Need help choosing the right Product?
Get expert recommendations and a custom lighting plan within 1 day! Get Product Recommendations ➜
5 Watt Emergency Light and Exit Sign | 90 Minute Battery Backup | Black | Red Lettering
214 in stock
This 5 watt emergency light and exit sign combination is a practical choice for commercial and industrial spaces needing both exit identification and emergency egress lighting from a single surface-mounted fixture. Its 100V-277V universal voltage input simplifies installation across varied electrical systems, while the 90-minute battery backup meets standard emergency requirements. The thermoplastic ABS housing resists UV discoloration, making it suitable for areas with ambient or natural light. Adjustable LED heads provide broad 120-degree coverage, and the 50,000-hour lifespan reduces maintenance. This fixture is ideal for exit doorways, stairwell entries, and corridor intersections.
Dwayne Kula | President, CTO and Founder
Product Description
Key Features
- Watts: 5
- Replaces: 36W CFL
- Voltage: 100V-277V
- Dimming: No
- Beam Angles (Alt): 120°
- Lifespan: 50,000 hours
- Mounting: Surface
- Fixture Color: Black
- Frequency: 50-60Hz
- Power Factor: > .90
- THD: < 20%
Durable Construction
- Housing: Injection-Molded Thermoplastic ABS
- Certifications: UL
- Warranty: 3 years
Measurements
- Dimensions: 12 X 7.5 X 4.4
Request IES Files
Web ID: 2581
Product Overview
This is a 5 watt LED fixture designed as a direct replacement for 36W CFL units. It operates on 100V-277V input and is built for surface mounting applications.
The fixture uses an injection-molded thermoplastic ABS housing and is finished in black. It is rated for a 50,000 hour lifespan and supports 50-60Hz operation.
The beam angle is 120°, providing wide light distribution. The fixture measures 12 inches by 7.5 inches by 4.4 inches.
This unit is non-dimmable and has a power factor greater than 0.90 with total harmonic distortion under 20%.
Where This Product Fits Best
This fixture is suited for locations where a compact, low-wattage LED is needed to replace legacy 36W CFL units. It is compatible with 100V-277V electrical systems.
Surface mounting allows installation on flat ceilings or walls. The ABS housing is appropriate for indoor environments where durability and impact resistance are required.
Common applications include corridors, utility rooms, storage areas, and other spaces where general illumination is needed without dimming capability.
Performance and Functional Considerations
The 5 watt output provides energy-efficient operation compared to traditional CFL fixtures. The 120° beam angle delivers broad, even coverage in the installed area.
The fixture maintains a power factor above 0.90 and total harmonic distortion below 20%, supporting stable operation on commercial and industrial electrical systems.
With a 50,000 hour rated lifespan, this unit is designed for long-term use with minimal maintenance requirements.
Dimming is not supported. The fixture operates at full output when powered.
Installation and Long-Term Use
This fixture is intended for surface mounting. The injection-molded thermoplastic ABS housing provides impact resistance and durability during and after installation.
It is compatible with 100V-277V circuits, allowing use in a range of commercial and industrial settings. The fixture's compact size supports installation in tight or low-clearance locations.
Routine maintenance is limited to periodic cleaning and inspection. No lamp replacement is required over the rated lifespan.
The black finish is suitable for environments where a low-profile appearance is preferred.
How This Fixture Is Commonly Used
After installation, this fixture provides consistent, wide-area illumination for general tasks and wayfinding. The 120° beam angle reduces shadowing and helps cover larger areas from a single mounting point.
Once installed, there are no user adjustments or controls. The fixture operates at full brightness whenever powered.
Facility staff can rely on the long service life to minimize disruptions from fixture failures or lamp changes. The ABS housing stands up to routine impacts and cleaning.
In day-to-day use, the fixture blends into the background while providing reliable light output for corridors, storage rooms, and similar spaces.
Safety, Certifications, and Warranty
This fixture is UL listed.
The housing is constructed from injection-molded thermoplastic ABS for impact resistance.
LED Lighting Supply provides a 3 year warranty on this fixture.
Frequently Asked Questions
What voltage does this fixture support?
This fixture operates on 100V-277V.
Is this fixture dimmable?
No, this fixture does not support dimming.
What is the rated lifespan?
The rated lifespan is 50,000 hours.
What certifications does this fixture carry?
This fixture is UL listed.
What is the mounting method?
This fixture is designed for surface mounting.
What is the warranty period?
LED Lighting Supply provides a 3 year warranty.
Application Questions and Clarification
This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.
