20 / 25 / 30 Wattage Adjustable 2X2 LED Backlit Panel Light | 2500 to 3750 Lumens | 3500K / 4000K / 5000K Adjustable | 100-277V | Built-in Motion Sensor | 2 Pack

Product Overview

This is a 2x2 LED backlit panel light with selectable wattage and color temperature, designed for drop ceiling and surface-mount grid installations. The fixture is suitable for replacing traditional fluorescent troffers in commercial and institutional settings. Typical mounting heights range from 8 to 12 feet, commonly found in offices, classrooms, and healthcare facilities.

Each fixture includes a built-in motion sensor for occupancy-based control. The panel is supplied in a pack of two and supports recessed, chain-cable, or surface mounting options for flexibility during installation.

Core Performance and Output

This panel delivers selectable output at 20, 25, or 30 watts, producing 2500, 3125, or 3750 lumens respectively. The fixture achieves 125 lumens per watt and provides a uniform 110° beam distribution suitable for low to mid-height ceilings. Color temperature can be set to 3500K, 4000K, or 5000K as needed for the application.

0-10V dimming is standard, allowing for integration with common lighting control systems. Excessive output may occur if used in small rooms or at mounting heights below 8 feet. Uniformity may decrease if spacing exceeds typical grid patterns or if installed in non-standard ceiling layouts.

Adjustability and Control Options

Wattage and color temperature are field-selectable via onboard switches, supporting adaptation to changing requirements or energy targets. The integrated motion sensor enables occupancy-based operation without additional wiring or external sensors.

0-10V dimming is compatible with most commercial dimming systems. The fixture supports multiple mounting methods, including recessed grid, surface, and chain-cable suspension, to accommodate a range of ceiling types and retrofit scenarios.

Longevity and Reliability

The panel is rated for 50,000 hours (L70) and uses an aluminum alloy housing for thermal management. The polycarbonate lens resists yellowing and impact in typical commercial environments. Operating temperature range is -4°F to 122°F, suitable for conditioned interior spaces.

All components are designed for long-term use in office, educational, and healthcare settings. The fixture is covered by a 5-year warranty.

Build Quality and Physical Characteristics

The fixture measures 23.75 x 23.75 x 1.25 inches and weighs 4.5 lbs. The low-profile design allows for installation in shallow plenum spaces. The white finish matches standard ceiling grids and tiles.

The housing is constructed from aluminum alloy for rigidity and heat dissipation. The polycarbonate lens provides even light distribution and protects the LED array. All mounting hardware is compatible with standard 2x2 grid systems and surface-mount kits.

Where This Product Fits Best

This panel is intended for use in conditioned interior environments with standard drop ceilings or compatible surface-mount systems. It is most often installed in spaces requiring uniform, low-glare illumination and flexible control options.

• office lighting
• commercial interior lighting
• healthcare facility lighting
• educational facility lighting
• conference room lighting
• retail interior lighting
• corridor lighting
• reception area lighting

Suitable for dry or conditioned spaces. Not intended for wet locations or environments with high dust or corrosive exposure.

Installation and Long-Term Use

The fixture is designed for quick installation in standard 2x2 grid ceilings. Surface and chain-cable mounting options are available for non-grid ceilings or retrofit projects. The lightweight construction simplifies handling and reduces strain during installation.

Wattage and color temperature can be set before or after installation. The integrated motion sensor requires no additional wiring. Routine cleaning of the lens and inspection of the sensor are recommended for optimal performance over time.

How This Fixture Is Commonly Used

Panels are typically installed in grid ceilings at 8?12 foot mounting heights, spaced according to ceiling tile layout. In open offices or classrooms, fixtures are distributed evenly to achieve uniform light levels. In corridors or reception areas, spacing may be reduced to increase illumination.

Higher wattage settings reduce the number of fixtures needed but may increase perceived brightness or glare in smaller rooms. Sensor settings can be adjusted to balance energy savings with occupant comfort.

Safety, Certifications, and Warranty

This fixture is UL listed and eligible for utility rebates where available. All electrical and optical components meet commercial safety standards. The product is covered by a 5-year warranty from the date of installation.

Refer to local codes for installation requirements. The fixture is suitable for use on 100-277V circuits and supports 50/60 Hz operation.

Frequently Asked Questions

Q: What is the maximum mounting height for effective illumination?

A: Typical mounting heights are 8 to 12 feet. Output and uniformity may decrease at higher elevations.

Q: Can the motion sensor be disabled if not needed?

A: The integrated motion sensor can be adjusted or bypassed as required during installation.

Q: Is this panel compatible with surface-mount ceiling systems?

A: Yes, surface-mount and chain-cable mounting options are supported in addition to recessed grid installation.

Q: How is wattage and color temperature adjusted?

A: Both settings are selectable via onboard switches accessible during installation or maintenance.

Q: What is the recommended fixture spacing for office layouts?

A: Panels are typically spaced according to the 2x2 ceiling grid. Adjust spacing based on target light levels and room geometry.

Application Questions and Clarification

Q: Is this fixture suitable for use in healthcare patient rooms?

A: Yes, the panel is commonly installed in healthcare facility lighting, including patient rooms and exam areas.

Q: Can this panel be used in corridors or reception areas?

A: The fixture is suitable for corridor lighting and reception area lighting in commercial and institutional buildings.

Q: Is this panel appropriate for retail interior lighting?

A: Yes, it is frequently used in retail interior lighting applications where uniform, low-glare illumination is required.

Q: Is this fixture intended for wet or outdoor locations?

A: No, this panel is designed for dry, conditioned interior spaces only.