95 Watt LED Canopy Light | 12721 Lumens | 5000K | 100-277V
Neil Peterson | CEO and Chief Lighting Specialist
374 in stock
Product Specifications
Key Features
| Brand | LED Lighting Supply |
| Watts | 95 |
| Lumens | 12721 |
| Lumens Per Watt | 134 |
| Replaces | 250 Watt Metal Halide |
| Voltage | 100V-277V |
| Color Temperature | 5000K |
| CRI | 70+ |
| Dimming | 1-10V |
| Beam Angles (Std) | 110° |
| Lifespan | 50,000 (L70) hours |
| Mounting | Surface |
| Fixture Color | White |
| Frequency (Hz) | 50/60 |
| Power Factor | > .90 |
| THD | < 20% |
Durable Construction
| Housing | Die-Cast Aluminum |
| IP Rating | IP65 |
| Operating Temperature | -22°F to 113°F |
| Certifications | UL | Rebate Eligible |
| Warranty | 5 years |
Measurements
| Dimensions (in) | 17.1 L X 17.1 W X x 4.1 H |
| Weight (lbs) | 9 |
Download IES Files
Product Lighting Layout Estimator
Use this estimator to calculate approximate fixture count, spacing, and average foot-candles for a simple rectangular space using the selected LED fixture. Enter your room dimensions, mounting height, target foot-candles, light loss factor, and room/layout condition to generate a preliminary lighting layout. When IES photometry is available, workplane height and room reflectance controls are shown.
Project Inputs
Estimated Results
Estimated average foot-candles are preliminary and should be verified with a lighting plan for project-critical applications.
Room / Layout Condition: This field is used only when usable IES photometry is not available. In fallback mode, it acts as a simplified room utilization factor for reflectance, fixture distribution, racking, obstructions, and how much fixture light reaches the work area. Open / light-colored spaces use 0.90, typical warehouses or shops use 0.75, racked or obstructed spaces use 0.60, and dark or complex spaces use 0.45. When IES photometry is active, this field is hidden and the estimator uses the selected workplane height, LLF, and simplified reflectance adjustment instead.
Photometry / Simulation Note: When usable IES photometry is available for the selected fixture, this estimator uses the fixture’s IES candela data, selected workplane height, light loss factor, and simplified reflectance adjustment to estimate fixture count, average foot-candles, and visual light distribution. The reflectance adjustment is a conservative approximation and is not a full zonal-cavity, radiosity, or professional photometric room calculation. When IES photometry is not available, the estimator uses a simulated beam model based on lumens, mounting height, room/layout condition, light loss factor, and beam angle.
Preliminary Estimate Only: This estimator is intended for simple square or rectangular spaces and should be used as a planning aid, not a final photometric lighting plan. Actual light levels may vary based on fixture optics, selected IES file, mounting conditions, workplane height, ceiling height, surface reflectance, obstructions, controls, voltage, installation conditions, and site-specific requirements. Project-critical applications should be verified with a formal lighting plan.
This estimate is a starting point. Warehouses, industrial facilities, hazardous locations, sports areas, schools, healthcare spaces, public areas, and code-sensitive projects may require a reviewed lighting layout before purchase or installation.
Product Overview
This 95-watt LED canopy light provides 12,721 lumens at 5000K for surface-mounted canopy lighting. It is configured for 100-277V operation and uses a 110-degree beam distribution.
The fixture is commonly used as a 250-watt metal halide replacement where canopy-mounted lighting needs a broad, downward distribution. Its white die-cast aluminum housing measures 17.1 inches square and 4.1 inches high.
Core Performance and Output
This fixture produces 12,721 lumens at 134 lumens per watt. The 5000K color temperature and 70+ CRI provide a cool white output for canopy areas.
The standard 110-degree beam angle distributes light across a broad area below the mounting surface. Output can be excessive at lower mounting heights, while higher mounting heights can reduce light levels and uniformity at the canopy perimeter.
Adjustability and Control Options
The fixture supports 1-10V dimming. Dimming control wiring must be included in the installation when dimming operation is required.
It operates on 100-277V, 50/60 Hz power. Power factor is greater than 0.90, and total harmonic distortion is less than 20%.
Longevity and Reliability
The rated lifespan is 50,000 L70 hours. L70 indicates the point at which light output reaches 70% of its initial level.
The operating temperature range is -22 degrees F to 113 degrees F. Long-term performance depends on maintaining the fixture within this temperature range and protecting electrical connections during installation.
Build Quality and Physical Characteristics
The housing is die-cast aluminum with a white finish. The fixture weighs 9 pounds and is designed for surface mounting.
IP65 construction protects the fixture from dust and water exposure. The low-profile 17.1-inch square housing fits flat canopy mounting surfaces.
Where This Product Fits Best
This canopy light fits covered vehicle and pedestrian canopy areas that need broad downward illumination from a surface-mounted fixture. The 95-watt output is suited to gas station and fueling canopy installations.
- gas station lighting
- fueling area lighting
- parking canopy lighting
- drive-through canopy lighting
- loading canopy lighting
- entry canopy lighting
The IP65 rating supports covered exterior canopy conditions. Surface mounting requires a flat mounting location that can support the fixture weight and electrical connections.
Installation and Long-Term Use
The fixture mounts directly to a surface. Installers should confirm the mounting surface, supply voltage, branch wiring, and dimming wiring before installation.
Fixture placement should account for canopy geometry, mounting height, and the 110-degree distribution. Electrical connections should remain protected from moisture and properly enclosed for the installation condition.
How This Fixture Is Commonly Used
In gas station lighting and fueling area lighting, fixtures are arranged across the canopy underside to maintain light continuity below the structure. Parking canopy lighting and drive-through canopy lighting layouts generally follow the canopy bays and traffic path.
Mounting height affects the footprint and brightness below each fixture. Wider spacing reduces fixture count but can reduce uniformity between fixtures, especially near canopy edges.
Safety, Certifications, and Warranty
This fixture is UL listed and rebate eligible. It is rated IP65.
The warranty period is 5 years. The fixture operates from -22 degrees F to 113 degrees F.
Frequently Asked Questions
Q: What is the light output of this canopy light?
A: This fixture produces 12,721 lumens while using 95 watts.
Q: What metal halide fixture does this light replace?
A: This LED canopy light replaces a 250-watt metal halide fixture.
Q: Does this fixture support dimming?
A: Yes. It supports 1-10V dimming.
Q: What should be considered when planning fixture placement?
A: Mounting height, canopy geometry, target light levels, and the 110-degree beam distribution affect fixture placement. A specific spacing value is not established by the supplied product data.
Application Questions and Clarification
Q: Is this fixture appropriate for gas station lighting and fueling area lighting?
A: The 95-watt fixture provides 12,721 lumens with a 110-degree beam angle and IP65 rating for these canopy applications.
Q: What mounting method does this fixture use?
A: This fixture uses surface mounting.
Q: What electrical range is supported?
A: The fixture operates on 100-277V, 50/60 Hz power.
Web ID: 1971
