380 / 400 / 450 Watt Adjustable LED Shoebox Area Light | 50500 to 60000 Lumens | Type 3 | 5000K | 120-277V
Dwayne Kula | President, CTO and Founder
81 in stock
Product Specifications
Key Features
| Brand | LED Lighting Supply |
| Watts | 380 | 400 | 450 |
| Lumens | 50500 | 53000 | 60000 |
| Lumens Per Watt | 130 |
| Replaces | 1000 or 1500 Watt Metal Halide |
| Voltage | 120V-277V |
| Color Temperature | 5000K |
| CRI | 80+ |
| Dimming | 0-10V |
| Beam Angles (Std) | Type 3 |
| Optics | Polycarbonate Lens |
| Lifespan | 50,000 (L70) hours |
| Mounting | Arm or Slip Fitter or Trunnion |
| EPA Rating | 2.5 |
| Fixture Color | Bronze |
| Frequency (Hz) | 50/60 |
| Power Factor | .9 |
Durable Construction
| Housing | Die-Cast Aluminum |
| IP Rating | IP65 |
| Operating Temperature | -4°F to 113°F |
| Certifications | UL | Rebate Eligible |
| Warranty | 5 years |
Measurements
| Dimensions (in) | 36 L X 13 W X 3.7 H |
| Weight (lbs) | 25 |
Shoebox Fixture Lighting Layout Estimator
Use this estimator to calculate approximate fixture count, pole placement, spacing, and average foot-candles for parking lots, exterior areas, and outdoor sport court applications using the selected LED shoebox fixture. Enter the area size, mounting height, target foot-candles, light loss factor, and outdoor light use factor to generate a preliminary layout.
Project Inputs
Estimated Results
Estimated average foot-candles are preliminary. The visual heat map is normalized to the estimated average and is intended to show approximate coverage behavior, not a verified lighting plan.
Parking Lot / Exterior Area Mode: Fixtures are placed on poles along the longest edges of the area. Edge fixtures are modeled as level / down-facing shoebox fixtures with the optic directed inward. For wider parking areas, a center row can be added.
Sport Court Mode: Poles are placed on the long edges of the court. Fixtures are modeled as level / down-facing and directed toward court coverage zones instead of being tilted toward one center point.
Photometry / Simulation Note: When usable IES photometry is available for the selected fixture, this estimator uses the fixture’s IES candela data to improve the visual ground-level light distribution. When IES photometry is not available, the estimator uses a simulated Type 3 or Type 5 optic model based on lumens, mounting height, outdoor light use factor, light loss factor, and fixture direction.
Outdoor Light Use Factor: Suggested starting points: open rectangular paved area 0.60–0.70, typical parking lot 0.45–0.60, areas with setbacks or edge losses 0.35–0.50, complex outdoor sites 0.25–0.40.
Preliminary Estimate Only: This estimator is intended for simple rectangular outdoor areas. Actual light levels may vary based on fixture optics, pole setbacks, mounting height, fixture orientation, distribution type, surface reflectance, obstructions, voltage, installation conditions, spill light requirements, and site-specific requirements.
This estimate is a starting point. Parking lots, roadways, sport courts, public areas, campuses, vehicle areas, and code-sensitive exterior projects should be reviewed with a lighting plan before purchase or installation.
Product Overview
This adjustable LED shoebox area light provides 380W, 400W, or 450W output with Type 3 distribution for exterior site lighting. It is built for high-output parking lot lighting, area lighting, commercial site lighting, and roadway perimeter lighting.
The fixture produces 5000K light through a polycarbonate lens and uses a bronze die-cast aluminum housing. Arm, slip fitter, and trunnion mounting options support common pole and structural mounting configurations.
This output range is commonly used where older 1000W or 1500W metal halide fixtures are being replaced with LED area lighting.
Core Performance and Output
The selectable 380W, 400W, and 450W settings produce 50,500, 53,000, and 60,000 lumens. Fixture efficacy is 130 lumens per watt.
Type 3 optics provide an elongated forward distribution suited to site and perimeter layouts. The 5000K color temperature and 80+ CRI support visibility across broad exterior areas.
