150 Watt LED Shoebox Area Light | 19500 Lumens | 5000K | 100-277V or 277-480V | White

Product Overview

This 150 watt LED shoebox area light delivers 19,500 lumens at 5000K color temperature, replacing 400 watt metal halide fixtures in parking lots, roadways, and general outdoor area lighting applications. The fixture operates at 130 lumens per watt with a CRI of 70+ and is available in either 100-277V or 277-480V configurations.

The die-cast aluminum housing is finished in white and measures 20.19 inches long by 13.11 inches wide by 6.61 inches high. Total fixture weight is 12 pounds. A polycarbonate lens protects the LED array, and the fixture carries a Type 3 beam distribution for roadway-style forward throw patterns.

Mounting options include arm mount or slip fitter, allowing installation on round poles or square arms depending on site hardware. The EPA rating of 1.3 defines the wind load profile for pole and foundation calculations.

Where This Product Fits Best

This fixture is suited for outdoor area lighting where a 400 watt metal halide is currently in use or specified. Typical mounting locations include parking lot poles, roadway lighting standards, and perimeter security poles around commercial and industrial properties.

The 100-277V version covers most commercial service voltages, while the 277-480V version supports industrial three-phase systems and utility-fed pole circuits. Site voltage must be confirmed before selecting the appropriate configuration.

With an operating temperature range of -40 degrees F to 113 degrees F, the fixture is appropriate for cold-storage exterior doors, northern climate parking areas, and hot rooftop or desert installations within that span.

Performance and Functional Considerations

At 19,500 lumens and 150 watts, this fixture provides a direct replacement path for 400 watt metal halide systems. The 5000K color temperature produces a cool white output consistent with most commercial parking and roadway standards.

Type 3 optics direct light forward and to the sides in a rectangular pattern, intended for roadway and parking row applications where pole spacing follows a linear path. This distribution minimizes backlight behind the pole while pushing light toward the target area.

The fixture supports 1-10V dimming, allowing integration with external dimming controls or building management systems where adjustable output is required. Power factor is 0.9 and total harmonic distortion is 15 percent, meeting typical utility and facility electrical standards.

Installation and Long-Term Use

The fixture accepts either arm mount or slip fitter hardware. Slip fitter installation slides over a standard round tenon, while arm mount brackets attach to square pole arms. Confirm your pole top configuration before installation.

IP65 rating allows exposure to rain, snow, and hose-directed water without ingress to internal components. The fixture is suitable for installations where direct weather exposure is expected year-round.

Rated lifespan is 50,000 hours at L70, meaning the fixture will maintain at least 70 percent of initial lumen output through that operating period. This represents approximately 11 years of operation at 12 hours per night.

How This Fixture Is Commonly Used

Facilities typically use this fixture to replace aging metal halide parking lot lights on a one-for-one basis. The slip fitter or arm mount options allow reuse of existing poles without structural modification in most cases.

The 1-10V dimming input allows connection to photocells with dimming output, external timers, or building automation systems. Where dimming is not required, the fixture operates at full output without additional wiring.

The white housing finish is commonly selected for retail, hospitality, and campus environments where pole and fixture aesthetics are part of the site standard. For industrial or less visible applications, confirm that white matches your site finish requirements.

Safety, Certifications, and Warranty

This fixture is UL listed and rebate eligible. The 5-year warranty covers defects in materials and workmanship under normal operating conditions.

The IP65 rating confirms the fixture is protected against dust ingress and water jets from any direction. This allows installation in exposed locations without supplemental weatherproofing.

Frequently Asked Questions

What metal halide wattage does this fixture replace?
This fixture replaces 400 watt metal halide area lights.

What voltage options are available?
The fixture is available in 100-277V or 277-480V configurations. Verify your site voltage before ordering.

Is this fixture eligible for utility rebates?
Yes, this fixture is rebate eligible. Check with your local utility for specific program requirements.

What mounting options does this fixture support?
The fixture supports arm mount and slip fitter mounting for installation on standard pole configurations.

What is the warranty period?
This fixture includes a 5-year warranty.

Can this fixture be dimmed?
Yes, the fixture supports 1-10V dimming when connected to a compatible control device.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.