4 Watt LED Exit Sign | 120 Minute Battery Backup | New York City Approved

Product Overview

This is an LED Emergency Exit Sign with a 120-minute emergency backup. The fixture operates at 4 watts and is compatible with 100V-277V input. It is designed for use on 50-60Hz electrical systems.

The housing is constructed from aluminum and finished in white. The fixture measures 14 inches by 10.5 inches by 2 inches and weighs 3.5 lbs. It is New York City approved, damp location rated, and fire-resistant.

This exit sign is surface or wall mountable and does not support dimming. The power factor is greater than 0.90, and total harmonic distortion is less than 20%.

The fixture is UL listed and wet location rated. It carries a 2-year warranty and is rated for a 50,000-hour lifespan.

Where This Product Fits Best

This emergency exit sign is suitable for commercial and industrial spaces that require clear egress marking and emergency backup operation. It is appropriate for use in environments where wet or damp conditions may be present.

Common applications include warehouses, manufacturing facilities, distribution centers, and other properties where New York City approval and fire resistance are required. The fixture is designed for both indoor and outdoor covered locations where wet location ratings are necessary.

Surface or wall mounting options allow for flexible placement in corridors, stairwells, and exit pathways. The white finish supports use in a range of facility aesthetics.

Performance and Functional Considerations

The fixture operates at 4 watts and supports input voltages from 100V to 277V. It is not dimmable and is intended for continuous operation with emergency backup capability.

The 120-minute emergency backup provides extended illumination during power loss. The power factor above 0.90 and THD below 20% support efficient operation on commercial electrical systems.

The aluminum housing and fire-resistant construction contribute to durability in demanding environments. Wet location and damp location ratings allow installation in areas exposed to moisture or humidity.

The fixture's 50,000-hour rated lifespan supports long-term use with minimal maintenance requirements.

Installation and Long-Term Use

This exit sign is designed for surface or wall mounting. The compact dimensions and 3.5 lb weight allow for straightforward handling during installation.

The fixture is compatible with 100V-277V electrical systems operating at 50-60Hz. No dimming capability is provided, so installation should be planned for standard on/off operation.

Aluminum construction and fire-resistant materials support long-term durability. Wet location and damp location ratings allow for installation in areas subject to moisture, such as loading docks, stairwells, or exterior egress points under cover.

The 2-year warranty and 50,000-hour rated lifespan support extended service intervals and reduced maintenance demands.

How This Fixture Is Commonly Used

After installation, this fixture provides continuous exit marking and automatically switches to emergency backup mode during power loss. The 120-minute backup duration supports safe egress in extended outage scenarios.

Surface or wall mounting allows you to position the sign for maximum visibility along exit routes. The white finish blends with most facility interiors and exteriors.

Routine inspection and periodic testing are typically performed as part of facility safety protocols. The fire-resistant and wet location rated construction allows the fixture to remain in place in areas exposed to moisture or humidity without additional protection.

Once installed, the fixture operates without user adjustment. Maintenance is limited to periodic checks and cleaning as required by facility safety standards.

Safety, Certifications, and Warranty

This fixture is UL listed. It is New York City approved and fire-resistant.

The fixture is wet location rated and damp location rated. It is designed for use in environments where exposure to moisture is possible.

LED Lighting Supply provides a 2-year warranty on this fixture.

Frequently Asked Questions

What input voltage does this fixture support?
This fixture operates on 100V-277V input.

Is this fixture dimmable?
No, this fixture does not support dimming.

What is the emergency backup duration?
The fixture provides 120 minutes of emergency backup operation.

What certifications does this fixture carry?
This fixture is UL listed and New York City approved.

What is the environmental rating?
The fixture is wet location rated and damp location rated.

What is the warranty period?
LED Lighting Supply provides a 2-year warranty.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.