30 Watt LED Loading Dock Light | 4100 Lumens | 5000K | 100-277V | 40 Inch Reach With Swivel Head

Product Overview

This 30 watt LED loading dock light delivers 4100 lumens at 5000K with a 40-inch articulating arm and swivel head. The fixture replaces 150 watt metal halide dock lights and operates on 100-277V input, making it compatible with most commercial electrical systems.

The die-cast aluminum housing has a yellow powder coat finish for visibility in active dock environments. A gray fixture head sits at the end of the arm. The optic is tempered glass with a 110-degree beam angle, which spreads light across trailer interiors and dock plate areas without creating hard shadows at close range.

Output efficiency is 137 lumens per watt. CRI is 80+, which provides accurate color rendering for label reading and product inspection during loading operations.

Where This Product Fits Best

This fixture is built for wall-mounted installation at loading dock positions where an articulating arm is needed to direct light into trailers or containers. The 40-inch reach allows the head to extend past dock bumpers and into the trailer opening.

The swivel head adjusts to aim light where it is needed as trailer positions shift or loading activity moves. This is a single-output fixture with no dimming capability, so it is intended for areas where consistent full output is acceptable.

IP65 rating allows installation in dock areas exposed to wind-driven rain, dust, and temperature swings. The fixture is not submersible but handles the wash-down spray and weather exposure typical of exterior dock walls.

Performance and Functional Considerations

At 4100 lumens and 5000K, this fixture produces a daylight-equivalent output that makes it easier to read labels, identify product, and spot damage during loading. The 110-degree beam angle is wide enough to fill a trailer interior without requiring multiple fixtures per door.

Rated lifespan is 50,000 hours at L70, meaning output will remain above 70 percent of initial lumens through that period. At typical dock shift schedules, this translates to years of operation before noticeable lumen depreciation.

This fixture does not dim. It operates at full output whenever energized. If variable output is required for specific workflows or energy management, a different fixture should be considered.

Installation and Long-Term Use

Wall mounting is the intended installation method. The fixture weighs 25 pounds, so backing or blocking behind the mounting surface is necessary to support the load and the torque created when the arm is extended.

Voltage input is 100-277V at 50/60 Hz. No external driver or transformer is required for standard commercial dock circuits. Wiring should be completed by qualified personnel in accordance with local codes.

The tempered glass lens and powder-coated aluminum arm are designed to withstand incidental contact and dock environment exposure. Routine cleaning of the lens will maintain output, especially in dusty or high-particulate dock areas.

How This Fixture Is Commonly Used

Once installed, the arm is extended or retracted as needed to position the light head at or inside the trailer opening. The swivel head allows vertical and horizontal aiming adjustments without moving the arm itself.

Operators typically extend the arm after a trailer is docked and retract it before the trailer pulls away. The yellow powder coat finish on the arm improves visibility to forklift operators and dock personnel working in the area.

Because there is no dimming or switching control built into the fixture, on/off control is handled at the circuit or switch level. Facilities that want motion-based or occupancy-based control will need to add external switching upstream of the fixture.

Safety, Certifications, and Warranty

This fixture is UL listed. It is rebate eligible through applicable utility programs.

IP65 rating means the fixture is protected against dust ingress and low-pressure water jets from any direction. This covers rain, hose spray, and airborne particulate typical of dock environments.

LED Lighting Supply backs this fixture with a 5-year warranty.

Frequently Asked Questions

What does this fixture replace?
This 30 watt LED dock light replaces 150 watt metal halide fixtures.

What voltage does this fixture accept?
It operates on 100-277V input at 50/60 Hz.

Is this fixture dimmable?
No. This fixture operates at full output only and does not support dimming.

Is this fixture eligible for utility rebates?
Yes. This fixture is rebate eligible.

What is the warranty?
This fixture includes a 5-year warranty from LED Lighting Supply.

Can this fixture be used outdoors?
Yes. The IP65 rating supports outdoor installation in exposed dock wall locations.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.