30 Foot Round Tapered Steel Light Pole | 7 Inch Base Diameter | Anchor Base | High Wind Zone Rated

Product Overview

This is a 30-foot steel pole designed for mounting lighting fixtures and similar equipment in commercial and industrial environments. The pole is constructed from 7-gauge steel and weighs 300 lbs.

The base diameter is 7 inches, tapering to 3 inches at the tip. The pole is finished with hot dip galvanizing and a bronze powder coat for corrosion resistance and durability.

The anchor base design supports installation on concrete foundations using a bolt circle between 9.8 and 11.4 inches. Bolt projection is 3.15 inches.

This pole is supplied in a bronze color and is intended for use where a 30-foot mounting height is required.

Where This Product Fits Best

This pole is suitable for outdoor or indoor applications where a 30-foot mounting height is needed for lighting or similar equipment. Typical environments include parking lots, sports venues, distribution centers, and large industrial yards.

The hot dip galvanized and powder coated finish supports use in areas exposed to weather, moisture, or corrosive conditions. The steel construction and 7-gauge thickness provide structural strength for demanding environments.

Use this pole where anchor base installation is preferred or required. The bolt circle and projection dimensions must match the foundation design.

Performance and Functional Considerations

The pole's EPA (Effective Projected Area) ratings define the maximum allowable fixture and bracket surface area at various wind speeds. At 70 mph, the EPA is 10.5; at 100 mph, it is 6.5; and at 150 mph, it is 1.2. These values must be considered when selecting fixtures and accessories to ensure structural integrity.

The 7-gauge steel and hot dip galvanized, powder coated finish provide resistance to corrosion and physical impact. The 300 lb weight and 7-inch base diameter support stability at full height.

The anchor base design requires proper foundation engineering and installation to meet site-specific wind load and code requirements.

Installation and Long-Term Use

Installation is by anchor base, requiring a concrete foundation with a bolt circle between 9.8 and 11.4 inches. Bolt projection is 3.15 inches. Proper alignment and torqueing of anchor bolts are critical for long-term stability.

The hot dip galvanized and powder coated finish reduces maintenance requirements by protecting against rust and surface degradation. Periodic inspection of the pole, base, and mounting hardware is recommended to ensure continued performance.

The 30-foot height and 300 lb weight require appropriate lifting equipment and safe handling procedures during installation. Coordination with site engineering is necessary to confirm compatibility with foundation and wind load requirements.

How This Fixture Is Commonly Used

Once installed, this pole provides a stable mounting point for lighting fixtures, cameras, or other equipment at a 30-foot elevation. The height supports wide-area illumination or coverage in large outdoor or indoor spaces.

The bronze finish and corrosion-resistant coating allow the pole to be used in environments exposed to weather, road salts, or industrial chemicals. You can expect the finish to maintain appearance and integrity with routine inspection.

The anchor base design allows for straightforward access to mounting hardware for periodic checks or maintenance. The pole's EPA ratings guide the selection of fixtures and brackets to ensure safe operation under expected wind conditions.

Safety, Certifications, and Warranty

This pole is constructed from 7-gauge steel and finished with hot dip galvanizing and powder coating for durability and corrosion resistance.

EPA ratings are provided for wind speeds from 70 mph to 150 mph. These ratings define the maximum allowable fixture and bracket area for safe use at each wind speed.

LED Lighting Supply provides a 1-year warranty on this pole.

Frequently Asked Questions

What is the total height of the pole?
The pole is 30 feet tall.

What material is the pole made from?
The pole is made from steel with a hot dip galvanized and powder coated finish.

What is the base diameter and tip diameter?
The base diameter is 7 inches and the tip diameter is 3 inches.

What mounting method does this pole use?
This pole uses an anchor base mounting method with a bolt circle between 9.8 and 11.4 inches.

What is the warranty period?
LED Lighting Supply provides a 1-year warranty on this pole.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.