Wet Location LED High Bay Lights

Wet Location LED High Bay Lights

Wet location LED high bay lights are designed for commercial and industrial spaces where fixtures may be exposed to moisture, condensation, dust, or occasional water contact. Our current wet location high bays use compact UFO housings and are available with IP65 or IP66 ratings, depending on the model. Select the IP rating based on the actual water exposure, then confirm the installation method, operating temperature, and corrosion conditions are appropriate for the location.

• IP65: Dust-tight and protected against water jets.
• IP66: Dust-tight and protected against more powerful water jets.

These fixtures are commonly used in damp warehouses, covered loading areas, maintenance facilities, agricultural buildings, unconditioned storage spaces, and other high-ceiling locations where standard dry-location fixtures may not be suitable.

What to Confirm Before Ordering

An IP rating describes resistance to dust and water entering the fixture enclosure. It does not confirm that the high bay is suitable for every corrosive, washdown, high-temperature, or hazardous environment.

• Exposure level: Confirm whether the fixture will encounter humidity, condensation, dripping water, or direct water jets.
• IP rating: Match the IP65 or IP66 rating to the actual installation conditions.
• Mounting and wiring: Use compatible wet-location connectors, conduit entries, and mounting hardware so the completed installation maintains the required protection.
• Temperature: Verify the fixture's listed operating-temperature range for hot, cold, or unconditioned spaces. Review dedicated high-temperature LED lights when elevated heat is a significant operating condition.
• Corrosion exposure: Confirm material and coating suitability for coastal, chemical, fertilizer, or other corrosive environments.

Wet Location Does Not Mean NSF Rated

A wet location or IP-rated high bay should not be confused with an NSF-rated high bay. IP65 and IP66 ratings address protection against dust and water intrusion. NSF certification addresses additional sanitation, cleanability, material, and construction requirements for specific food-processing and food-handling environments.

Do not select a fixture for a food facility based on its IP rating alone. When NSF certification is required, confirm that the exact fixture model carries the appropriate NSF listing for the intended area.

Certifications and Warranty

Confirm that the selected UFO high bay carries a recognized safety certification such as UL, ETL, or CSA and verify DLC or DLC Premium status when utility rebates are expected. IP rating, voltage, dimming, controls, temperature limits, certifications, and warranty coverage vary by model. Most LED Lighting Supply high bays include a 5-year warranty unless otherwise specified.

Installation should be completed by a qualified electrical professional using wiring methods and components suitable for the location and in accordance with the fixture manufacturer's instructions.

Wet Location LED High Bay Lights FAQs

How Do I Choose Between IP65 And IP66 Wet Location LED High Bay Lights?

Choose an IP rating that matches the actual installation conditions: IP65 fixtures are dust-tight and protected against water jets, while IP66 fixtures are dust-tight and protected against more powerful water jets. Confirm whether the fixture will encounter humidity, condensation, dripping water, or direct water jets before ordering.

Where Are Wet Location LED High Bay Lights Commonly Used?

Wet location LED high bay lights are commonly used in damp warehouses, covered loading areas, maintenance facilities, agricultural buildings, unconditioned storage spaces, and other high-ceiling locations where standard dry-location fixtures may not be suitable.

Does An IP65 Or IP66 Rating Make A High Bay Suitable For Every Environment?

No. An IP rating describes resistance to dust and water entering the fixture enclosure, but it does not confirm suitability for every corrosive, washdown, high-temperature, or hazardous environment.

What Should Be Confirmed For Wet Location High Bay Mounting And Wiring?

Compatible wet-location connectors, conduit entries, and mounting hardware should be used so the completed installation maintains the required protection. Installation should be completed by a qualified electrical professional using wiring methods and components suitable for the location and the fixture manufacturer's instructions.

Can An IP-Rated High Bay Be Selected For A Food Facility Based On Its IP Rating?

No. IP65 and IP66 ratings address dust and water intrusion, while NSF certification addresses additional sanitation, cleanability, material, and construction requirements for specific food-processing and food-handling environments. When NSF certification is required, confirm that the exact fixture model carries the appropriate NSF listing for the intended area.

What Model-Specific Details Should Be Verified Before Ordering A Wet Location UFO High Bay?

Verify the selected model's IP rating, voltage, dimming, controls, temperature limits, certifications, and warranty coverage, as these vary by model. Confirm a recognized safety certification such as UL, ETL, or CSA, and verify DLC or DLC Premium status when utility rebates are expected.

What Should Be Considered For Hot, Cold, Or Corrosive Wet Locations?

Verify the fixture's listed operating-temperature range for hot, cold, or unconditioned spaces, and review dedicated high-temperature LED lights when elevated heat is a significant operating condition. For coastal, chemical, fertilizer, or other corrosive environments, confirm material and coating suitability.