80 Watt LED Wall Pack | 11065 Lumens | 5000K | 100-277V | Built-In Photocell

Product Overview

This 80 Watt LED Wall Pack is designed for exterior wall mounting on commercial and industrial buildings. It delivers 11,065 lumens at 5000K, providing high-output illumination for perimeter and security applications. The fixture includes a built-in photocell for dusk-to-dawn operation and is suitable for direct replacement of 250W metal halide wall packs.

The housing is die-cast aluminum with a polycarbonate lens, rated for wet locations (IP65). Typical installations include building exteriors, service areas, and loading zones where reliable, uniform wall-mounted lighting is required.

Core Performance and Output

This wall pack outputs 11,065 lumens at 80 watts, achieving 138 lumens per watt. The 120° beam angle provides wide coverage for exterior walls and adjacent areas. Color temperature is 5000K, with a CRI above 75 for clear visibility. Power factor exceeds 0.90 and THD is below 20% for stable electrical performance.

At mounting heights between 8 and 18 feet, the output is suitable for most exterior wall and perimeter lighting needs. Excessive output may cause glare at lower mounting heights or in confined entryways. Uniformity may decrease if spacing exceeds typical wall pack intervals.

Adjustability and Control Options

This fixture includes a built-in photocell for automatic dusk-to-dawn operation. There are no onboard dimming or motion sensor options. The beam distribution is fixed at 120°, with no field-adjustable optics or aiming features.

Control integration is limited to the photocell; external controls would require additional hardware not included with the fixture.

Longevity and Reliability

The rated lifespan is 50,000 hours (L70). The fixture is designed for continuous outdoor operation in a wide temperature range from -40°F to 122°F. The die-cast aluminum housing and polycarbonate lens resist impact and weather exposure.

Routine maintenance is minimal. The sealed construction and IP65 rating protect internal components from dust and water ingress.

Build Quality and Physical Characteristics

The fixture measures 13.1 x 9.5 x 7.5 inches and weighs 8 lbs. The housing is bronze-finished die-cast aluminum with a polycarbonate lens. All hardware is corrosion-resistant for exterior use.

Wall mounting is standard. The fixture is designed for direct attachment to flat exterior surfaces. The sealed enclosure supports operation in wet locations and resists wind-driven rain and debris.

Where This Product Fits Best

This wall pack is intended for exterior wall mounting on commercial and industrial buildings. It is suitable for security, perimeter, and entry lighting where high-output, wide-distribution illumination is required. The fixture is commonly used on building facades, service areas, and loading zones.

• security lighting
• building facade lighting
• building exterior lighting
• commercial exterior wall lighting
• perimeter lighting
• entry lighting
• service area lighting
• loading area lighting

IP65 rating supports use in wet locations and exposed outdoor environments. The fixture is not intended for interior use or locations requiring specialized hazardous or marine ratings.

Installation and Long-Term Use

Wall mounting is direct to flat exterior surfaces using standard hardware. The fixture operates on 100-277V input and is compatible with most commercial electrical systems. The built-in photocell simplifies dusk-to-dawn operation without additional controls.

Long-term maintenance is limited to periodic cleaning of the lens and inspection of mounting hardware. The sealed design minimizes water and dust ingress. Replacement is straightforward due to standard form factor and mounting pattern.

How This Fixture Is Commonly Used

Typical mounting heights range from 8 to 18 feet, depending on the area to be illuminated and required light levels. Fixtures are spaced to provide overlapping coverage along building exteriors, with closer spacing at entry points or high-traffic areas.

Higher output allows for wider spacing, but may increase glare if installed at low heights or near reflective surfaces. Layouts are often determined by building geometry and security requirements.

Safety, Certifications, and Warranty

This fixture is UL listed and IP65 rated. It is eligible for utility rebates where applicable. The operating temperature range is -40°F to 122°F. Warranty coverage is 5 years from date of installation.

All components are rated for exterior use and meet relevant safety and performance standards for commercial wall-mounted lighting.

Frequently Asked Questions

Q: What is the recommended mounting height for this wall pack?

A: Typical mounting heights are 8 to 18 feet, depending on the area and required light levels.

Q: Does this fixture support dimming or motion sensors?

A: No, this fixture does not support dimming or motion sensors. It includes a built-in photocell for dusk-to-dawn operation.

Q: Is the fixture suitable for wet locations?

A: Yes, the fixture is IP65 rated for wet locations and outdoor exposure.

Q: What is the expected lifespan of the LEDs?

A: The rated lifespan is 50,000 hours (L70).

Q: How should fixtures be spaced for uniform coverage?

A: Spacing depends on mounting height and required light levels, but typical wall pack layouts use 2 to 3 times the mounting height as a starting point.

Application Questions and Clarification

Q: Can this wall pack be used for entry lighting on multifamily buildings?

A: Yes, it is suitable for entry lighting and multifamily exterior lighting where wall mounting is possible.

Q: Is this fixture appropriate for perimeter lighting around commercial warehouses?

A: Yes, it is commonly used for perimeter and security lighting on commercial and industrial buildings.

Q: Does the fixture require a separate photocell or timer?

A: No, the fixture includes a built-in photocell for automatic dusk-to-dawn operation.

Q: Is this wall pack compatible with 120V and 277V electrical systems?

A: Yes, it operates on 100-277V input and is compatible with both 120V and 277V systems.