30 / 40 / 60 Watt Adjustable Canopy Light | 3900 to 7800 Lumens | 5000K | 100-277V | Optional Integrated Motion Sensor

Product Overview

This adjustable canopy light operates at 30, 40, or 60 watts with corresponding lumen outputs of 3900, 5200, or 7800 lumens. All three output levels maintain 130 lumens per watt efficiency. The fixture replaces 250-watt metal halide canopy lights and operates on 100-277V input at 50-60Hz.

The housing is die-cast aluminum with a white finish. Overall dimensions are 12.2 inches in diameter by 5.5 inches in height, with a weight of 6.5 pounds. Color temperature is fixed at 5000K with a CRI of 70 or higher. The beam angle is 140 degrees.

This fixture is available with or without an integrated motion sensor. It does not support dimming.

Where This Product Fits Best

This canopy light is built for covered outdoor areas and semi-exposed locations where a downward-facing fixture is mounted to a flat surface or suspended by pendant. Gas station canopies, parking garage ceilings, building overhangs, loading dock covers, and covered walkways are typical mounting locations.

The IP65 rating allows installation where the fixture will be exposed to rain, hose-down, dust, and airborne debris. Operating temperature range of -40 degrees F to 113 degrees F supports year-round outdoor use in most climates. The 140-degree beam angle provides broad, even coverage directly below the fixture.

Performance and Functional Considerations

Wattage is adjustable between 30, 40, and 60 watts, allowing the output to be set based on what the application requires. At the lowest setting, the fixture produces 3900 lumens. At the highest, it delivers 7800 lumens. This range covers a variety of canopy sizes and mounting heights without requiring different fixture models.

The 5000K color temperature produces a neutral white light appropriate for security visibility and general outdoor illumination. Power factor exceeds 0.90 and total harmonic distortion is below 20 percent.

Rated lifespan is 50,000 hours at L70, meaning the fixture will retain at least 70 percent of its initial lumen output at that point.

Installation and Long-Term Use

The fixture mounts by pendant or surface. Pendant mounting uses the threaded hub on top of the housing. Surface mounting attaches the fixture directly to a flat canopy structure or ceiling. Weight is 6.5 pounds, which most standard canopy junction boxes and mounting hardware will support.

Voltage input accepts 100-277V, covering standard commercial electrical systems without requiring a separate transformer or driver. The die-cast aluminum housing and IP65 sealing reduce long-term maintenance concerns in exposed locations.

Operating temperature tolerance down to -40 degrees F eliminates cold-start issues in freezing climates. Upper limit of 113 degrees F accommodates typical summer conditions in covered but unventilated spaces.

How This Fixture Is Commonly Used

After installation, the wattage selector allows the installer or facility operator to set the output level that best fits the space. A smaller canopy or lower mounting height may only need the 30-watt setting. A larger coverage area or higher mounting height benefits from the 60-watt output. The selection is made once and does not require ongoing adjustment.

The 140-degree beam angle spreads light broadly beneath the fixture, which works well for general canopy illumination without needing multiple overlapping fixtures in tighter spacing. In fueling areas, loading zones, and pedestrian walkways, this spread provides consistent light levels across the covered footprint.

The optional motion sensor is available for applications where occupancy-based control is preferred. When selected, the sensor is integrated into the fixture housing.

Safety, Certifications, and Warranty

This fixture is UL listed. It is rebate eligible through applicable utility programs.

The IP65 rating means the fixture is protected against dust ingress and water projected from a nozzle in any direction. This supports installation in locations subject to weather exposure, pressure washing, or industrial dust.

We back this fixture with a 5-year warranty.

Frequently Asked Questions

What wattage options are available?
The fixture is adjustable to 30, 40, or 60 watts. Output levels are 3900, 5200, or 7800 lumens respectively.

What voltage does this fixture require?
It operates on 100-277V input at 50-60Hz.

Is this fixture rated for wet or outdoor locations?
Yes. The IP65 rating allows use in areas exposed to rain, dust, and direct water spray.

What does this fixture replace?
It is designed to replace 250-watt metal halide canopy lights.

Is this fixture eligible for utility rebates?
Yes. This fixture is rebate eligible.

What is the warranty?
We provide a 5-year warranty on this fixture.

Can this fixture be dimmed?
No. This fixture does not support dimming.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.