80 / 100 / 120 Watt Adjustable LED Wall Pack | 9700 to 15000 Lumens | 3000K / 4000K / 5000K Adjustable | 100-277V

Product Overview

This adjustable LED wall pack is designed for exterior wall mounting on commercial and industrial buildings. It provides selectable wattage and color temperature, allowing adaptation to site-specific requirements. Typical use cases include perimeter lighting and building facade illumination, often as a direct replacement for 250W or 400W metal halide wall packs.

The fixture supports 80, 100, or 120 watt operation and delivers up to 15,000 lumens. It is suitable for mounting heights commonly found on building exteriors, service areas, and loading zones. The housing is die-cast aluminum with a polycarbonate lens, built for long-term outdoor exposure.

Core Performance and Output

This wall pack offers three selectable output levels: 9700, 12,500, or 15,000 lumens, with a maximum efficacy of 125 lumens per watt. The 90° beam angle provides forward-throw distribution for uniform coverage along building perimeters and pathways. Color temperature can be set to 3000K, 4000K, or 5000K as needed for site conditions or visual preference.

Power factor exceeds 0.90 and THD remains below 20%, supporting stable operation on 100-277V circuits. Output at 120W is suitable for mounting heights up to approximately 20 feet; at lower heights, the highest setting may produce excessive brightness or glare. Uniformity may decrease if fixtures are spaced too far apart at maximum mounting height.

Adjustability and Control Options

Wattage and color temperature are field-adjustable via onboard switches, allowing tuning during installation or future maintenance. This supports changes in site requirements without fixture replacement. The fixture includes an integrated photocell option for dusk-to-dawn operation, reducing manual control needs.

No dimming function is provided. The fixture is intended for on/off or photocell-controlled operation only. Adjustability features are accessible without removing the fixture from the wall.

Longevity and Reliability

The fixture is rated for 50,000 hours (L70) at typical operating temperatures. The die-cast aluminum housing and polycarbonate lens provide impact resistance and weather protection. All components are designed for continuous outdoor use, including exposure to rain, dust, and temperature fluctuations.

Operating temperature range is -40°F to 122°F. The fixture is IP65 rated for protection against water jets and dust ingress. No routine internal maintenance is required beyond periodic lens cleaning and inspection of seals.

Build Quality and Physical Characteristics

The fixture measures 13 3/8 x 9 7/16 x 4 1/2 inches and weighs 7.5 lbs. The housing is bronze-finished die-cast aluminum with a polycarbonate lens. All hardware is corrosion-resistant for exterior use.

Wall mounting is standard. The fixture is designed for direct attachment to flat exterior surfaces using standard electrical boxes or surface conduit. All wiring and adjustment points are accessible from the rear or side of the housing.

Where This Product Fits Best

This wall pack is intended for exterior building applications requiring reliable, adjustable-output lighting. It is commonly installed on commercial, industrial, and multifamily properties for security, access, and perimeter illumination. The fixture is suitable for both retrofit and new construction projects where wall-mounted lighting is required.

• security lighting
• building facade lighting
• building exterior lighting
• commercial exterior wall lighting
• perimeter lighting
• entry lighting
• service area lighting
• loading area lighting

IP65 rating and wide operating temperature range support use in exposed outdoor environments. The fixture is not intended for canopy, ceiling, or pole mounting.

Installation and Long-Term Use

Wall mounting is direct and compatible with standard junction boxes or surface conduit. The fixture?s weight and size allow for single-person installation in most cases. All adjustments for wattage and color temperature are made before finalizing the mounting.

Periodic inspection of seals and cleaning of the lens are recommended to maintain output and weather resistance. The fixture is designed for minimal maintenance over its rated life. Integrated photocell reduces manual switching requirements in dusk-to-dawn applications.

How This Fixture Is Commonly Used

Typical mounting heights range from 8 to 20 feet, depending on output setting and site requirements. Fixtures are spaced to provide overlapping coverage along building perimeters, entries, and service areas. Spacing varies based on wattage selection and desired light levels, with higher output settings allowing wider spacing but potentially increasing glare near pedestrian areas.

Common deployment includes continuous runs along exterior walls, targeted placement at entries and loading docks, and coverage of service alleys. Adjustment features allow tuning after installation to match site conditions or address changes in use patterns.

Safety, Certifications, and Warranty

This fixture is UL listed and IP65 rated. It is suitable for wet locations and meets requirements for exterior wall-mounted lighting on commercial and industrial buildings. The product is rebate eligible where applicable.

Warranty coverage is 5 years from date of installation. All components are rated for outdoor use and long-term reliability in exposed environments.

Frequently Asked Questions

Q: What is the recommended mounting height for this wall pack?

A: The fixture is suitable for mounting heights between 8 and 20 feet, depending on wattage setting and required light levels.

Q: Can the wattage and color temperature be changed after installation?

A: Yes, both wattage and color temperature are field-adjustable using onboard switches accessible during maintenance.

Q: Is this fixture compatible with dimming controls?

A: No, this wall pack does not support dimming. It is designed for on/off or photocell operation only.

Q: Does the fixture include a photocell for automatic dusk-to-dawn operation?

A: Yes, an integrated photocell is included for automatic dusk-to-dawn control.

Q: What is the expected lifespan of the fixture?

A: The rated life is 50,000 hours (L70) under typical operating conditions.

Q: How should fixtures be spaced for uniform coverage?

A: Spacing depends on mounting height and wattage setting; higher output allows wider spacing, but site-specific layout is recommended for best results.

Application Questions and Clarification

Q: Is this wall pack suitable for use in loading area lighting?

A: Yes, the fixture is commonly used for loading area lighting on building exteriors.

Q: Can this fixture be used for multifamily exterior lighting?

A: Yes, it is suitable for multifamily exterior wall applications where perimeter and entry lighting are required.

Q: Is this fixture appropriate for alley lighting?

A: Yes, it is frequently installed for alley lighting along building exteriors.

Q: Can this wall pack be installed on canopy ceilings or poles?

A: No, this fixture is designed for wall mounting only and is not intended for canopy or pole installation.