600 Watt LED High Mast Light | 90,000 Lumens | 5000K | 100-277V or 277-480V

Product Overview

This 750 Watt LED high mast light delivers 112,500 lumens at 5000K. It is designed for large-area outdoor lighting applications where high output and uniformity are required. The fixture uses prismatic glass optics and specialized high mast distributions to maximize coverage and minimize glare.

The housing is die-cast aluminum with a polyester paint finish and a 5,000-hour salt fog rating. The fixture is 3G vibration rated and includes a 10kV surge protector. It is available in both 100-277V and 277-480V input ranges.

Mounting is handled by an adjustable angle mount for a 2 3/8 in O.D. tenon, secured with a 4-bolt system and safety cables. The fixture weighs 60 lbs and is designed for pole mounting.

Photocell control is supported via 3/5/7-pin options. The fixture is UL listed and rated for IP66 and IK08 environments.

Where This Product Fits Best

This fixture is intended for high mast lighting applications where wide-area illumination and high output are required. Typical environments include sports complexes, transportation terminals, large parking lots, and industrial yards.

It is suitable for replacing 2000 Watt metal halide systems, providing a similar or greater light output with improved efficiency and reduced maintenance. The fixture is designed for outdoor use in areas exposed to weather, vibration, and corrosive environments.

The available voltage range (100-277V or 277-480V) allows compatibility with standard and high-voltage electrical systems commonly found in commercial and industrial sites.

Multiple beam angle options (Type 5 standard, with 60°, Type 2, Type 3, and Type 4 available) support a range of pole layouts and site requirements.

Performance and Functional Considerations

This fixture delivers 150 lumens per watt and a total output of 112,500 lumens. The 5000K color temperature provides a neutral white light suitable for visibility and security in outdoor environments.

The prismatic glass optics and high mast-specific distributions ensure uniform coverage and effective glare control. The fixture supports 1-10V dimming or optional dimming configurations.

With a CRI of 70+, the fixture provides adequate color rendering for general outdoor and industrial applications. Power factor is greater than 0.90, and total harmonic distortion is less than 20%.

The fixture is rated for 100,000 hours (L70), supporting long-term operation with minimal maintenance. Operating temperature range is -40°F to 122°F.

Installation and Long-Term Use

The fixture mounts to a 2 3/8 in O.D. tenon using an adjustable angle bracket. Four-bolt mounting and safety cables are included to secure the fixture to the pole and provide additional safety during installation and operation.

The die-cast aluminum housing and polyester finish provide durability in harsh outdoor environments, including areas with salt exposure. The 5,000-hour salt fog rating supports use in coastal or corrosive locations.

IP66 rating protects the fixture against dust and powerful water jets, allowing installation in exposed outdoor locations. IK08 rating provides resistance to moderate impact from external objects.

Photocell control is supported through 3/5/7-pin connections, allowing for integration with site lighting controls as needed.

How This Fixture Is Commonly Used

Once installed, this fixture is typically relied on for consistent, high-output illumination across large outdoor areas. The adjustable angle mount allows you to set the fixture direction to match site requirements and pole layouts.

Beam angle selection at the time of installation determines how the light is distributed across the site. Type 5 provides a wide, uniform pattern, while other available options (60°, Type 2, Type 3, Type 4) can be used to focus or direct light as needed for specific site geometries.

The fixture supports integration with photocell controls, allowing for automated dusk-to-dawn operation if connected. Dimming capability is available for sites that require output adjustment based on occupancy or scheduling.

Routine maintenance is minimized due to the 100,000-hour rated life and robust construction. The fixture is designed to withstand vibration, weather, and physical impacts common in high mast and outdoor environments.

Safety, Certifications, and Warranty

This fixture is UL listed.

It carries an IP66 rating for protection against dust and water exposure. IK08 rating provides impact resistance suitable for outdoor and industrial environments.

The fixture is 3G vibration rated and includes 10kV surge protection for electrical safety in high mast applications.

Warranty coverage is provided by LED Lighting Supply.

Frequently Asked Questions

What voltage ranges are supported?
This fixture is compatible with 100-277V or 277-480V input.

What is the rated lumen output?
The fixture delivers 112,500 lumens.

What environmental ratings does this fixture have?
The fixture is rated IP66 and IK08.

What mounting method is supported?
The fixture mounts to a 2 3/8 in O.D. tenon using an adjustable angle bracket with four-bolt mounting and safety cables.

Is this fixture UL listed?
Yes, this fixture is UL listed.

What is the warranty coverage?
Warranty is provided by LED Lighting Supply.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.