Detention Grade LED Wraparound Light | Up to 25000 Lumens | 100-277V | IK10 | USA Made | Built to Spec
This detention-grade LED wraparound is well suited to correctional facilities and institutional corridors needing durable, controllable lighting. Tamper-resistant TORX screws, wet-location rating, and operation from -22F to 122F support demanding environments. Available from 1,000 to 25,000 lumens with selectable color temperatures, 0-10V dimming, and surface or wall mounting, it can be tailored to varied corridor and facility lighting needs.
Dwayne Kula | President, CTO and Founder
Product Specifications
Key Features
| Brand | LED Lighting Supply |
| Lumens | 1000 to 25000 |
| Voltage | 100V-277V |
| Color Temperature | 2700K or 3000K or 3500K or 4000K or 5000K |
| CRI | 80+ |
| Dimming | 0-10V |
| Optics | Polycarbonate Lens |
| Lifespan | 100,000 (L70) hours |
| Mounting | Surface or Wall |
| Fixture Color | White |
| Frequency (Hz) | 50/60 |
| Power Factor | >0.9 |
Durable Construction
| Fasteners | Tamper-Resistant TORX Screws |
| IP Rating | Wet Location Rated |
| Operating Temperature | -22°F to 122°F |
| Certifications | ETL | Rebate Eligible |
| Warranty | 5 years |
Ordering information
Series
Size
CCT
Output
Housing Material
Lens
Voltage
Driver
Options
Product Overview
This detention grade LED wraparound light is a surface- or wall-mounted fixture for secure lighting installations. It provides 1,000 to 25,000 lumens with a polycarbonate lens, tamper-resistant TORX screws, and IK10 impact resistance.
The fixture is configured for detention facility lighting, correctional facility lighting, and other controlled interior areas where fixture durability and tamper resistance are required. It is made in the USA and built to specification.
Core Performance and Output
Output ranges from 1,000 to 25,000 lumens. Available color temperatures include 2700K, 3000K, 3500K, 4000K, and 5000K, with 80+ CRI.
The fixture operates on 100-277V, 50/60 Hz power and has a power factor greater than 0.9. Lower-output configurations are more appropriate where high output would create excessive brightness, while higher-output configurations require layout review to maintain uniform coverage.
Adjustability and Control Options
This fixture supports 0-10V dimming. Dimming control allows output to be adjusted where operating conditions require lower light levels.
Color temperature is specified from 2700K through 5000K. The selected color temperature and lumen package should remain consistent within the installed lighting area.
Longevity and Reliability
The rated lifespan is 100,000 hours at L70. This rating supports long operating intervals before lumen output reaches 70 percent of its initial level.
The fixture operates in ambient temperatures from -22 degrees F to 122 degrees F. Its wet location rating supports installations exposed to moisture.
Build Quality and Physical Characteristics
The white wraparound housing uses a polycarbonate lens and tamper-resistant TORX screws. The lens and fastening system address impact exposure and unauthorized fixture access.
IK10 impact resistance is provided for demanding secure-area conditions. Mounting options include surface mounting and wall mounting.
Where This Product Fits Best
This fixture fits secure institutional lighting areas where a detention-grade wraparound form factor, tamper-resistant hardware, and impact resistance are required.
- correctional facility lighting
- detention facility lighting
- secure corridor lighting
- holding cell lighting
- psychiatric facility lighting
- vandal resistant lighting
Wet location construction, IK10 impact resistance, and tamper-resistant TORX screws support controlled environments subject to moisture, impact exposure, or tampering concerns.
Installation and Long-Term Use
Install the fixture using the specified surface or wall mounting method. Verify the mounting surface, electrical supply voltage, and dimming wiring before final installation.
Access to tamper-resistant TORX screws should be maintained for service work. Long-term maintenance should include inspection of the lens, fasteners, mounting condition, and dimming connections.
How This Fixture Is Commonly Used
In detention facility lighting and correctional facility lighting layouts, fixtures are installed along surfaces or walls based on the room configuration and required illumination pattern. Mounting height must be determined from the physical layout and project lighting requirements.
Secure corridor lighting layouts commonly use repeated fixture placement along the travel path to maintain consistent illumination. Spacing varies with the selected lumen package, mounting location, and target light levels.
Safety, Certifications, and Warranty
This fixture is ETL listed. It is wet location rated and IK10 impact rated.
The fixture is rebate eligible and carries a 5-year warranty. Tamper-resistant TORX screws are included as part of the fixture construction.
Frequently Asked Questions
Q: What lumen outputs are available?
A: Available output ranges from 1,000 to 25,000 lumens.
Q: What voltage does this fixture use?
A: The fixture operates on 100-277V, 50/60 Hz power.
Q: Can this detention grade wraparound light be dimmed?
A: Yes. The fixture supports 0-10V dimming.
Q: What mounting options are available?
A: The fixture is available for surface mounting or wall mounting.
Q: What information affects fixture placement in secure corridor lighting?
A: Mounting height, selected lumen output, target light levels, and layout requirements affect fixture placement. A specific spacing value is not established by the supplied product data.
Application Questions and Clarification
Q: Is this fixture appropriate for holding cell lighting?
A: Holding cell lighting is a listed secondary application. The fixture includes IK10 impact resistance, a polycarbonate lens, and tamper-resistant TORX screws.
Q: Can this fixture be used for psychiatric facility lighting?
A: Psychiatric facility lighting is a listed secondary application. Final fixture configuration depends on the required lumen output, color temperature, mounting method, and control requirements.
Q: What should be confirmed before selecting a lumen package for correctional facility lighting?
A: Confirm the mounting location, target light levels, layout requirements, available voltage, and whether 0-10V dimming is required.
Web ID: 2638
