20 / 25 / 30 Wattage Adjustable LED Backlit Panel Light | 2500 to 3750 Lumens | 3500K / 4000K / 5000K Adjustable | 100-277V | Emergency Battery Backup | 2 Pack

This product is sold in packs of 2.

Product Overview

This is a wattage and color temperature adjustable LED backlit panel designed for drop ceiling and surface-mount grid installations. The fixture delivers selectable output from 2500 to 3750 lumens and is intended as a direct replacement for traditional fluorescent troffers in commercial interiors. Typical mounting is recessed in T-bar ceilings, with optional chain-cable or surface mounting for retrofit or non-standard grid applications.

The panel is suitable for office, healthcare, and educational environments where uniform, low-glare illumination is required. Emergency battery backup is integrated for code compliance and egress support during power loss.

Core Performance and Output

Selectable wattage settings of 20, 25, or 30 watts provide three output levels: 2500, 3125, or 3750 lumens. The fixture operates at 125 lumens per watt and supports 1-10V dimming for step or continuous control. The 110° beam angle and polycarbonate lens deliver wide, even distribution suitable for standard ceiling heights.

Color temperature can be set to 3500K, 4000K, or 5000K to match existing lighting or meet occupant preference. Output is best suited for mounting heights between 8 and 12 feet. Excessive output may occur at lower ceiling heights, requiring dimming or lower wattage selection to avoid over-lighting.

Adjustability and Control Options

Both wattage and color temperature are field adjustable via onboard switches, allowing adaptation to changing space requirements or retrofit conditions. The fixture supports 1-10V dimming for integration with standard commercial dimming systems.

Emergency battery backup is included for automatic operation during power loss. No additional external controls are required for basic operation, but compatibility with advanced controls depends on the dimming system in use.

Longevity and Reliability

Rated for 100,000 hours (L70), the panel is designed for long-term operation in commercial settings. The aluminum alloy housing and polycarbonate lens provide durability for daily use and routine cleaning.

Operating temperature range is -4°F to 122°F, covering typical conditioned interior environments. The fixture is UL listed and covered by a 5-year warranty.

Build Quality and Physical Characteristics

The fixture measures 23.8 x 23.8 x 2.5 inches and weighs 6.8 lbs. The low-profile design fits standard 2x2 grid ceilings and allows for surface or suspended mounting using optional accessories.

Housing is constructed from aluminum alloy with a white finish. The polycarbonate lens is impact resistant and provides uniform light diffusion. All components are designed for tool-less access during installation and maintenance.

Where This Product Fits Best

This panel is intended for use in conditioned commercial interiors where uniform, low-glare lighting is required. It is commonly installed in drop ceilings or surface-mounted in spaces with limited plenum depth.

• office lighting
• commercial interior lighting
• healthcare facility lighting
• educational facility lighting
• conference room lighting
• retail interior lighting
• corridor lighting
• reception area lighting

The fixture is suitable for dry or conditioned spaces. Not intended for wet locations or environments with high dust or corrosive exposure.

Installation and Long-Term Use

Standard installation is recessed into 2x2 T-bar grid ceilings. Surface and chain-cable mounting options are available for retrofit or non-standard ceilings. The fixture is lightweight and can be handled by one installer.

Wiring is accessible from the rear, with 100-277V input supporting most commercial electrical systems. Emergency battery backup is pre-installed and requires no additional wiring beyond standard AC and dimming connections.

Routine cleaning can be performed with non-abrasive materials. No relamping is required over the rated life. Field adjustability allows for changes in output or color temperature without fixture replacement.

How This Fixture Is Commonly Used

Panels are typically installed in grid ceilings at heights of 8 to 12 feet, spaced to achieve uniform illumination based on output setting and room size. Common layouts use 2x2 or 2x4 grid patterns, with spacing determined by target light levels and ceiling reflectance.

Higher output settings reduce the number of fixtures needed but may increase perceived brightness or glare in smaller rooms. Dimming and wattage adjustment allow for tuning after installation to balance energy use and occupant comfort.

Safety, Certifications, and Warranty

The fixture is UL listed. It is eligible for utility rebates where applicable. Emergency battery backup supports code compliance for egress lighting. All components are covered by a 5-year warranty.

No special maintenance is required beyond periodic cleaning and inspection. The fixture is designed for safe operation in standard commercial interiors.

Frequently Asked Questions

Q: What is the maximum mounting height for effective illumination?

A: The panel is designed for ceiling heights up to 12 feet. Output may be insufficient for higher ceilings.

Q: How is wattage and color temperature adjusted?

A: Both settings are adjusted via onboard switches accessible during installation or maintenance.

Q: Is the emergency battery backup included or optional?

A: Emergency battery backup is included and pre-installed in each fixture.

Q: Can this panel be surface mounted?

A: Yes, surface mounting is supported with optional accessories.

Q: What is the recommended fixture spacing for office applications?

A: Typical spacing is 6 to 10 feet on center, depending on output setting and target light levels.

Application Questions and Clarification

Q: Is this panel suitable for healthcare facility lighting?

A: Yes, the panel is commonly used in healthcare facilities for general and corridor lighting.

Q: Can this fixture be used in retail interior lighting?

A: Yes, it is suitable for retail interiors where uniform, low-glare lighting is required.

Q: Is this fixture appropriate for corridor lighting in educational facilities?

A: Yes, the panel is used in educational facility corridors and classrooms with standard ceiling heights.

Q: Is this panel rated for wet locations?

A: No, it is intended for dry or conditioned interior spaces only.