30 / 40 / 55 Watt Adjustable LED Canopy Light | 3900 to 7150 Lumens | 3500K / 4000K / 5000K Adjustable | 100-277V

Product Overview

This adjustable LED canopy light is designed for covered exterior environments requiring reliable, uniform illumination. It offers selectable wattage settings of 30, 40, or 55 watts and delivers up to 7150 lumens, making it suitable for replacing 250W metal halide fixtures in gas station canopies and parking structures. The fixture supports both surface and pendant mounting, allowing flexibility for retrofit or new installations in commercial canopy settings.

Color temperature can be set to 3500K, 4000K, or 5000K to match site requirements or existing lighting. The compact 9-inch square form factor and low profile allow for installation in areas with limited ceiling space or where a clean, unobtrusive appearance is needed.

Core Performance and Output

This canopy light provides three selectable output levels: 3900, 5200, or 7150 lumens, with an efficacy of 130 lumens per watt. The 140° beam angle produces wide, even coverage suitable for open canopy layouts and drive-through areas. The fixture operates on 100-277V input and maintains consistent performance across the full voltage range.

At the highest output, mounting heights between 10 and 18 feet are typical for uniform coverage in fueling areas and parking canopies. Excessive output may cause glare at lower mounting heights or in confined entry canopies. There is no integrated dimming; output is set at installation via the wattage selector.

Adjustability and Control Options

The fixture includes both wattage and color temperature adjustment, accessible during installation. This allows adaptation to site-specific requirements or future changes in lighting standards. The color temperature can be set to 3500K, 4000K, or 5000K, supporting a range of visual preferences and compliance needs.

No onboard dimming or motion control is provided. Output is fixed at the selected wattage. For sites requiring adaptive lighting or occupancy-based control, external systems must be used.

Longevity and Reliability

The fixture is rated for 50,000 hours (L70), supporting long-term operation in demanding exterior environments. The die-cast aluminum housing and polycarbonate lens provide resistance to impact and weather exposure. The IP65 rating ensures protection against dust and water jets, suitable for outdoor canopy and drive-through installations.

Operating temperature range is -4°F to 113°F. Performance and lifespan are maintained within this range; installations in locations with sustained higher temperatures may experience reduced longevity.

Build Quality and Physical Characteristics

The housing is constructed from die-cast aluminum with a white finish. The lens is polycarbonate for impact resistance and optical clarity. The fixture measures 9 inches square by 4.5 inches high and weighs 5 pounds, allowing for single-person handling during installation.

Surface and pendant mounting options are supported. All wiring is internal; no external cord is provided. The fixture is UL listed and IP65 rated for wet locations.

Where This Product Fits Best

This canopy light is intended for covered exterior environments requiring uniform, reliable illumination and moderate mounting heights. It is commonly installed in:

• gas station lighting
• fueling area lighting
• parking canopy lighting
• drive-through canopy lighting
• loading canopy lighting
• entry canopy lighting
• commercial overhang lighting
• covered walkway lighting

Environments with exposure to weather, vehicle emissions, and moderate temperature swings are supported. The fixture is not intended for hazardous locations or areas requiring high-abuse or vandal-resistant construction.

Installation and Long-Term Use

Surface and pendant mounting hardware is compatible with standard canopy structures. The compact size allows for direct replacement of legacy fixtures without extensive modification. All adjustments for wattage and color temperature are made at installation; no field-accessible controls are present after mounting.

Routine cleaning of the lens and inspection of mounting hardware are recommended for long-term performance. The fixture is designed for minimal maintenance, with no lamp or ballast replacements required over its rated life.

How This Fixture Is Commonly Used

Typical mounting heights range from 10 to 18 feet, depending on canopy clearance and required light levels. Fixtures are spaced to provide uniform coverage, with closer spacing in entry canopies or drive-throughs and wider spacing in open fueling areas. Layouts often follow existing canopy grid patterns for retrofit projects.

Higher output settings reduce the number of fixtures needed but may increase glare in low-ceiling or confined areas. Selection of color temperature and wattage should be coordinated with site requirements and visual comfort goals.

Safety, Certifications, and Warranty

This fixture is UL listed and IP65 rated. It is eligible for utility rebates where applicable. The product includes a 5-year warranty covering manufacturing defects and performance within rated specifications.

All electrical work must comply with local codes and be performed by qualified personnel. The fixture is suitable for wet locations and standard commercial canopy environments.

Frequently Asked Questions

Q: What is the recommended mounting height for this canopy light?

A: Typical mounting heights are 10 to 18 feet, depending on the selected wattage and required light levels.

Q: Can the color temperature be changed after installation?

A: Color temperature is adjustable during installation. Accessing the selector after mounting may require fixture removal.

Q: Is this fixture compatible with dimming controls?

A: No, this fixture does not support dimming. Output is set by the wattage selector at installation.

Q: What is the expected lifespan of the fixture?

A: The fixture is rated for 50,000 hours (L70) under normal operating conditions.

Q: Does the fixture include mounting hardware?

A: The fixture supports both surface and pendant mounting. Standard mounting hardware is included for these methods.

Q: How should fixtures be spaced for uniform coverage?

A: Spacing depends on mounting height and output setting. For 10?18 foot heights, typical spacing is 12?18 feet apart, adjusted for site layout and required light levels.

Application Questions and Clarification

Q: Is this canopy light suitable for use in parking garage ceilings?

A: This fixture is designed for covered exterior canopies. For enclosed parking garages, vapor tight fixtures may be more appropriate depending on site requirements.

Q: Can this fixture be used in hazardous locations or areas with explosive vapors?

A: No, this fixture is not rated for hazardous or classified locations. Use only in standard commercial canopy environments.

Q: Is the fixture appropriate for use in cold climates?

A: The fixture operates reliably down to -4°F. For environments colder than this, verify site conditions before specifying.

Q: Can this fixture be installed in a drive-through canopy with frequent vehicle exhaust exposure?

A: Yes, the fixture is IP65 rated and suitable for environments with vehicle emissions and weather exposure.