150 Watt LED Cobra Head Street Light | 22700 Lumens | 5000K | 100-277V | Type 3

Product Overview

This 150-watt LED cobra head street light produces 22,700 lumens at 5000K through a Type 3 distribution. It is designed for pole-mounted street lighting, roadway lighting, municipal lighting, and neighborhood lighting.

The fixture operates on 100-277V power and is a listed replacement for 400-watt metal halide fixtures. Its gray aluminum alloy housing and IP65 rating support exterior pole installations exposed to weather.

Core Performance and Output

The fixture delivers 151 lumens per watt with a 70+ CRI. The Type 3 distribution directs light outward from the pole in a forward-throw pattern suited to roadway and perimeter layouts.

Electrical performance includes 100-277V operation, 50/60Hz frequency, 0.95 power factor, and THD below 20%. The 22,700-lumen output can be excessive where poles are closely spaced or where low-level neighborhood lighting is required.

Type 3 optics require the pole location and roadway geometry to match the intended light direction. Layout uniformity depends on pole placement, mounting height, and required light levels.

Adjustability and Control Options

This configuration has fixed 150-watt output, fixed 5000K color temperature, and a fixed Type 3 beam distribution. No dimming, photocell, motion sensor, or control options are identified in the supplied specifications.

Confirm the required control method before installation when the site requires scheduled operation, daylight response, or reduced output periods.

Longevity and Reliability

The listed operating life is 70,000 hours. Long service life can reduce fixture replacement activity on pole-mounted roadway and municipal lighting systems.

Reliability also depends on stable line voltage, correct pole mounting, and maintaining the housing and lens assembly in serviceable condition. Inspect the fixture during routine pole and site-lighting maintenance.

Build Quality and Physical Characteristics

The fixture uses an aluminum alloy housing with a PC lens. The housing is gray and measures 18.7 by 10.8 inches.

Fixture weight is 10 pounds. Pole mounting is required, and the pole head, arm, and mounting interface must support the fixture weight and intended orientation.

Where This Product Fits Best

This cobra head fixture fits pole-mounted exterior lighting systems where a Type 3 roadway distribution is needed. Its output level is suited to established roadway, street, and municipal lighting layouts.

• roadway lighting
• street lighting
• municipal lighting
• neighborhood lighting
• campus roadway lighting
• private road lighting

The IP65 housing supports outdoor exposure. The fixture is intended for locations served by 100-277V power and pole-mounted installations.

Installation and Long-Term Use

Install the fixture on a compatible pole-mounted arm or pole head with the Type 3 distribution aimed along the intended roadway direction. Confirm fixture orientation before final tightening because the optical pattern is directional.

Verify available voltage is within the 100-277V range. Inspect mounting hardware, wiring connections, housing condition, and lens condition during long-term maintenance.

How This Fixture Is Commonly Used

For street lighting, roadway lighting, and private road lighting, fixtures are mounted on poles and aligned so the Type 3 distribution projects forward along the travel path. Municipal lighting and campus roadway lighting layouts typically follow the pole locations already established for the site.

Mounting height and pole spacing are set by the required light levels, roadway width, and layout geometry. Higher output can reduce fixture count, but it can also require greater attention to uniformity and glare.

Safety, Certifications, and Warranty

This fixture is UL listed and rebate eligible. It is IP65 rated.

Warranty terms are not provided in the supplied specifications. Follow applicable electrical and pole-mounting requirements during installation and service.

Frequently Asked Questions

Q: What is the light output of this cobra head fixture?

A: This fixture produces 22,700 lumens at 150 watts.

Q: What beam distribution does this fixture use?

A: The standard beam distribution is Type 3.

Q: What voltage does this fixture accept?

A: The fixture operates on 100-277V power at 50/60Hz.

Q: What should be considered when planning pole spacing and fixture layout?

A: Mounting height, roadway geometry, target light levels, pole locations, and the Type 3 distribution affect layout. A specific spacing value is not established by the supplied product data.

Application Questions and Clarification

Q: Is this fixture appropriate for roadway lighting and street lighting?

A: Yes. Roadway lighting and street lighting are primary applications for cobra head lights, and this fixture provides a Type 3 distribution for pole-mounted installation.

Q: Can this fixture be used for neighborhood lighting?

A: Neighborhood lighting is a primary application for cobra head lights. Confirm that the 22,700-lumen output and Type 3 distribution match the required site light levels and layout.

Q: What environmental rating does this fixture have for municipal lighting?

A: The fixture is IP65 rated and uses an aluminum alloy housing with a PC lens.

Web ID: 1957