4 Watt LED Emergency Light | 90 Minute Battery Backup
Dwayne Kula | President, CTO and Founder
1271 in stock
Product Specifications
Key Features
| Brand | LED Lighting Supply |
| Watts | 4 |
| Lumens | 300 |
| Lumens Per Watt | 75 |
| Voltage | 100V-277V |
| Dimming | No |
| Beam Angles (Std) | 120° |
| Lifespan | 50,000 hours |
| Mounting | Wall |
| Fixture Color | White |
| Frequency (Hz) | 50/60 |
| Power Factor | .97 |
| THD | < 20% |
Durable Construction
| Housing | Injection-Molded Thermoplastic ABS |
| Certifications | ETL |
| Warranty | 3 years |
Measurements
| Dimensions (in) | 11 X 4.5 X 2.5 |
| Weight (lbs) | 19.6 lbs |
4 Watt Emergency Exit LED Light produces 300 lumens for up to 90 minutes. LED heads are adjustable, so you can aim and point for optimal light distribution.
Product Overview
This 4-watt LED emergency light provides 300 lumens of battery-backed illumination for egress lighting, emergency exit lighting, code compliance lighting, and life safety lighting.
The white thermoplastic ABS fixture mounts to a wall and uses adjustable LED heads to direct emergency light where it is needed. It operates for up to 90 minutes during an emergency condition.
Core Performance and Output
The fixture produces 300 lumens at 4 watts, or 75 lumens per watt. Adjustable heads use a standard 120-degree beam angle.
It operates on 100-277V, 50/60 Hz power with a 0.97 power factor and less than 20 percent THD. The 300-lumen output is intended for localized emergency illumination rather than broad-area lighting.
Adjustability and Control Options
Two adjustable LED heads allow light direction to be set during installation. Head position should be checked after final wall mounting to confirm the intended emergency coverage path.
This emergency light is not dimmable. It operates as an emergency lighting fixture with 90-minute battery backup operation.
Longevity and Reliability
The LED light source is rated for 50,000 hours of service life. Long LED life reduces routine lamp replacement requirements.
The fixture provides up to 90 minutes of emergency operation. Periodic emergency-operation testing remains necessary to confirm battery-backed performance.
Build Quality and Physical Characteristics
The housing is injection-molded thermoplastic ABS with a white finish. The fixture measures 11 x 4.5 x 2.5 inches.
Fixture weight is listed at 19.6 pounds. Wall mounting must be secured to a suitable mounting surface.
Where This Product Fits Best
This emergency light fits interior locations requiring battery-backed illumination during a loss of normal power. It is intended for life safety and emergency egress functions.
- emergency exit lighting
- egress lighting
- life safety lighting
- code compliance lighting
- commercial building exit marking
- industrial facility exit lighting
- warehouse exit lighting
Wall mounting and adjustable heads support targeted light direction along designated emergency travel paths. Final placement depends on the building layout and applicable code requirements.
Installation and Long-Term Use
The fixture mounts on a wall and accepts 100-277V input power. Confirm the mounting surface supports the fixture before installation.
Adjust both LED heads after mounting and electrical connection. Emergency operation should be checked as part of the facility’s life safety maintenance process.
How This Fixture Is Commonly Used
In egress lighting and emergency exit lighting layouts, the fixture is wall-mounted where adjustable heads can direct light along the required path. Mounting height is determined by the wall location, path geometry, and head aiming requirements.
Placement follows the emergency travel route rather than a general lighting pattern. Spacing and fixture count depend on the layout and required emergency illumination conditions, and the supplied data does not establish a fixed spacing value.
Safety, Certifications, and Warranty
This emergency light is ETL listed.
The fixture includes a 3-year warranty. It provides up to 90 minutes of battery-backed operation.
Frequently Asked Questions
Q: What is the emergency light output?
A: This fixture produces 300 lumens at 4 watts.
Q: What input voltage does this emergency light accept?
A: It operates on 100-277V, 50/60 Hz input power.
Q: Can the LED heads be adjusted?
A: Yes. The LED heads are adjustable for directional emergency light distribution.
Q: How long does the battery backup operate?
A: The fixture provides up to 90 minutes of emergency operation.
Q: Is this fixture dimmable?
A: No. This emergency light is not dimmable.
Application Questions and Clarification
Q: Is this fixture appropriate for emergency exit lighting?
A: Yes. Emergency exit lighting is a listed application for this product family.
Q: What should be considered when planning fixture placement for egress lighting?
A: Wall location, emergency travel path layout, and adjustable head direction affect placement. The supplied product data does not establish a fixed mounting height or spacing value.
Q: Can this fixture be used for warehouse exit lighting?
A: Warehouse exit lighting is a listed secondary application for this product family. The fixture provides 300 lumens with adjustable LED heads and up to 90 minutes of emergency operation.
Web ID: 2053