3 Watt LED Exit Sign | 90 Minute Battery Backup

Product Overview

This 3 Watt LED Exit Sign is designed for code-compliant egress and emergency exit marking in commercial and industrial facilities. It provides clear, illuminated exit signage with a 90-minute battery backup for uninterrupted operation during power loss. Typical installations include corridors, stairwells, and exit pathways in office buildings, warehouses, and public facilities where reliable exit identification is required.

The fixture operates on 100-277V input and delivers consistent 5000K illumination. Its compact, surface-mounted form factor and injection-molded thermoplastic ABS housing support straightforward installation and long-term durability in standard indoor environments.

Core Performance and Output

This exit sign uses a 3-watt LED light source to provide uniform, high-visibility exit illumination. The fixture is engineered for clear legibility in both normal and emergency modes, meeting egress lighting requirements. Power factor exceeds 0.90, and total harmonic distortion is below 20% for stable electrical performance.

The 90-minute battery backup ensures continued operation during outages. Output is optimized for typical corridor and exit pathway mounting heights; excessive brightness is not a concern in standard applications. The fixture is not intended for outdoor or wet locations.

Adjustability and Control Options

This exit sign is a fixed-output unit with no dimming or advanced control features. It is designed for continuous operation with automatic emergency mode activation upon power loss. No field-adjustable settings are provided.

Directional chevrons and faceplate configuration may be set during installation to match the required egress path. No remote testing or network integration is available on this model.

Longevity and Reliability

The LED light source is rated for 50,000 hours of operation, supporting long-term reliability with minimal maintenance. The integrated battery backup is designed for repeated charge/discharge cycles and meets standard emergency lighting requirements.

Routine inspection and periodic battery testing are recommended to ensure ongoing code compliance. The fixture is covered by a 2-year warranty for defects in materials and workmanship.

Build Quality and Physical Characteristics

The housing is constructed from injection-molded thermoplastic ABS, providing impact resistance and durability in typical indoor environments. The fixture is finished in white and measures 12 x 7.5 x 4.4 inches, supporting surface mounting on walls or ceilings.

All components are UL certified. The design is non-metallic and corrosion-resistant for standard commercial and institutional use. The fixture is not rated for wet or hazardous locations.

Where This Product Fits Best

This LED exit sign is intended for indoor environments where code-compliant exit marking and emergency egress lighting are required. It is suitable for new construction and retrofit projects in commercial, industrial, and public buildings.

• egress lighting
• emergency exit lighting
• code compliance lighting
• life safety lighting
• commercial building exit marking
• industrial facility exit lighting
• warehouse exit lighting
• public building exit lighting

Typical installation areas include corridors, stairwells, and exit doors in office buildings, warehouses, manufacturing plants, and public facilities. The fixture is intended for dry, indoor locations only.

Installation and Long-Term Use

This exit sign is designed for surface mounting on walls or ceilings using standard hardware. The lightweight ABS housing simplifies handling and installation. Electrical connections accommodate 100-277V input, supporting a wide range of building wiring systems.

Battery backup is integrated and requires periodic testing per code requirements. Routine maintenance is limited to visual inspection and battery checks. The fixture is not suitable for wet locations or environments with high dust or corrosive exposure.

How This Fixture Is Commonly Used

Exit signs are typically installed above exit doors, at corridor intersections, and along egress routes at mounting heights between 7 and 10 feet. Spacing is determined by line-of-sight requirements and local code, with additional units placed as needed for visibility around corners or in large open areas.

Battery backup ensures operation during power loss, supporting safe evacuation. In some layouts, fixture count may increase to maintain visibility in complex floor plans or where obstructions limit sightlines.

Safety, Certifications, and Warranty

This fixture is UL certified for exit sign applications. It meets standard life safety and emergency egress requirements for commercial and industrial buildings. The housing is constructed from flame-retardant thermoplastic ABS for added safety.

A 2-year warranty covers defects in materials and workmanship. The fixture is designed to support code compliance in regulated environments.

Frequently Asked Questions

Q: What is the battery backup duration for this exit sign?

A: The integrated battery provides 90 minutes of emergency illumination during power loss.

Q: Can this exit sign be installed outdoors or in wet locations?

A: No, this fixture is intended for dry, indoor environments only.

Q: What mounting options are available?

A: The fixture is designed for surface mounting on walls or ceilings.

Q: Is the faceplate field-configurable for directional arrows?

A: Yes, directional chevrons can be set during installation to indicate the egress path.

Q: How often should the battery be tested?

A: Battery testing should follow local code requirements, typically monthly and annually.

Q: How many exit signs are needed for a typical corridor?

A: Fixture count depends on corridor length, layout, and code requirements; spacing is based on visibility and line-of-sight to exits.

Application Questions and Clarification

Q: Is this exit sign suitable for warehouse exit lighting?

A: Yes, this fixture is commonly used for marking exits in warehouse environments.

Q: Can this fixture be used for code compliance lighting in public buildings?

A: Yes, it meets code compliance requirements for exit marking in public facilities.

Q: Is this product appropriate for industrial facility exit lighting?

A: Yes, it is suitable for industrial facility exit and egress lighting applications.

Q: Does this exit sign provide life safety lighting during emergencies?

A: Yes, the integrated battery backup supports life safety lighting during power outages.