150 Watt LED Street Light | 24000 Lumens | 3000K / 4000K/ 5000K | 100V-277V | Type 3 | Photocell Optional

Product Overview

This 150 Watt LED Cobra Head Street Light is designed for exterior pole-mounted lighting along roadways, municipal streets, and parking lot perimeters. It delivers a Type 3 distribution pattern suitable for standard two-lane roadways and perimeter zones. Typical mounting heights range from 20 to 35 feet, making it a direct replacement for legacy 400W metal halide fixtures in public and private roadway environments.

The fixture is built for continuous outdoor operation in demanding municipal and commercial settings. It supports 100V-277V input, offers selectable color temperatures (3000K, 4000K, 5000K), and includes an optional photocell for dusk-to-dawn control. The housing is engineered for pole mounting and long-term exposure to weather and vibration.

Core Performance and Output

This fixture outputs 24,000 lumens at 150 watts, providing 160 lumens per watt system efficacy. The standard Type 3 optic delivers a lateral distribution pattern for roadway and perimeter coverage. Optional Type 2, 4, and 5 optics are available for alternate site geometries. The fixture supports 1-10V dimming for adaptive control and energy management.

Uniformity and coverage are optimized for typical pole spacing on municipal streets and parking lot perimeters. Excessive output may create glare at mounting heights below 18 feet. At mounting heights above 35 feet, uniformity may decrease without tighter pole spacing or alternate optics.

Adjustability and Control Options

The fixture supports 1-10V dimming for integration with external lighting controls or adaptive dimming systems. An optional photocell enables autonomous dusk-to-dawn operation. Color temperature can be specified at 3000K, 4000K, or 5000K to match site requirements or municipal standards.

Optical distribution can be field-specified with alternate lenses (Type 2, 4, 5) for non-standard roadway or perimeter layouts. No onboard motion sensor is included. All adjustments are made at installation or via external controls.

Longevity and Reliability

The fixture is rated for 131,000 hours (L70) at ambient temperatures typical of exterior pole environments. The LED driver and array are thermally managed within a sealed aluminum housing. Surge protection is integrated (5kV line-line, 10kV line-earth) to withstand utility transients and lightning events.

Ingress protection is IP66, and impact resistance is IK09. The fixture is designed for continuous operation in outdoor environments with minimal maintenance. No routine relamping is required.

Build Quality and Physical Characteristics

The housing is constructed from corrosion-resistant aluminum alloy with a black finish. The lens assembly uses tempered glass and a polycarbonate optical shield for impact and weather resistance. The fixture measures 27 x 12 x 6.1 inches and weighs 19.5 lbs.

Pole mounting hardware is included for standard tenon or arm installations. The fixture is engineered for vibration resistance and long-term structural integrity on municipal and commercial poles.

Where This Product Fits Best

This cobra head LED street light is intended for exterior pole-mounted lighting along public and private roadways, municipal streets, and neighborhood thoroughfares. It is also suitable for campus and subdivision roadways, as well as parking lot perimeter lighting where a Type 3 distribution is required.

• street lighting
• roadway lighting
• municipal lighting
• neighborhood lighting
• campus roadway lighting
• private road lighting
• subdivision lighting
• parking lot perimeter lighting

Designed for outdoor use in all weather conditions. IP66 and IK09 ratings support installation in areas exposed to rain, wind, and occasional impact. Not intended for environments requiring hazardous location or marine ratings.

Installation and Long-Term Use

The fixture mounts to standard poles using included hardware. It supports both new installations and one-for-one replacements of legacy cobra head or shoebox luminaires. Typical mounting heights are 20 to 35 feet, with spacing determined by required light levels and site geometry.

Routine maintenance is limited to periodic cleaning of the lens and inspection of pole hardware. The sealed housing and integrated surge protection reduce the risk of water ingress and electrical failure. Photocell and dimming controls can be field-configured as needed.

How This Fixture Is Commonly Used

Commonly installed on municipal street poles, campus roadways, and subdivision thoroughfares at heights between 20 and 35 feet. Spacing typically ranges from 80 to 120 feet depending on pole height, distribution type, and target light levels. Used for both new construction and retrofit projects replacing 400W metal halide fixtures.

Higher output allows for wider pole spacing but may increase glare if installed at lower mounting heights. Type 3 distribution is standard for roadways; alternate optics are specified for unique site layouts or perimeter zones.

Safety, Certifications, and Warranty

This fixture is ETL listed and meets rebate eligibility requirements. It is rated IP66 for water and dust ingress and IK09 for impact resistance. Integrated surge protection is included. The housing and lens are designed for safe operation in exterior environments.

Warranty coverage is provided for defects in materials and workmanship. Refer to documentation for specific warranty terms and conditions.

Frequently Asked Questions

Q: What is the recommended mounting height for this 150W cobra head street light?

A: Typical mounting heights range from 20 to 35 feet for optimal roadway and perimeter coverage.

Q: Can this fixture be used to replace a 400W metal halide street light?

A: Yes, this fixture is designed as a direct replacement for 400W metal halide cobra head luminaires.

Q: What type of pole mounting is supported?

A: The fixture mounts to standard tenon or arm poles using included hardware.

Q: Is a photocell included with the fixture?

A: A photocell is available as an optional accessory and can be specified at installation.

Q: What is the expected lifespan of the LEDs?

A: The fixture is rated for 131,000 hours (L70) under typical outdoor operating conditions.

Q: How should I plan pole spacing for uniform coverage?

A: Pole spacing typically ranges from 80 to 120 feet, depending on mounting height, distribution type, and required light levels.

Application Questions and Clarification

Q: Is this fixture suitable for campus roadway lighting?

A: Yes, this fixture is commonly used for campus roadway and private road lighting applications.

Q: Can this be installed on subdivision streets or neighborhood roads?

A: This fixture is appropriate for subdivision lighting and neighborhood street applications.

Q: Is this fixture intended for parking lot perimeter lighting?

A: Yes, it is suitable for parking lot perimeter lighting where a Type 3 distribution is required.

Q: Does this fixture have hazardous location or marine ratings?

A: No, this fixture is not rated for hazardous or marine environments. It is intended for standard exterior roadway and perimeter use.