GlobalTech LED Retrofit Kit Alternatives: How to Convert to LED Lighting Supply Retrofit Solutions

If you have been searching for GlobalTech LED retrofit kits, you have probably already run into the same issue: no availability or products that have reached the end of life. The good news is you do not need to replace your entire fixture or start over. In most cases, you can convert what you already have using a modern metal halide to LED retrofit kit. Or if the GlobalTech LED retrofit has failed, you can replace it with our retrofit kits.

What a Metal Halide to LED Retrofit Kit Actually Does

A metal halide LED retrofit kit replaces the internal components of your existing fixture. That means the old bulb, ballast, and reflector come out, and in their place you install an LED head and LED driver. You keep the fixture housing. You upgrade everything that matters. This approach gives you:

• Lower energy consumption
• Instant-on performance (no warm-up time)
• Better light quality
• Longer lifespan
• Reduced maintenance costs

In most cases, our kits can be installed in 99 percent of existing metal halide, high-pressure sodium (HPS), or mercury vapor fixtures.

GlobalTech LED to LED Lighting Supply Conversion Guide

Below is a practical conversion reference based on the most common GlobalTech models.

Solstice 2754 – GTSOL2754

27 Watts – 54 Watts. ~ 3000 – 6000 lumens. 45 Watt LED Retrofit Kit – 7425 lumens

Solstice 5498-G2 – GTSOL5498

75 Watts – 120 Watts. ~ 9000 – 12000 lumens 100 Watt LED Retrofit Kit – 15,500 lumens

Solstice M21 – GTSOLM21

25 Watts – 55 Watts. ~ 3000 – 6000 lumens. 45 Watt LED Retrofit Kit – 7425 lumens

Solstice G50 – GTSOL50

25 Watts – 55 Watts. ~ 3000 – 6000 lumens. 45 Watt LED Recessed Retrofit Kit – 7425 lumens or 100 Watt LED Recessed Retrofit Kit – 15000 lumens

Titan 112 – GTSOLTITAN112

125 Watts – 340 Watts. ~ 15,000 – 39,000 lumens. 240 Watt LED Parking Shoebox Retrofit | 39600 Lumens | 1000 Watt Replacement

Best Applications for These Retrofit Kits

These retrofit kits are most commonly used in outdoor fixtures where the housing is still in good condition, but the internal components need to be upgraded. Typical applications include:

• Parking lot shoebox fixtures
• Wall pack lights on buildings
• Flood lights for signage, security, and area lighting
• Pole-mounted area lights
• Outdoor canopy and gas station lighting

They are also used indoors in high bay and recessed applications, but most conversions we see are outdoor, where replacing the full fixture would be more expensive or disruptive. If the fixture is structurally sound and weather-tight, a retrofit kit is usually the fastest and most cost-effective way to upgrade to LED.

Safety and Performance Certifications

All of our metal halide LED retrofit kits are built to meet strict industry standards:

• ETL Listed for electrical and product safety compliance
• DLC Premium Qualified for high efficiency and rebate eligibility

Warranty and Warranty Support

• Minimum 5-year warranty (model dependent)
• USA-based support team
• Fast response for warranty claims

Disclaimer: We are not affiliated with GlobalTech LED. This guide represents compatible replacement options.