80 Watt Solar Area Light | 16000 Lumens | 4000K | High Performance | 5 Year Warranty

Product Overview

This 80 Watt Solar Area Light is designed for off-grid exterior lighting in commercial and municipal environments. It integrates a monocrystalline solar panel, lithium battery, and LED array into a single unit for autonomous operation. Typical use cases include replacing 400W metal halide fixtures on poles for street, pathway, or parking lot lighting where grid power is unavailable or cost-prohibitive.

The fixture operates at 4000K with a Type 3 beam distribution, supporting area coverage for roadways, walkways, and open lots. Slip fitter mounting is standard, allowing direct installation onto round poles commonly found in outdoor area lighting projects.

Core Performance and Output

This solar area light delivers 16,000 lumens at 80 watts, achieving 200 lumens per watt system efficacy. The Type 3 polycarbonate optics provide lateral distribution suitable for roadways, parking lots, and wide pathways. Output is consistent with typical pole heights between 15 and 25 feet, matching the performance of legacy 400W metal halide fixtures in similar applications.

Integrated motion sensing enables adaptive output for energy conservation and extended battery life. Excessive output may occur if installed at mounting heights below 12 feet, and uniformity may decrease at pole spacings above 4 times mounting height.

Adjustability and Control Options

The fixture includes a built-in motion sensor for occupancy-based dimming and battery management. The sensor automatically increases output when activity is detected and reduces output during periods of inactivity to maximize operational hours.

No external dimming or networked control is provided. All control logic is self-contained within the fixture. The system is designed for autonomous dusk-to-dawn operation with adaptive response to motion events.

Longevity and Reliability

Rated for 100,000 hours (L70), the LED array and driver are engineered for long-term operation in outdoor environments. The monocrystalline solar panel and lithium battery are selected for multi-year service life under typical cycling conditions.

IP65 enclosure protects against dust and water ingress. The fixture is suitable for year-round exposure in most climates, with no routine maintenance required beyond periodic cleaning of the solar panel surface.

Build Quality and Physical Characteristics

The housing is constructed from aluminum alloy for corrosion resistance and structural integrity. Polycarbonate optics provide impact resistance and UV stability. The integrated solar panel is factory-mounted and sealed.

Fixture dimensions are 55 inches long, 16.61 inches wide, and 10 inches high, with a total weight of 48 lbs. Slip fitter mounting is compatible with standard round poles. EPA rating is 1.8, supporting secure installation in typical wind load zones.

Where This Product Fits Best

This solar area light is designed for exterior environments where grid power is unavailable or unreliable. It is commonly deployed in municipal, campus, and remote site lighting projects requiring autonomous operation and minimal infrastructure.

• street lighting
• pathway lighting
• remote site lighting
• parking lot lighting
• park lighting
• trail lighting
• campus lighting
• municipal lighting

IP65 rating and sealed construction allow use in wet locations and outdoor environments with exposure to rain, dust, and temperature variation. The fixture is not intended for indoor use or locations with persistent shade that limits solar charging.

Installation and Long-Term Use

Slip fitter mounting supports direct installation onto round poles with standard tenon sizes. The fixture is typically installed at heights between 15 and 25 feet, depending on area coverage and uniformity requirements. All components are integrated, eliminating the need for external wiring or trenching.

Routine maintenance is limited to cleaning the solar panel to maintain charging efficiency. Battery replacement may be required after several years, depending on usage patterns and environmental conditions. The fixture is designed for minimal service intervention over its rated life.

How This Fixture Is Commonly Used

Common deployment includes single or multi-fixture layouts along roadways, parking lots, or pathways. Spacing is typically 3 to 4 times the mounting height for uniform coverage, with adjustments based on site geometry and required light levels.

Mounting heights below 12 feet may result in excessive brightness and reduced distribution. Higher output allows for wider spacing, but may increase glare if not properly shielded or oriented. Motion sensor operation reduces energy consumption during periods of low activity.

Safety, Certifications, and Warranty

This fixture is IP65 rated for wet locations. The housing and optics are impact resistant and suitable for outdoor use. All electrical components are isolated from user contact during normal operation.

Warranty coverage is 5 years for the complete fixture, including LED array, driver, solar panel, and battery. No additional certifications are specified for this model.

Frequently Asked Questions

Q: What is the recommended mounting height for this solar area light?

A: Typical mounting height is 15 to 25 feet for balanced coverage and uniformity.

Q: How does the motion sensor affect battery life?

A: The motion sensor reduces output during inactivity, extending battery life and supporting longer operation during low sunlight periods.

Q: Can this fixture be installed on existing poles?

A: Yes, the slip fitter mount is compatible with standard round poles and tenons used in area and street lighting.

Q: Is any external wiring required for installation?

A: No, all components are integrated. No external wiring or trenching is needed.

Q: How should fixtures be spaced for uniform lighting?

A: Spacing is typically 3 to 4 times the mounting height, adjusted for site layout and required light levels.

Application Questions and Clarification

Q: Is this fixture suitable for shaded locations?

A: No, consistent solar charging requires direct sunlight. Persistent shade will reduce performance.

Q: Can this be used for municipal pathway lighting projects?

A: Yes, this fixture is commonly used for pathway and municipal lighting where grid power is not available.

Q: What is the expected maintenance for the solar panel?

A: Periodic cleaning of the solar panel surface is recommended to maintain charging efficiency.

Q: Does the fixture operate in all weather conditions?

A: The IP65 rating allows operation in rain and dust, but extended periods of low sunlight may reduce nightly run time.