600 Watt LED UFO High Bay | 96000 Lumens | 5000K | 100-277V

Product Overview

The 600 Watt LED UFO High Bay is a high-output fixture designed for large-scale, high-ceiling environments requiring significant illumination. This model delivers 96,000 lumens at 5000K, supporting mounting heights typically found in warehouses, manufacturing plants, and distribution centers. The fixture is engineered as a direct replacement for 2000W metal halide systems, providing a substantial reduction in energy consumption and maintenance requirements.

The fixture features a compact UFO form factor with a die-cast aluminum housing and polycarbonate lens. It is suitable for demanding industrial and commercial spaces where durability, high lumen output, and reliable operation are required. Eye-hook mounting is standard, supporting straightforward installation in both new construction and retrofit scenarios.

Core Performance and Output

This fixture delivers 96,000 lumens at 600 watts, achieving an efficacy of 160 lumens per watt. The 60° standard beam angle provides focused, high-intensity illumination for tall, open areas. Optional 10° and 30° optics are available for applications requiring tighter beam control or increased vertical throw.

Performance is optimized for mounting heights of 35 feet and above. At lower heights, output may be excessive and increase glare. Uniformity can be affected at extreme mounting heights without careful layout and beam selection. The fixture operates on 100-277V input and supports 1-10V dimming for integration with lighting controls.

Adjustability and Control Options

The fixture supports 1-10V dimming, allowing for integration with standard dimming systems and occupancy or daylight sensors. This enables end users to adjust light levels based on operational needs or energy management strategies. No onboard controls are included; all control integration is external.

Beam angle can be specified at order with 10°, 30°, or 60° optics. The lens is fixed and not field-adjustable. No tilt or aiming adjustments are provided in the standard eye-hook mounting configuration.

Longevity and Reliability

The fixture is rated for 244,000 hours (L70), supporting long-term deployment in continuous-use environments. The die-cast aluminum housing and polycarbonate lens provide resistance to impact and vibration. The fixture includes 6kV surge protection for added reliability in facilities with power quality concerns.

Operating temperature range is -22°F to 113°F, suitable for most indoor industrial and commercial environments. The fixture is IP66 and IK08 rated, providing protection against dust, water ingress, and moderate mechanical impact.

Build Quality and Physical Characteristics

The fixture measures 17.7 inches in diameter and 10.2 inches in height, with a total weight of 28.4 lbs. The housing is finished in black and constructed from die-cast aluminum for thermal management and durability. The polycarbonate lens is impact-resistant and designed for high-transmittance.

Standard mounting is via eye-hook, supporting chain or cable suspension from structural ceilings or trusses. The fixture includes a 5-foot power cord and an 8-inch dimming cord for straightforward electrical connection. All components are sealed to IP66 standards for dust and water resistance.

Where This Product Fits Best

This fixture is designed for large, high-ceiling indoor environments where high lumen output and robust construction are required. It is commonly deployed in:

• manufacturing facility lighting
• warehouse lighting
• distribution center lighting
• aircraft hangar lighting
• indoor sports facility lighting
• basketball court lighting
• convention center lighting
• event facility lighting

Environments with mounting heights above 35 feet, exposure to dust or moisture, and a need for high-output, low-maintenance lighting benefit from this fixture?s performance and durability.

Installation and Long-Term Use

Installation is via eye-hook suspension, compatible with chain or cable mounting to structural supports. The fixture?s weight and size require secure mounting points and may need two-person handling during installation. Electrical connection is made through the supplied 5-foot cord; dimming integration uses the 8-inch dimming cord.

Routine maintenance is minimal due to the sealed housing and long LED lifespan. Periodic inspection of mounting hardware and electrical connections is recommended in high-vibration or dusty environments. The fixture?s IP66 rating supports use in areas subject to washdown or airborne particulates.

How This Fixture Is Commonly Used

This fixture is typically installed at mounting heights of 35 to 60 feet, spaced to achieve target light levels and uniformity based on the application. In open warehouse or manufacturing layouts, spacing often ranges from 20 to 35 feet on center, depending on racking, ceiling height, and required illumination.

For sports or event facilities, layout may be adjusted to minimize glare and optimize vertical illumination. Higher output allows for reduced fixture count, but may require careful aiming or shielding to control glare in visually sensitive areas.

Safety, Certifications, and Warranty

This fixture is UL listed and DLC Premium qualified. It is rated IP66 for water and dust ingress and IK08 for impact resistance. Surge protection is rated at 6kV. The fixture is covered by a 5-year warranty from the date of installation.

All components are designed for compliance with relevant safety and performance standards for commercial and industrial lighting.

Frequently Asked Questions

Q: What is the recommended mounting height for this 600W UFO high bay?

A: This fixture is best suited for mounting heights of 35 feet and above.

Q: Can this fixture be used in areas exposed to water or dust?

A: Yes, the fixture is IP66 rated for protection against dust and water ingress.

Q: What dimming options are available?

A: The fixture supports 1-10V dimming through an external dimming circuit.

Q: Is this fixture suitable for replacing 2000W metal halide high bays?

A: Yes, it is designed as a direct replacement for 2000W metal halide fixtures in high-ceiling environments.

Q: What is the beam angle and are there other options?

A: The standard beam angle is 60°, with optional 10° and 30° optics available.

Q: How should I plan fixture spacing for uniform coverage?

A: Spacing typically ranges from 20 to 35 feet on center, depending on ceiling height, layout, and required light levels.

Application Questions and Clarification

Q: Is this fixture appropriate for use in aircraft hangars or large event facilities?

A: Yes, the high output and beam control options make it suitable for large, high-ceiling spaces such as hangars and event venues.

Q: Can this fixture be used for basketball court or indoor sports facility lighting?

A: Yes, it is commonly specified for basketball courts and indoor sports facilities with high ceilings.

Q: Is this fixture suitable for natatorium or swimming pool environments?

A: The IP66 rating supports use in humid or wet environments, but confirm compatibility with local codes for natatorium installations.

Q: What are the main considerations for installation in a manufacturing facility?

A: Ensure secure mounting to structural supports, plan for appropriate spacing, and integrate dimming controls if needed for energy management.