Skip to content

Nema Beam Spread: Understanding Lighting Distribution

Understanding NEMA Beam-Spread Classifications

NEMA (National Electrical Manufacturers Association) is an ANSI-accredited standards developer for electrical equipment in North America. In lighting, NEMA beam-spread classifications provide a common way to describe the approximate angular spread of a fixture’s beam.

NEMA beam-spread categories can help narrow fixture and optic choices, but they do not by themselves establish illuminance, uniformity, glare control, energy performance, or code compliance. Those results depend on the fixture’s complete photometric distribution, lumen output, mounting height, spacing, aiming, and site conditions.

NEMA Beam-Spread Classifications

NEMA beam-spread classifications range from Type 1 (very narrow) to Type 7 (very wide). They describe beam-spread angle ranges rather than a required projection distance or a specific application.

  • Very Narrow (NEMA Type 1)
    • Beam Spread: 10° to 18°
    • Typical Uses: Long-throw or focused accent applications where the fixture photometry supports the required distance and light levels
  • Narrow (NEMA Type 2)
    • Beam Spread: 18° to 29°
    • Typical Uses: Focused perimeter, security, or long-throw lighting applications
  • Medium Narrow (NEMA Type 3)
  • Medium (NEMA Type 4)
    • Beam Spread: 46° to 70°
    • Typical Uses: General area lighting where moderate coverage is needed
  • Medium Wide (NEMA Type 5)
    • Beam Spread: 70° to 100°
    • Typical Uses: Broad area coverage at suitable mounting heights
  • Wide (NEMA Type 6)
    • Beam Spread: 100° to 130°
    • Typical Uses: Wide-coverage applications, including selected LED flood lights and wall-washing designs
  • Very Wide (NEMA Type 7)
    • Beam Spread: 130°+
    • Typical Uses: Close-range and broad-coverage applications where glare and light spill are evaluated

Note: A NEMA beam-spread number does not predict how far a fixture will effectively project light. Effective coverage depends on fixture output, optics, aiming, mounting height, target illuminance, and the complete photometric distribution. Consult the fixture’s IES photometric data for design decisions.

IES Roadway and Area Light Distribution Types

Roadway and area luminaires are commonly described using IES distribution Types I, II, III, IV, V, and VS. These classifications describe the horizontal shape and direction of light distribution; they are distinct from NEMA beam-spread classifications.

IES roadway and area light distribution patterns showing Types I through V and VS
IES roadway and area light distribution patterns for outdoor lighting applications

Type I Distribution

  • Pattern: Narrow, generally two-way distribution with an approximately 15° total lateral width
  • Applications: Sidewalks, paths, walkways, and narrow roadways
  • Fixture Placement: Often center-mounted over a narrow path or roadway
  • Design Consideration: Mounting height, spacing, and illuminance targets should be verified with fixture-specific photometric calculations

Type II Distribution

  • Pattern: Narrow distribution with an approximate 25° lateral width
  • Applications: Narrow roadways, wider walkways, ramps, and entrance roads
  • Fixture Placement: Typically at or near the side of a roadway or path
  • Design Consideration: Often used where the lighted width is relatively narrow compared with mounting height; verify the layout using IES data

Type III Distribution

  • Pattern: Wider forward-throw distribution with an approximate 40° lateral width
  • Applications: Roadways, parking areas, and general area lighting
  • Fixture Placement: Typically side-mounted
  • Design Consideration: Can provide broader coverage than Type II, but spacing and uniformity depend on the specific luminaire photometry

Type IV Distribution

  • Pattern: Broad, asymmetric forward-throw distribution with an approximate 60° lateral width
  • Applications: Perimeter areas, parking lots, building-side locations, and wall-mounted applications
  • Fixture Placement: Commonly mounted at the edge of an area, where light is directed outward
  • Design Consideration: Review property-line spill light, glare, and aiming as part of the photometric design

Type V Distribution

  • Pattern: Circular distribution with substantially equal light output in all horizontal directions
  • Applications: Intersections, center medians, and large parking areas
  • Fixture Placement: Typically center-mounted
  • Characteristics: Distributes light in all horizontal directions, subject to the fixture’s specific photometric pattern

Type VS Distribution

  • Pattern: Square distribution
  • Applications: Intersections, center medians, parking areas, and defined square or rectangular coverage areas
  • Fixture Placement: Typically center-mounted
  • Characteristics: Provides a square-shaped distribution with more defined edges than a Type V pattern

Selecting the Right Distribution

Choosing an appropriate beam spread and distribution depends on several factors:

  • Mounting Height: Mounting height affects fixture spacing, coverage, glare, and delivered illuminance. Select optics and mounting height together rather than relying on a universal rule.
  • Coverage Area: Narrow beams can concentrate light on distant or smaller targets, while wider beams can cover broader nearby areas.
  • Application Requirements: Security, parking, pedestrian, roadway, and general area lighting can have different illuminance, uniformity, glare, and spill-light objectives.
  • Spacing and Layout: Fixture spacing, pole locations, aiming, and overlap affect light levels and uniformity.
  • Photometric Data: Use the selected fixture’s IES file to evaluate delivered foot-candles or lux, uniformity, glare, and light trespass for the actual site.

For optimal results, lighting design should be based on fixture-specific photometric analysis and applicable project requirements. LED Lighting Supply can help review published fixture specifications and prepare photometric lighting plans, but the project authority, designer, electrical professional, or AHJ determines final design and code compliance requirements.

Professional Installation Note: Electrical installations should be performed by qualified electricians in accordance with applicable electrical codes and local requirements. Proper permits and inspections may be required.

Related Content