30 Watt LED Street Light | 4800 Lumens | 3000K / 4000K / 5000K | 100V-277V | Type 3 | Photocell Optional

Product Overview

This 30 Watt LED Cobra Head Light is designed for street and roadway lighting applications where efficient, reliable illumination is required. It delivers 4800 lumens at 5000K, with selectable color temperatures available. The fixture is engineered for pole mounting and is suitable for mounting heights typically found in neighborhood streets, municipal roadways, and campus road networks. The Type 3 distribution provides broad lateral coverage, making it appropriate for perimeter and roadway installations where uniformity and cutoff are important.

The fixture is ETL listed, IP66 rated for outdoor environments, and features an IK09 impact rating. It is a direct replacement for 100 Watt metal halide cobra head luminaires, offering significant energy savings and reduced maintenance. The optional photocell supports dusk-to-dawn operation for automated control in exterior settings.

Core Performance and Output

This cobra head fixture outputs 4800 lumens at 30 watts, achieving 160 lumens per watt. The Type 3 optic is standard, with Type 2, 4, and 5 available for alternate distribution requirements. The fixture operates on 100V-277V input and supports 1-10V dimming for integration with lighting controls. The beam pattern is designed for roadway and perimeter coverage, minimizing spill and glare.

At mounting heights below 12 feet, output may be excessive for pedestrian-focused areas. Uniformity can be reduced if spacing exceeds typical pole intervals for local roadways. The fixture is not intended for high-mast or large-area applications.

Adjustability and Control Options

The fixture supports 1-10V dimming, allowing for integration with external controls or adaptive lighting systems. An optional photocell can be installed for autonomous dusk-to-dawn operation. Color temperature can be specified at 3000K, 4000K, or 5000K to match site requirements or municipal standards.

Distribution type can be selected at order to address specific roadway or perimeter lighting needs. No field-adjustable optics or tool-free entry are included. The fixture is not designed for tilt or aiming adjustments after installation.

Longevity and Reliability

The LED system is rated for 131,000 hours (L70), supporting long-term operation with minimal lumen depreciation. The fixture includes surge protection rated at 4kV line-line and 6kV line-earth, providing resilience against common electrical disturbances in outdoor environments.

IP66 ingress protection and an IK09 impact rating ensure the fixture withstands exposure to weather and incidental contact. The sealed housing and tempered glass lens prevent water and dust intrusion, supporting reliable performance over the service life.

Build Quality and Physical Characteristics

The housing is constructed from aluminum alloy with a black finish. The fixture measures 21 x 10 x 6.1 inches and weighs 12.5 lbs. The lens is tempered glass with a polycarbonate overlay for impact resistance. All hardware is designed for outdoor durability and corrosion resistance.

Pole mounting is standard, with an EPA rating of 1.6. The fixture is compatible with standard roadway and site lighting poles. The design supports secure installation and resists wind loading within typical municipal and campus environments.

Where This Product Fits Best

This cobra head LED fixture is intended for exterior environments requiring reliable, energy-efficient roadway and perimeter lighting. It is suitable for municipal, campus, and private road networks where Type 3 distribution and moderate output are appropriate. The fixture is also used for neighborhood and subdivision lighting where pole heights and spacing align with the output and coverage pattern.

• street lighting
• roadway lighting
• municipal lighting
• neighborhood lighting
• campus roadway lighting
• private road lighting
• subdivision lighting
• parking lot perimeter lighting

Environmental characteristics include full outdoor exposure, wet location suitability, and resistance to impact and weather. The fixture is not intended for high-mast, sports, or large-area floodlighting applications.

Installation and Long-Term Use

The fixture is designed for pole mounting using standard hardware. Installation is straightforward for crews familiar with cobra head luminaires. The weight and size allow for single-person handling at ground level, but pole-top installation may require lift equipment depending on mounting height.

Routine maintenance is minimal due to the sealed housing and long LED life. The tempered glass lens can be cleaned with standard exterior cleaning methods. Photocell replacement, if equipped, is accessible from the top of the fixture. No internal service is required during normal operation.

How This Fixture Is Commonly Used

Typical mounting heights range from 12 to 20 feet, depending on roadway width and required coverage. Fixtures are spaced to provide uniform illumination along streets, campus roads, or subdivision lanes, with pole intervals commonly between 80 and 120 feet. Type 3 distribution supports lateral coverage for two-lane roads and perimeter areas.

Higher output reduces the number of fixtures needed but may increase perceived brightness at lower mounting heights. Spacing and layout should be coordinated with site photometric plans to ensure uniformity and compliance with local standards.

Safety, Certifications, and Warranty

This fixture is ETL listed and meets IP66 and IK09 ratings. Surge protection is integrated for outdoor electrical safety. The product is rebate eligible where applicable. All components are rated for outdoor use and comply with relevant safety standards.

Warranty coverage is provided as specified by LED Lighting Supply. Refer to product documentation for warranty terms and conditions.

Frequently Asked Questions

Q: What is the recommended mounting height for this 30W cobra head fixture?

A: Typical mounting heights are 12 to 20 feet, depending on the width of the roadway and desired coverage.

Q: Can this fixture be used with a photocell for dusk-to-dawn operation?

A: Yes, an optional photocell is available for automated dusk-to-dawn control.

Q: What type of pole is compatible with this fixture?

A: The fixture is designed for standard roadway and site lighting poles with appropriate EPA and mounting hardware.

Q: Is the fixture suitable for high-mast or large-area lighting?

A: No, the output and distribution are intended for street, roadway, and perimeter applications at moderate mounting heights.

Q: How should fixtures be spaced for uniform street lighting?

A: Spacing typically ranges from 80 to 120 feet, but should be confirmed with a photometric layout based on site conditions and required light levels.

Application Questions and Clarification

Q: Is this fixture appropriate for campus roadway lighting projects?

A: Yes, the output and distribution are suitable for campus roadways and similar environments.

Q: Can this cobra head light be used for parking lot perimeter lighting?

A: Yes, it is commonly used for parking lot perimeters where moderate output and Type 3 distribution are required.

Q: Is this fixture designed for use in subdivision or neighborhood street lighting?

A: Yes, it is appropriate for subdivision and neighborhood streets with typical pole heights and spacing.

Q: Does the fixture support alternate beam distributions for different roadway layouts?

A: Yes, Type 2, 4, and 5 optics are available to address specific site requirements.