150 Watt LED Shoebox Area Light | 19500 Lumens | 5000K | 100V-277V or 277-480V

Product Overview

This 150 Watt LED Shoebox Area Light is designed for exterior site and area lighting where reliable, efficient illumination is required. It delivers 19,500 lumens at 5000K, providing a clear, daylight-white output suitable for replacing 400W metal halide fixtures. The fixture supports 100V-277V or 277V-480V input, making it compatible with a wide range of electrical systems found in commercial and industrial environments.

Typical installations include parking lots, commercial sites, and roadway perimeters where uniform coverage and long-term durability are priorities. The fixture is built for pole, yoke, or slip fitter mounting, allowing for flexible deployment across new and retrofit projects.

Core Performance and Output

This fixture outputs 19,500 lumens at 130 lumens per watt, providing high efficiency for large outdoor areas. The Type 3 beam distribution is engineered for wide, even coverage across parking lots and perimeter zones. Color temperature is fixed at 5000K for maximum visibility and security.

Electrical performance includes a power factor of 0.9 and THD of 15%, supporting stable operation on both 100-277V and 277-480V circuits. Excessive output may occur if installed at low mounting heights, leading to increased glare or over-illumination in small areas. Uniformity may decrease at mounting heights above 30 feet without careful layout planning.

Adjustability and Control Options

The fixture supports 1-10V dimming for integration with lighting controls or occupancy sensors. Multiple mounting options?yoke, arm, or slip fitter?allow for precise aiming and adaptation to existing poles or brackets. The Type 3 optic is fixed and not field-adjustable.

No onboard motion or daylight sensors are included; external controls must be specified separately if required. Dimming performance is consistent across the full voltage range.

Longevity and Reliability

Rated for 50,000 hours (L70), this fixture is designed for long-term operation with minimal maintenance. The die-cast aluminum housing and polycarbonate lens provide resistance to impact and weathering.

Operating temperature range is -40°F to 113°F, supporting year-round use in most climates. The fixture is IP65 rated for protection against dust and water jets, suitable for exposed outdoor environments.

Build Quality and Physical Characteristics

The housing is constructed from die-cast aluminum with a bronze finish for corrosion resistance. The polycarbonate lens is impact-resistant and designed to maintain optical clarity over time.

Fixture dimensions are 20.19 x 13.11 x 6.61 inches, with a weight of 12 lbs. The EPA rating is 1.3, supporting installation on standard area lighting poles without excessive wind load concerns.

Where This Product Fits Best

This LED shoebox light is suited for exterior environments requiring high-output, uniform illumination. It is commonly deployed in commercial and municipal settings where reliability and coverage are critical.

• parking lot lighting
• area lighting
• commercial site lighting
• roadway perimeter lighting
• tennis court lighting
• pickleball court lighting
• horse arena lighting
• dealership lighting

IP65 rating and wide operating temperature range support use in exposed outdoor locations. The fixture is not intended for enclosed or hazardous environments.

Installation and Long-Term Use

Mounting options include yoke, arm, or slip fitter, allowing adaptation to most standard poles and brackets. The fixture?s weight and EPA rating are compatible with typical 20?30 foot pole installations.

Long-term maintenance is limited to periodic cleaning of the lens and inspection of mounting hardware. No relamping is required. Ensure pole and mounting hardware are rated for the fixture?s EPA and weight, especially in high-wind areas.

How This Fixture Is Commonly Used

Standard mounting heights range from 15 to 30 feet, depending on site requirements and desired light levels. Spacing is typically 2 to 3 times the mounting height for uniform coverage in parking lots and open areas.

In sports or court applications, fixtures are often installed on perimeter poles with aiming adjusted for even illumination. Higher output can reduce fixture count but may increase glare if not properly aimed or shielded.

Safety, Certifications, and Warranty

This fixture is UL listed and IP65 rated. It is eligible for utility rebates where applicable. The product is covered by a 5-year warranty from the date of installation.

No special safety procedures are required beyond standard electrical and pole-mounting practices. Always follow local codes and guidelines for outdoor lighting installation.

Frequently Asked Questions

Q: What is the recommended mounting height for this 150W shoebox light?

A: Typical mounting heights are 15 to 30 feet, depending on the application and required light levels.

Q: Can this fixture be installed on existing poles with different mounting arms?

A: Yes, the fixture supports yoke, arm, or slip fitter mounting for compatibility with most standard poles and brackets.

Q: Is this fixture suitable for use in wet outdoor environments?

A: Yes, it is IP65 rated for protection against dust and water jets, supporting use in exposed outdoor locations.

Q: Does the fixture include integrated motion or daylight sensors?

A: No, sensors are not included. External controls can be added if required.

Q: How many fixtures are needed for uniform parking lot coverage?

A: Fixture count depends on lot size, mounting height, and required light levels. Typical spacing is 2 to 3 times the mounting height.

Application Questions and Clarification

Q: Is this fixture appropriate for tennis court or pickleball court lighting?

A: Yes, it is commonly used for tennis and pickleball court lighting when mounted on perimeter poles at appropriate heights.

Q: Can this light be used for dealership or commercial site lighting?

A: Yes, it is suitable for dealership lots and commercial site area lighting where high-output, uniform coverage is needed.

Q: Is this fixture recommended for horse arena lighting?

A: Yes, it is frequently specified for horse arena lighting with proper mounting and aiming for uniformity.

Q: Is this product suitable for municipal or campus area lighting?

A: Yes, it is used in municipal sites and campus lighting projects where exterior area illumination is required.