in task requirements or visual preferences without replacing the fixture.

Standard 1-10V dimming enables integration with occupancy sensors, daylight harvesting, or manual dimming systems. No onboard motion or daylight sensors are included; external controls must be specified separately if required.

Longevity and Reliability

The fixture is rated for 50,000 hours (L70) at typical operating conditions. The galvanized steel housing and polycarbonate lens provide durability for shop and maintenance environments. Operating temperature range is -4°F to 113°F, suitable for most indoor commercial and light industrial spaces.

All components are covered by a 5-year warranty. No routine re-lamping is required. The fixture is not intended for wet locations or environments with corrosive chemicals.

Build Quality and Physical Characteristics

The housing is constructed from galvanized steel with a white finish. The fixture measures 94 inches in length, 2.5 inches in width, and 2.5 inches in height, with a total weight of 8 lbs. The frosted polycarbonate lens diffuses light and minimizes glare.

Surface mounting is standard, with optional chain-cable mounting for suspended installations. No power cord is included; hardwired connection is required. The fixture is designed for continuous row mounting if needed.

Where This Product Fits Best

This LED shop strip light is intended for indoor commercial and industrial environments where linear, uniform lighting is required at moderate mounting heights. It is most commonly installed in:

• workshop lighting
• maintenance shop lighting
• garage lighting
• service bay lighting
• small warehouse lighting
• tool room lighting
• automotive shop lighting
• equipment repair lighting

Suitable for dry, indoor locations with ambient temperatures between -4°F and 113°F. Not rated for wet or hazardous locations. Fixture length and output are optimized for linear runs and open shop layouts.

Installation and Long-Term Use

Surface mounting hardware is included for direct attachment to ceilings or overhead structures. Chain-cable mounting is available for suspended installations where ceiling height or obstructions require drop mounting. The fixture is designed for hardwired connection to 100-277V circuits.

Continuous row mounting is supported for longer runs. Field-selectable wattage and color temperature allow adaptation to changing requirements without fixture replacement. Minimal maintenance is required beyond periodic cleaning of the lens and housing.

How This Fixture Is Commonly Used

Typical mounting heights range from 10 to 16 feet, with fixture spacing determined by desired light levels and task requirements. In workshops and garages, fixtures are often spaced 8 to 12 feet apart for uniform coverage. Service bays and tool rooms may use closer spacing for higher task illumination.

Higher output settings reduce the number of fixtures needed but may increase glare if installed at low mounting heights. Adjusting color temperature can help match existing lighting or improve visual comfort for specific tasks.

Safety, Certifications, and Warranty

This fixture is UL listed and DLC Premium qualified. It meets all relevant safety and performance standards for commercial indoor lighting. The product is covered by a 5-year warranty from the date of installation.

No special safety procedures are required beyond standard electrical installation practices. The fixture is not rated for wet or hazardous locations and should not be installed in environments with exposure to water or corrosive chemicals.

Frequently Asked Questions

Q: What is the recommended mounting height for this 8-foot shop strip light?

A: Recommended mounting height is 10 to 16 feet for optimal light distribution and visual comfort.

Q: Can the fixture be installed in continuous rows?

A: Yes, the fixture supports continuous row mounting for longer runs in workshops or garages.

Q: Is this fixture suitable for wet or outdoor locations?

A: No, this fixture is rated for dry, indoor use only and should not be installed in wet or outdoor environments.

Q: How is wattage and color temperature adjusted?

A: Both wattage and color temperature are set using onboard switches accessible during installation.

Q: What is the expected lifespan of the fixture?

A: The fixture is rated for 50,000 hours (L70) under typical operating conditions.

Q: How should I plan fixture spacing for uniform lighting?

A: Spacing of 8 to 12 feet between fixtures is typical, but actual layout should be based on required light levels and mounting height.

Application Questions and Clarification

Q: Is this fixture appropriate for large warehouse or high bay applications?

A: No, this fixture is intended for shop, garage, and maintenance spaces at moderate mounting heights, not for large warehouse or high bay use.

Q: Can this fixture be used in automotive repair shops?

A: Yes, it is commonly installed in automotive shop lighting and equipment repair areas.

Q: Is the fixture compatible with occupancy sensors?

A: Yes, it supports 1-10V dimming and can be integrated with compatible external occupancy sensors.

Q: What environments are not suitable for this fixture?

A: Environments with moisture, corrosive chemicals, or hazardous conditions are not suitable for this fixture.