200 Watt LED Street Light | 32000 Lumens | 5000K | 100V-277V | Type 3 | Photocell Optional

Product Overview

This 200 watt LED street light delivers 32,000 lumens at 160 lumens per watt, replacing 400 to 1000 watt metal halide fixtures. The fixture operates on 100V-277V input at 50-60Hz and is available in 3000K, 4000K, or 5000K color temperatures with a CRI of 70+.

The standard optic is Type 3, with Type 2, Type 4, and Type 5 distributions available as options. Optics consist of tempered glass with a polycarbonate lens. The fixture supports 1-10V dimming and has an optional photocell for dusk-to-dawn operation.

Construction is aluminum alloy housing in black finish, measuring 27 inches long by 12 inches wide by 6.1 inches high and weighing 19.5 pounds. The EPA rating is 2.6, which factors into wind load calculations for pole selection.

Where This Product Fits Best

This fixture is sized for roadway, parking lot, and area lighting applications where 400 to 1000 watt metal halide fixtures are currently installed. The 32,000 lumen output and Type 3 distribution make it suitable for street lighting where light needs to be thrown perpendicular to the pole with minimal backlight.

Type 2, Type 4, and Type 5 optics extend the application range to narrower pathways, wider intersections, or symmetrical area coverage. The 100V-277V input handles standard commercial voltages found in municipal and private outdoor installations.

IP66 and IK09 ratings position this fixture for exposed outdoor locations where dust, rain, and physical contact are expected. The 5kV line-to-line and 10kV line-to-earth surge protection addresses electrical transients common in outdoor pole-mounted applications.

Performance and Functional Considerations

At 160 lumens per watt, this fixture produces the same or greater light output as legacy HID fixtures while drawing significantly less power. The 131,000-hour L70 lifespan means the fixture will maintain at least 70 percent of its initial output over that period under normal operating conditions.

The 1-10V dimming capability allows integration with external dimming controls or lighting management systems. When the optional photocell is installed, the fixture operates automatically based on ambient light levels without requiring a separate control circuit.

Color temperature selection affects how the light appears and how well it renders colors in the environment. 5000K produces a cooler, more bluish-white light, while 3000K produces a warmer appearance. The 70+ CRI is standard for outdoor area and roadway lighting.

Installation and Long-Term Use

This fixture mounts to a pole using a standard arm or direct pole-top configuration. At 19.5 pounds with an EPA of 2.6, pole and arm selection must account for the combined weight and wind load contribution. Existing poles supporting comparable HID fixtures should be evaluated for compatibility.

The aluminum alloy housing resists corrosion and manages heat dissipation over the fixture''s operating life. IP66 rating means the fixture is protected against dust ingress and high-pressure water jets, suitable for locations exposed to weather, wash-down, or irrigation overspray. IK09 rating means the housing withstands moderate mechanical impact.

Surge protection rated at 5kV line-to-line and 10kV line-to-earth provides a buffer against voltage spikes from lightning or utility switching events. This level of protection is appropriate for pole-mounted fixtures in open areas with exposure to electrical transients.

How This Fixture Is Commonly Used

Facility operators use this fixture to replace aging metal halide street lights while maintaining or improving light levels. The Type 3 optic is the standard choice for roadway applications where light needs to project outward from the pole toward the travel lane with controlled backlight.

When the optional photocell is installed, the fixture turns on at dusk and off at dawn without manual intervention or external timers. Where dimming is required for energy management or curfew schedules, the 1-10V input accepts signals from external controls.

The three color temperature options allow matching existing site standards or meeting specific municipal or organizational requirements. In retrofit applications, the 100V-277V input typically eliminates the need for voltage conversion when replacing HID fixtures.

Safety, Certifications, and Warranty

This fixture is ETL listed and rebate eligible. We back this product with a 5-year warranty.

The IP66 rating confirms protection against dust and water ingress in outdoor installations. The IK09 rating confirms the housing withstands moderate mechanical impact from incidental contact or debris.

Frequently Asked Questions

What wattage metal halide does this replace?
This 200 watt LED fixture replaces 400 to 1000 watt metal halide street lights.

What voltage does this fixture require?
The fixture operates on 100V-277V at 50-60Hz.

Is a photocell included?
The photocell is optional and available as an accessory.

What beam distributions are available?
Type 3 is standard. Type 2, Type 4, and Type 5 are available as options.

Is this fixture eligible for utility rebates?
This fixture is rebate eligible.

What is the warranty coverage?
This fixture carries a 5-year warranty.

Can this fixture be dimmed?
Yes, the fixture accepts 1-10V dimming signals.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.