35 Watt Detention Grade LED Canopy Light | 5000 Lumens | 4000K | 100-277V

Product Overview

This 35 watt detention grade LED canopy light delivers 5000 lumens at 4000K color temperature, replacing 150 watt metal halide fixtures. The fixture is built in the USA using 20-gauge cold roll steel housing with an injection molded polycarbonate drop lens, designed specifically for high-impact, high-security environments.

The fixture operates on 100-277V input at 50/60Hz with a power factor greater than 0.9. It supports 0-10V dimming and provides 143 lumens per watt efficiency with 80+ CRI. Rated lifespan is 100,000 hours at L70.

Overall dimensions are 14 inches by 14 inches by 3.92 inches. The fixture surface mounts and uses torx screws for fastening. Available colors are white, black, bronze, and silver.

Where This Product Fits Best

This fixture is purpose-built for detention and correctional facilities, behavioral health units, and other secured environments where impact resistance and tamper deterrence are required. The cold roll steel housing and polycarbonate lens construction address the durability demands of these applications.

The torx screw fasteners reduce the risk of unauthorized access compared to standard Phillips or slotted hardware. Surface mounting allows installation on concrete ceilings and other structural surfaces common in secure facilities.

The 100-277V input range accommodates both standard commercial voltage and institutional electrical systems without requiring external transformers or voltage-specific models.

Performance and Functional Considerations

At 35 watts producing 5000 lumens, this fixture replaces 150 watt metal halide while reducing energy consumption. The 4000K neutral white color temperature provides clear visibility without the harshness of higher color temperatures.

The 80+ CRI supports accurate color rendering for surveillance camera systems and visual monitoring. The 100,000-hour L70 rated lifespan reduces relamping frequency, which is particularly relevant in secured spaces where maintenance access may require coordination with security protocols.

The 0-10V dimming capability allows integration with building automation systems or manual dimming controls where reduced output is appropriate during low-activity periods.

Installation and Long-Term Use

The fixture surface mounts directly to ceilings or canopy structures. Torx fasteners are standard, requiring torx drivers for installation and any future service access. This fastener type is intentional for detention environments where tool control is a consideration.

The 100-277V universal input simplifies electrical connections across facility voltage configurations. The injection molded polycarbonate lens is designed to withstand impact while maintaining light transmission over the fixture''s service life.

At 14 inches square with a depth under 4 inches, the fixture profile is compact for surface-mounted applications. The 20-gauge steel housing provides structural integrity against tampering and physical abuse.

How This Fixture Is Commonly Used

Facility operators typically install this fixture in common areas, corridors, intake processing areas, and exterior covered walkways within secured campuses. The neutral white output and high CRI support both general illumination and camera-based monitoring requirements.

Where 0-10V dimming infrastructure exists, the fixture can be adjusted to lower output levels during nighttime hours while maintaining baseline illumination for security purposes. In facilities without dimming controls, the fixture operates at full output on standard switched circuits.

The four color options allow matching to existing architectural finishes or facility color standards. White is the standard color, with black, bronze, and silver available for different aesthetic requirements.

Safety, Certifications, and Warranty

This fixture is ETL listed and rebate eligible. It is manufactured in the USA.

LED Lighting Supply provides a 5-year warranty on this product.

Frequently Asked Questions

What voltage does this fixture require?
The fixture operates on 100-277V input at 50/60Hz, covering standard commercial and institutional voltage ranges.

What does this fixture replace?
This 35 watt LED fixture replaces 150 watt metal halide canopy lights.

Is this fixture dimmable?
Yes, the fixture supports 0-10V dimming when connected to compatible dimming controls.

Is this fixture rebate eligible?
Yes, this fixture is rebate eligible. Check with your local utility for specific program requirements.

What colors are available?
The fixture is available in white, black, bronze, and silver.

What is the warranty coverage?
LED Lighting Supply provides a 5-year warranty on this fixture.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.