90 Watt LED Street Light | 14400 Lumens | 5000K | 100V-277V | Type 3 | Photocell Optional

Product Overview

This 90 watt LED street light delivers 14400 lumens at 160 lumens per watt, replacing 400 watt metal halide fixtures. The fixture operates on 100V-277V input at 50-60Hz and is available in 3000K, 4000K, or 5000K color temperatures with a CRI of 70+.

The Type 3 distribution pattern is standard, with Type 2, Type 4, and Type 5 distributions available as options. Optics consist of tempered glass with a polycarbonate lens. The fixture supports 1-10V dimming and accepts an optional photocell for dusk-to-dawn operation.

Construction is aluminum alloy with a black finish. The fixture measures 24 x 11 x 6.1 inches and weighs 14.5 pounds, with an EPA rating of 2.0 for wind load calculations.

Where This Product Fits Best

This fixture is designed for pole-mounted roadway and area lighting applications where a Type 3 distribution is appropriate. Type 3 optics throw light forward and to the sides, making this fixture well-suited for street lighting, parking lot perimeters, and pathways where the pole is positioned at or near the edge of the area being lit.

The IP66 rating allows installation in locations exposed to rain, wind-driven dust, and direct water spray. The IK09 impact rating supports use in areas where the fixture may be subject to incidental physical contact or debris. Surge protection rated at 5kV line-to-line and 10kV line-to-earth provides resilience against electrical transients common in outdoor distribution circuits.

The 100V-277V operating range covers standard commercial voltage configurations without requiring external transformers or voltage matching.

Performance and Functional Considerations

At 14400 lumens and 160 lumens per watt, this fixture provides the output typically expected from a 400 watt metal halide while drawing 90 watts. The 131,000 hour L70 lifespan indicates the point at which lumen output is projected to depreciate to 70 percent of initial rated output.

Color temperature selection between 3000K, 4000K, and 5000K allows matching to existing site lighting or meeting specific municipal or project requirements. The 70+ CRI is consistent with roadway and area lighting standards where color rendering is secondary to visibility and coverage.

The 1-10V dimming capability allows integration with external dimming controls where reduced output is needed during low-traffic periods or for energy management.

Installation and Long-Term Use

The fixture mounts directly to poles and has an EPA rating of 2.0 for wind load calculations. At 14.5 pounds, handling during installation is manageable for a single technician, though pole height and access conditions will dictate crew requirements.

The aluminum alloy housing and IP66 rating support long-term outdoor exposure without requiring supplemental enclosures. The IK09 impact rating provides resistance to moderate physical impacts from sources such as thrown objects or branch contact.

Surge protection at 5kV line-to-line and 10kV line-to-earth reduces the likelihood of premature failure from grid transients and nearby lightning activity. The 5-year warranty covers defects in materials and workmanship under normal use conditions.

How This Fixture Is Commonly Used

Once installed, this fixture operates as a fixed-output luminaire unless connected to a 1-10V dimming signal. Facilities using external lighting controls or building management systems can adjust output levels through the dimming input. Without a dimming signal, the fixture runs at full output.

The optional photocell enables automatic on-off switching based on ambient light levels, eliminating the need for timers or manual switching. This is the standard approach for street and area lighting where consistent dusk-to-dawn operation is expected.

The Type 3 distribution directs the majority of light forward and laterally, which affects pole placement decisions. For applications requiring different throw patterns, Type 2, Type 4, and Type 5 optics are available.

Safety, Certifications, and Warranty

This fixture is ETL listed and rebate eligible. The IP66 rating allows exposure to powerful water jets and complete dust ingress protection. The IK09 rating provides resistance to impacts equivalent to moderate external force.

Surge protection is rated at 5kV line-to-line and 10kV line-to-earth. We provide a 5-year warranty on this fixture.

Frequently Asked Questions

What voltage does this fixture require?
The fixture operates on 100V-277V at 50-60Hz, covering standard commercial and municipal voltage configurations.

What does this fixture replace?
This 90 watt LED street light replaces 400 watt metal halide fixtures.

Is this fixture eligible for utility rebates?
Yes, this fixture is rebate eligible.

What is the IP rating?
IP66. The fixture can be exposed to direct water spray and is fully protected against dust ingress.

What distribution patterns are available?
Type 3 is standard. Type 2, Type 4, and Type 5 distributions are available as options.

What is the warranty period?
This fixture carries a 5-year warranty.

Is a photocell included?
The photocell is optional and available as an accessory.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.