450 Watt LED Shoebox Area Light | 58500 Lumens | Type 3 | 5000K | 100V-277V or 277V-480V

Product Overview

This 450 Watt LED Shoebox Area Light is engineered for large-scale exterior site lighting. It delivers 58,500 lumens at 5000K with a Type 3 distribution, supporting both 100-277V and 277-480V input. The fixture is designed for pole-mounted applications in expansive parking lots, commercial sites, and perimeter areas where high-output, uniform coverage is required. Typical mounting heights range from 25 to 40 feet, making it a direct replacement for 1000W or 1500W metal halide systems.

The housing is constructed from die-cast aluminum with a bronze finish and is IP65 rated for outdoor environments. Multiple mounting options?arm, slip fitter, or trunnion?support a range of pole and bracket configurations. This model is UL listed and suitable for use in demanding exterior conditions.

Core Performance and Output

This fixture outputs 58,500 lumens at 130 lumens per watt, providing high-efficiency illumination for large exterior areas. The Type 3 optic delivers a wide lateral spread, supporting uniform coverage across parking lots and site perimeters. Color temperature is fixed at 5000K for maximum visibility and security.

Electrical performance includes a power factor of 0.9 and THD of 15%. The fixture supports both 100-277V and 277-480V operation, accommodating a range of site power conditions. At mounting heights below 20 feet, output may be excessive and increase glare; optimal performance is achieved at 25 feet and above. Uniformity may decrease at mounting heights above 40 feet without careful layout planning.

Adjustability and Control Options

The fixture supports 1-10V dimming for integration with lighting controls and energy management systems. Dimming enables scheduled or occupancy-based operation to reduce energy use during low-traffic periods. The Type 3 distribution is fixed and not field-adjustable, so beam pattern is determined by mounting orientation and pole placement.

Mounting options include arm, slip fitter, and trunnion, allowing for precise aiming and compatibility with a range of pole types. No integrated motion or photocell is included; external controls can be added as required by site design.

Longevity and Reliability

L70 rated life is 50,000 hours, supporting multi-year operation with minimal maintenance. The die-cast aluminum housing and polycarbonate lens provide resistance to impact, weather, and UV exposure. The fixture is designed for continuous outdoor use in commercial and industrial environments.

IP65 ingress protection prevents dust and water intrusion during rain or washdown. The LED driver and components are rated for 50/60 Hz operation and are thermally managed for long-term reliability. Routine inspection and cleaning are recommended to maintain optical performance in dusty or debris-prone areas.

Build Quality and Physical Characteristics

The fixture measures 36 inches long by 13 inches wide and 3.7 inches high, with a total weight of 25 lbs. The housing is bronze-finished die-cast aluminum, providing structural rigidity and corrosion resistance. The polycarbonate lens is impact-resistant and designed for outdoor exposure.

EPA rating is 2.5, supporting use on standard commercial poles with appropriate wind load calculations. All mounting hardware is designed for secure attachment to square or round poles, with slip fitter and trunnion options for retrofit or new installations. The fixture color is bronze to match common site standards.

Where This Product Fits Best

This LED shoebox light is suited for large exterior environments requiring high-output, uniform illumination. It is commonly installed in:

• parking lot lighting
• area lighting
• commercial site lighting
• roadway perimeter lighting
• tennis court lighting
• pickleball court lighting
• horse arena lighting
• dealership lighting

Environments include open parking areas, commercial campuses, dealership lots, and outdoor sports courts. The fixture is suitable for wet locations and continuous outdoor exposure. Not recommended for mounting heights below 20 feet due to high output.

Installation and Long-Term Use

Mounting options support direct installation to square or round poles using arm, slip fitter, or trunnion brackets. The fixture?s weight and EPA require secure pole mounting and proper wind load assessment. Electrical connections are made via standard wiring methods for 100-277V or 277-480V circuits.

Routine maintenance is limited to periodic cleaning of the lens and inspection of mounting hardware. The fixture is designed for minimal service requirements over its rated life. Replacement of the entire unit is typical at end of life, as LED modules and drivers are not field-serviceable.

How This Fixture Is Commonly Used

Typical mounting heights range from 25 to 40 feet, with spacing determined by required light levels and site geometry. For parking lots, fixtures are often spaced 3 to 5 pole heights apart to balance uniformity and coverage. On sports courts or dealership lots, closer spacing may be used to increase vertical illumination.

Higher output allows for reduced fixture count, but may increase glare if not properly aimed or shielded. Layout should consider pole placement, mounting height, and site obstructions to achieve target light levels and uniformity.

Safety, Certifications, and Warranty

This fixture is UL listed and IP65 rated for wet locations. It meets requirements for exterior commercial lighting installations. The product is eligible for utility rebate programs where applicable.

A 5-year warranty covers manufacturing defects and component failure under normal operating conditions. All safety and certification markings are present on the fixture label for inspection and compliance documentation.

Frequently Asked Questions

Q: What is the recommended mounting height for this 450W shoebox light?

A: Recommended mounting height is 25 to 40 feet for optimal coverage and uniformity.

Q: Can this fixture be used with existing 480V site wiring?

A: Yes, the fixture supports both 100-277V and 277-480V input. Confirm voltage before installation.

Q: What mounting options are available?

A: Arm, slip fitter, and trunnion mounting options are available for compatibility with most pole types.

Q: Is this fixture suitable for use in wet locations?

A: Yes, the fixture is IP65 rated for wet location use and continuous outdoor exposure.

Q: How many fixtures are needed for a standard commercial parking lot?

A: Fixture count depends on lot size, pole spacing, and required light levels. Typical layouts use 3 to 5 pole heights for spacing.

Application Questions and Clarification

Q: Is this fixture appropriate for dealership lot lighting?

A: Yes, this model is commonly used for dealership lighting where high-output, uniform coverage is required.

Q: Can this be used for tennis or pickleball court lighting?

A: Yes, the Type 3 distribution and high output support use on outdoor tennis and pickleball courts at appropriate mounting heights.

Q: Is this fixture suitable for horse arena lighting?

A: Yes, this model is used for horse arena lighting, providing broad, uniform illumination for large open areas.

Q: What is the EPA rating and why does it matter?

A: The EPA rating is 2.5. This value is used to determine pole suitability and wind load capacity for safe installation.