80 Watt High Abuse LED Corner Light | 4 Foot | 11000 Lumens | 5000K | 100-277V
This 80 watt LED corner fixture is a strong choice for secure environments where tampering, vandalism, or physical abuse are concerns, thanks to its 16-gauge steel housing, tamper-resistant T25 TORX fasteners, dual-lens system, and verified IP65 and IK10 ratings. Delivering 11,000 lumens at 5000K, it directly replaces 150 watt metal halide corner lights with high efficiency and a 100,000-hour L70 lifespan. Its design is ideal for correctional facilities, detention centers, behavioral health units, and washdown areas.
Dwayne Kula | President, CTO and Founder
Product Specifications
Key Features
| Brand | LED Lighting Supply |
| Watts | 80 |
| Lumens | 11000 |
| Lumens Per Watt | 138 |
| Replaces | 150 Watt Metal Halide |
| Voltage | 100V-277V |
| Color Temperature | 5000K |
| CRI | 80+ |
| Dimming | 0-10V |
| Optics | .125 Prismatic Acrylic Inner Lens | .125 Clear Polycarbonate Outer Lens |
| Lifespan | 100,000 (L70) hours |
| Mounting | Surface or Wall |
| Fixture Color | White |
| Frequency (Hz) | 50/60 |
| Power Factor | >0.9 |
Durable Construction
| Housing | 16-Gauge Cold Roll Steel |
| Fasteners | Tamper-Resistant T25 TORX Screws |
| IP Rating | IP65 |
| IK Rating | IK10 |
| Certifications | ETL | Rebate Eligible |
| Warranty | 5 years |
Measurements
| Dimensions (in) | 7.63 x 7.63 x 48 |
Product Overview
This 80-watt high abuse LED corner light is a 4-foot detention-grade fixture for secure, vandal-resistant lighting installations. It produces 11,000 lumens at 5000K and mounts on surfaces or walls.
The steel housing, impact-resistant lens assembly, and tamper-resistant fasteners support installations where fixture access and physical abuse are ongoing concerns. It is listed as a replacement for 150-watt metal halide lighting.
Core Performance and Output
The fixture delivers 11,000 lumens from 80 watts, producing 138 lumens per watt. The 5000K color temperature and 80+ CRI provide a cool white light output.
A .125-inch prismatic acrylic inner lens and .125-inch clear polycarbonate outer lens distribute and protect the light source. The fixture operates on 100-277V, 50/60 Hz power and has a power factor above 0.9.
Its 11,000-lumen output can be excessive in low mounting positions without dimming or layout control. Higher mounting positions require layout review to maintain uniform coverage along the fixture run.
Adjustability and Control Options
This fixture supports 0-10V dimming. Dimming can be used where the installed light level needs adjustment after commissioning.
The fixture does not include adjustable wattage or selectable color temperature. Output remains 80 watts and color temperature remains 5000K.
Longevity and Reliability
The LED system is rated for 100,000 hours at L70. This rating supports long operating periods where fixture access may be limited.
The 5-year warranty covers the fixture under its stated warranty terms. Tamper-resistant T25 TORX screws help keep the enclosure secured during long-term use.
Build Quality and Physical Characteristics
The housing is constructed from 16-gauge cold roll steel and finished in white. Fixture dimensions are 7.63 inches by 7.63 inches by 48 inches.
The fixture is rated IP65 and IK10. The two-layer lens assembly combines a prismatic acrylic inner lens with a clear polycarbonate outer lens.
Where This Product Fits Best
This fixture fits secure indoor lighting locations requiring a linear, surface-mounted or wall-mounted detention-grade fixture. Its high-abuse construction aligns with areas where exposed fixtures require tamper-resistant hardware and impact protection.
- detention facility lighting
- correctional facility lighting
- secure area lighting
- vandal resistant lighting
- psychiatric facility lighting
- holding cell lighting
- secure corridor lighting
IP65 and IK10 ratings support installations requiring protected enclosures and impact resistance. The 4-foot form factor is suited to continuous corridor runs and individual secure-area fixture locations.
Installation and Long-Term Use
The fixture mounts directly to a surface or wall. Installers should confirm the mounting surface, mounting height, available voltage, and 0-10V control wiring before installation.
The 48-inch housing requires a straight, supported mounting location. Tamper-resistant T25 TORX screws require the appropriate tool for installation and future service access.
How This Fixture Is Commonly Used
In detention facility lighting and correctional facility lighting, the fixture is positioned where a protected linear fixture is required along walls or ceilings. In secure corridor lighting, fixtures are commonly arranged in repeated runs to maintain consistent light along the travel path.
Holding cell lighting and psychiatric facility lighting layouts use mounting height and fixture placement based on the room configuration and required light level. Spacing varies with mounting height, surface reflectance, and the target illumination level.
Safety, Certifications, and Warranty
This fixture is ETL certified and rebate eligible. It is rated IP65 and IK10.
The fixture includes tamper-resistant T25 TORX screws. Warranty coverage is 5 years.
Frequently Asked Questions
Q: What light output does this fixture provide?
A: The fixture produces 11,000 lumens at 80 watts, or 138 lumens per watt.
Q: Does this fixture support dimming?
A: Yes. The fixture supports 0-10V dimming.
Q: What mounting methods are available?
A: The fixture is designed for surface mounting or wall mounting.
Q: What should be considered when planning fixture spacing?
A: Mounting height, target light levels, surface reflectance, and layout requirements affect spacing. A specific spacing value is not established by the supplied product data.
Q: What ratings protect the fixture enclosure?
A: The fixture is rated IP65 and IK10. It uses a 16-gauge cold roll steel housing and tamper-resistant T25 TORX screws.
Application Questions and Clarification
Q: Which applications align with this detention-grade fixture?
A: The listed applications include detention facility lighting, correctional facility lighting, secure area lighting, vandal resistant lighting, psychiatric facility lighting, holding cell lighting, and secure corridor lighting.
Q: What electrical information should be confirmed before installation?
A: Confirm that the available supply voltage is within the fixture’s 100-277V operating range. Confirm 0-10V control wiring when dimming is required.
Q: What should be reviewed for surface or wall mounting?
A: Review the mounting surface, fixture location, and access needed for the tamper-resistant T25 TORX fasteners. The fixture measures 7.63 inches by 7.63 inches by 48 inches.
Web ID: 2633
