Detention Grade LED Exit Sign | 100-277V | IK10 | USA Made | Built to Spec
This detention-grade LED exit sign suits correctional and detention facilities needing a durable, tamper-resistant egress fixture. Its 16-gauge powder-coated cold roll steel housing, IK10 impact rating, and T25 Torx center-pin reject fasteners support demanding environments. The 100-277V input simplifies use across common electrical systems, while the emergency backup battery supports exit marking during power loss. Surface or wall mounting and clear polycarbonate optics provide practical installation flexibility.
Dwayne Kula | President, CTO and Founder
Product Specifications
Key Features
| Brand | LED Lighting Supply |
| Voltage | 100V-277V |
| Mounting | Surface or Wall |
| Fixture Color | White |
Durable Construction
| Fasteners | T25 Torx with Center Pin Reject |
| IK Rating | IK10 |
| Certifications | ETL | Rebate Eligible |
| Warranty | 5 years |
Measurements
| Dimensions (in) | 16 3/16 x 12 7/8 x 2 13/16 |
Features/Accessories
- Emergency Backup Battery
Ordering information
Series
Housing Material
Legend Color
Voltage
Options
Product Overview
This detention grade LED exit sign provides illuminated exit marking for secure facilities where impact resistance and tamper-resistant construction are required. It operates on 100-277V input and includes an emergency backup battery.
The fixture uses a white powder-coated 16-gauge steel housing, clear polycarbonate optics, and T25 Torx fasteners with center pin reject. Its IK10 rating supports installation in detention facility lighting and other secure area lighting locations.
Core Performance and Output
This exit sign operates from 100V to 277V. The emergency backup battery maintains exit-sign operation during a loss of normal power.
Clear polycarbonate optics provide the illuminated exit indication. Output placement must remain visible from the intended egress route; fixture location and mounting height affect visibility.
Adjustability and Control Options
This fixture is configured for surface or wall mounting. It does not include adjustable optics, field-selectable output, or control options in the supplied product data.
The 100-277V input supports use on common commercial and industrial voltage systems. Verify the available voltage and required mounting surface before installation.
Longevity and Reliability
The steel housing, polycarbonate optics, and tamper-resistant fasteners are intended for demanding secure installations. The IK10 rating addresses impact resistance.
The emergency backup battery is part of the fixture assembly. Battery condition should be included in routine life-safety maintenance procedures.
Build Quality and Physical Characteristics
The housing is powder-coated 16-gauge steel with a white finish. T25 Torx fasteners with center pin reject help limit unauthorized access to the fixture.
The fixture measures 16 3/16 inches by 12 7/8 inches by 2 13/16 inches. Clear polycarbonate optics protect the illuminated exit sign components.
Where This Product Fits Best
This exit sign fits secure interior locations that require emergency exit marking and vandal-resistant construction. It is intended for detention-grade installations rather than general-purpose exit sign locations.
- detention facility lighting
- correctional facility lighting
- secure area lighting
- vandal resistant lighting
- holding cell lighting
- secure corridor lighting
- tamper resistant lighting
The IK10 rating, steel housing, polycarbonate optics, and center pin reject fasteners suit locations where physical abuse or unauthorized fixture access is a concern.
Installation and Long-Term Use
Install the fixture using the specified surface or wall mounting method. Confirm that the mounting surface supports the fixture and that the 100-277V supply matches the available branch circuit voltage.
Access to the emergency backup battery and fasteners should be considered during maintenance planning. The fixture carries a 5-year warranty.
How This Fixture Is Commonly Used
In detention facility lighting, correctional facility lighting, and secure area lighting layouts, the sign is mounted where exit marking is required. Mounting height is determined by the required exit-marking location and visibility needs.
Secure corridor lighting layouts typically place fixtures along the egress path and at required exit points. Layout requirements vary by facility configuration, exit locations, and required sign visibility.
Safety, Certifications, and Warranty
This fixture is ETL listed. It is rebate eligible.
The fixture is IK10 rated and includes an emergency backup battery. It carries a 5-year warranty.
Frequently Asked Questions
Q: What input voltage does this detention grade LED exit sign accept?
A: The fixture operates on 100V-277V input.
Q: Does this exit sign include emergency backup?
A: Yes. An emergency backup battery is included.
Q: What mounting methods are available?
A: The fixture supports surface mounting or wall mounting.
Q: What impact rating does the fixture have?
A: The fixture is IK10 rated.
Q: What type of fasteners are used?
A: The fixture uses T25 Torx fasteners with center pin reject.
Application Questions and Clarification
Q: Is this fixture appropriate for vandal resistant lighting?
A: The fixture is listed for vandal resistant lighting and includes an IK10 rating, 16-gauge steel housing, polycarbonate optics, and T25 Torx center pin reject fasteners.
Q: Can this fixture be used for holding cell lighting?
A: Holding cell lighting is a listed secondary application. Final fixture placement must provide the required exit marking for the location.
Q: What should be confirmed before installing this sign in secure corridor lighting?
A: Confirm the available 100-277V input, surface or wall mounting condition, required exit-marking location, and fixture visibility.
Web ID: 2635