The fixture operates on 120V-277V, 50/60 Hz power and has a 0.9 power factor. Output at 60,000 lumens can be excessive where mounting height is low or where the illuminated area is limited.
Adjustability and Control Options
Output is adjustable between 380W, 400W, and 450W. This allows the fixture output to be aligned with the required light level and layout without changing the fixture housing.
0-10V dimming is included. Dimming control wiring and control compatibility must be confirmed as part of the installation design.
Longevity and Reliability
The LED system is rated for 50,000 L70 hours. L70 indicates the point at which light output is expected to reach 70 percent of initial output.
The operating temperature range is -4 degrees F to 113 degrees F. Long-term performance depends on maintaining the fixture within this temperature range and keeping the optical lens clear of accumulated debris.
Build Quality and Physical Characteristics
The housing is die-cast aluminum with a bronze finish. The fixture measures 36 inches long by 13 inches wide by 3.7 inches high and weighs 25 pounds.
An IP65 rating protects the enclosed fixture from dust and water exposure. The polycarbonate lens protects the Type 3 optical system.
Where This Product Fits Best
This fixture fits high-output exterior layouts where Type 3 forward throw is needed from arm, slip fitter, or trunnion mounting. Its output range is appropriate for larger parking and site coverage areas rather than small localized areas.
- parking lot lighting
- commercial site lighting
- roadway perimeter lighting
- area lighting
- industrial yard lighting
- campus lighting
- dealership lighting
The IP65 enclosure, die-cast aluminum housing, and -4 degrees F to 113 degrees F operating range support exposed exterior conditions within the listed operating limits. The 2.5 EPA rating must be considered with the mounting structure and local wind-load requirements.
Installation and Long-Term Use
Arm mounting, slip fitter mounting, and trunnion mounting allow the fixture to be matched to the available structure and aiming requirement. The mounting method should be selected before installation because each method changes fixture orientation and load transfer.
The 25-pound fixture weight and 2.5 EPA rating must be accounted for in the supporting pole, bracket, or structure. Electrical installation must match the 120V-277V input range and include 0-10V control wiring when dimming is used.
How This Fixture Is Commonly Used
For parking lot lighting, commercial site lighting, and industrial yard lighting, Type 3 optics are typically oriented to project light forward from the mounting location. Roadway perimeter lighting layouts use the same forward distribution to direct output along the intended perimeter path.
Mounting height, fixture orientation, and pole placement determine the usable light pattern. Higher output can reduce fixture count, but it can also increase glare and require more careful aiming.
Campus lighting and dealership lighting layouts should account for the selected wattage setting, Type 3 distribution, and available mounting configuration. Exact fixture spacing depends on mounting height, target light levels, and the final layout.
Safety, Certifications, and Warranty
This fixture is UL listed. It is rebate eligible.
The fixture has an IP65 rating and a 5-year warranty.
Frequently Asked Questions
Q: What output settings are available?
A: The fixture is adjustable to 380W, 400W, or 450W, producing 50,500, 53,000, or 60,000 lumens.
Q: What optical distribution does this shoebox light use?
A: This fixture uses Type 3 optics with a polycarbonate lens.
Q: Which mounting options are available?
A: The fixture is available with arm, slip fitter, or trunnion mounting.
Q: What should be considered when planning fixture layout?
A: Mounting height, target light levels, fixture orientation, and Type 3 distribution affect fixture layout. A specific spacing value is not established by the supplied product data.
Application Questions and Clarification
Q: Is this fixture suitable for parking lot lighting?
A: Parking lot lighting is a primary application for this shoebox light. The fixture provides 50,500 to 60,000 lumens with Type 3 distribution.
Q: What should be reviewed for industrial yard lighting?
A: Industrial yard lighting is a listed secondary application. The mounting structure must support the 25-pound fixture weight and 2.5 EPA rating.
Q: Can this fixture be dimmed for commercial site lighting?
A: Commercial site lighting is a primary application, and the fixture includes 0-10V dimming. Control wiring and compatibility must be confirmed for the installation.
Web ID: 2747